How do you remove mildew from the rubber ring of a washing machine?

Play with Brother Sheng about household appliance cleaning.

The mildew on the rubber ring of the washing machine can be removed with baking soda, toothpaste, and 84 disinfectant.

1. Wash with baking soda, spray soda on the sealing ring of the washing machine, and then scrub it with a rag to remove mildew.

2. Clean with toothpaste, apply a certain amount of toothpaste on a paper towel, rub evenly and then apply it to the sealing ring of the washing machine, and finally wash it with water.

The disinfectant solution is poured on a paper towel with 84 disinfectant and rubbed into wet strips, pasted on the blackened place, pasted for 12 hours, and can basically be removed the next day.

Moldy solution to the rubber ring at the mouth of the drum washing machine:

1. Go to the supermarket to buy a special detergent for washing machines, and add an appropriate amount of warm water and detergent to soak the rubber ring according to the service life of the washing machine and the amount of dirt. If the dirt is difficult to remove, it is recommended to soak it for more time, and wipe it with a rag after soaking;

2. If you don't find a special detergent, you can use disinfectant to wet the paper towel, apply it to the moldy part, remove the paper towel after a period of time, and then wipe it with a dry paper towel, you will find that the mildew has disappeared;

3. Soak the inner cylinder rubber ring for a certain period of time with vinegar and water dilution solution or lemon juice, and then it can play a certain role in decomposing the dirt, and it is easier to clean it;

Fourth, disassemble the inner cylinder rubber ring, and then use a brush (toothbrush is also OK) with toothpaste to clean, toothpaste has a good ability to remove dirt.

5. It is recommended to clean the inner cylinder rubber ring regularly in the future, preferably once every three months, and do not let the dirt stay for too long, otherwise it will not only be particularly troublesome to clean, but also may cause some damage to the rubber ring.

It is best to use 75% medical alcohol to wipe for a period of time to prevent mold from multiplying and prevent mildew, if you use it for a long time, there are mildew spots in the rubber ring at the mouth of the barrel, wipe it with 84 disinfectant solution to completely eliminate mildew, 84 disinfectant is a strong oxidant. It has the effect of disinfection, sterilization and bleaching.

The drum washing machine sealing ring is moldy and damp, you can wipe it dry with the water of the rag sealing ring, the original mildew needs to be removed with the old housekeeper who specializes in removing mildew, the operation is quite simple, wait for 3 hours after coating to wipe off the mildew and it will be gone, and it can also inhibit the mildew and then grow, and prevent mildew for a long time.

The sealing ring of the washing machine is made of modified rubber, which is more difficult to clean when it is dirty. You can use a cleaning agent with a bleach function, such as 84 disinfectant, which is slightly more effective.

Usage: Spray disinfectant and cleaning agent directly to the dirty place, wait a while, rinse with water, scrub with a damp cloth, and generally can remove it, but you will generally see dirty traces, after all, the rubber is relatively soft. It may be a little lighter, and the smell is largely gone.

Front-loading washing machines have a musty smell and can be treated in the following ways:

Method 1When the drum washing machine is found to have a musty smell, or the washing machine has been used for about 15 days, you can perform the high temperature self-cleaning function of the drum washing machine once or twice, then the water temperature will be heated to 95 degrees, and the musty smell can be removed by cleaning at a high water level.

Method 2There is a washing machine cleaner on the market**, buy a bottle of washing machine cleaner and clean the washing machine according to its instructions, and also remove the musty smell of the drum washing machine.

Method 3Rubbing the inner bucket of the washing machine twice with a soft cloth dipped in white vinegar can also remove the musty smell of the drum washing machine.

In addition, do not close the lid of the drum washing machine immediately after each wash, but let the inner bucket air dry. This prevents musty odors in the drum washing machine.

How to remove musty odor from drum washing machine:

1. According to the capacity of the washing machine, pour half a bottle to a bottle of edible vinegar, pour it into the inner barrel of the drum washing machine, add warm water to a height of 3 or 4 barrels, and soak for 2 hours;

2. Then start the drum washing machine and rotate for 10 20 minutes, and the dirt in the moldy place of the rubber ring will fall off in fragments;

3. To remove the mold and mold of the rubber ring of the drum washing machine, the sewage should be discharged and then poured into half a bucket of water, add 1 4 bottles of "84 disinfectant", and start the washing machine for 10 minutes;

4. Drain the sewage, and then add water to rinse the drum washing machine to remove the musty smell.

Causes of mold and odor in washing machines:

The inside of the washing machine is relatively humid, and it is easy to cause bacteria to multiply if not used for a long time. This is usually due to the composition of dirt in tap water, free matter from laundry detergent, cellulose in clothes, organic matter from the human body, and dust and bacteria brought in by clothing, which multiply and ferment at room temperature. The most important thing to reduce the musty smell of the washing machine is to keep the barrel in the washing machine clean and dry.

The rubber ring of the drum washing machine is moldy, and there are many ways to remove it, so let's share my own method! Stir well with baking soda and white vinegar, then brush the moldy area with a brush, it will be clean quickly, and it is recommended that you try it too.

Just disinfect with 84 disinfectant.

To remove mildew from the rubber ring of the washing machine, you need to prepare the following materials:

Ingredients: white vinegar or bleach, clean cloth or sponge, water.

1. Prepare the materials and tools needed to make filial piety good.

2. Dip an appropriate amount of white vinegar or bleach on a clean cloth or sponge, apply it to the mold spots on the rubber ring of the washing machine and let it stand for 5 to 10 minutes.

3. Rinse the rubber ring thoroughly with clear and late water, and wipe the surface of the rubber ring with a clean cloth or sponge.

4. If there is still residual mildew, you can apply white vinegar or bleach again, and repeat the above steps for cleaning.

5. After cleaning, you can turn on the ventilation or use dehumidifiers and other equipment to keep the inside of the washing machine dry to avoid mildew again.

The washing machine rubber ring mold cleaning method is as follows:1. Wash with baking soda, spray soda on the sealing ring of the washing machine, and then scrub it with a rag to remove mildew.

2. Clean with toothpaste, apply a certain amount of toothpaste on a paper towel, rub evenly, and then apply it to the sealing ring of the washing machine, and finally wash it with water.

3. Homemade cleaning liquid, first mix white vinegar, cleaning socks and water, stir well, pour the cleaning supplies into the watering can, and then spray some detergent to the gap in the sealing ring of the washing machine, and then let it stand for a minute, and finally we scrub it with a rag, so that it is easy to remove the mildew on the sealing strip of the washing machine.

If the rubber ring of the drum washing machine is moldy, you can first use a wet rag soaked with water to wipe the dirt on the surface of the rubber ring, so that the rubber ring is also moistened at the same time. Apply the rubber ring mold remover to the moldy area of the sealing ring with a brush, wait for 10 minutes after brushing, and after waiting for 10 minutes, use a toothbrush to scrub the area that has been soaked with the mold remover.

Finally, wipe the dirt left after scrubbing with a rag, so that the moldy place of the plastic seal of the drum washing machine is cleaned.

How to maintain the washing machine:

1. After use, continue to open the water valve, and then select the washing program again, let the washing machine work again, and after it is finished, you can clean the filter screen.

2. It is more clean and hygienic to open the lid of the washing machine after use, but the fact is the opposite, after closing the lid, the inside of the washing machine is a closed space, so that bacteria are easier to multiply; Therefore, if the lid is opened to maintain a relatively open space environment, it can effectively prevent and inhibit mold.

3. There are many options for cleaning methods, and you can ask professional staff to clean them, which is the easiest for yourself, but the cost is relatively high. Empty noise.