How do you clean scorch marks on a baking sheet? The burnt marks on the baking tray cannot be cleane

To clean the baking tray burnt, we first sprinkle a layer of baking soda on the baking sheet, spray white vinegar evenly on it, wait for five minutes, and let the baking soda and white vinegar fully react. After five minutes, wipe with a scouring pad with a little force until all the baking areas are completely wiped off, and rinse the baking tray under the faucet, so that the baking tray will be as bright as new, simple, fast and efficient.

Where the grease is particularly heavy, you can use the oil fume cleaner to remove the heavy oil stains in the kitchen to remove the dirt in key parts. Place an old newspaper next to the oven door and clean the electric oven with a dried loofah or small bamboo brush.

Plug the drain hole in the sink, fill it with enough water to cover the baking sheet, pour in 1 2 cups of baking soda and 1 2 cups of white vinegar, mix well and soak in the baking tray for about 30 minutes for 1 hour. The oil stain softens at high temperatures, so it can also be soaked in hot water, and the decontamination ability will be upgraded. If the grease and scorch are too heavy, try to extend the soaking time, and soak the previous bowl in the sink, and it will be easier to brush it the next day.

After soaking the baking sheet, gently brush the baking tray with a vegetable melon cloth. It is recommended not to use a wire brush, as it may scratch the baking sheet, making it easier to trap dirt and dirt in the future, and even release harmful substances.

After brushing off the charred dirt on the baking sheet, wash it slightly again with detergent, drain and wipe dry. When the baking soda and white vinegar mixture is drained from the soaked baking sheet, you can also clean the water pipes by the way, which can be said to kill two birds with one stone.

You wipe back and forth with baking soda to scrub the glue of the place clean.

Yes, you don't need to use grease paper when baking bread on a good non-stick baking sheet. However, problems will also occur after brushing oil, some bread has no grease in it, and you brush the grease to affect the bread proofing and taste.

Brush the grease frequently, then do not clean the baking tray in time, the baking tray is greasy, scaling, odor, etc.

It is recommended to use an oilcloth or silicone pad, which is easy to clean, cheap and reusable.

Method 1:

Dish soap, which is also the most commonly used method by people. Mix dish soap and water in a ratio of 1:10, if there is a lot of oil in the oven, you can increase the concentration by yourself.

Spray the blended solution in the oven, and spray more where the oil is heavy. Then spread the kitchen paper towel in the oven where the dish soap has been sprayed and spray again. Put the prepared large bowl of boiling water in the oven, close the door but do not turn on the electricity, let it stand for 10 minutes, wipe it with a paper towel to remove all the grease, and then wipe it carefully with a clean kitchen paper towel to let the box dry.

Method 2: Baking soda. Baking soda is recognized as a good thing for removing oil and odor, and it is used in oven cleaning, and it also needs to be mixed with water to prepare a thicker state and evenly spread on the inner wall of the oven. After that, put the prepared large bowl of boiling water into the oven, close the door, but do not turn on the electricity, let it stand for about 1 hour, and wipe it clean with a kitchen paper towel.

Method 3: White vinegar. White vinegar is a common seasoning at home, in fact, its ability to remove oil is also very surprising. Mix white vinegar with water at 1:

1 ratio, put it in an acid-resistant and heat-resistant container, put it in the oven and heat it for 150 minutes, if you observe that there is less steam on the inner wall of the oven, you can extend the heating time appropriately. After the heating is completed, wait for the oven to cool, then open the door and take out the white vinegar water, and then gently wipe it with a kitchen wipe.

Hello, the stains on the baking tray are mostly the residue after frying and baking, if it is a stain left on the same day, it is good to clean, you can clean it with dish soap or dishwasher.

If it is a stain that remains the next day or a long time ago, you can add baking soda, dish soap and citric acid to soak for an hour or two before washing, if it is not clean once, you can soak it for a longer period of time to continue cleaning.

Oven tray paste cleaning steps method:

Step 1: Remove the detachable parts of the oven, such as the grill, baking tray and tray, and then scrub with a neutral detergent.

Step 3: The protective cover inside the oven and the outside of the heating tube must be gently wiped with a dry cloth, and cannot be scrubbed with an over-wet rag, so as not to affect the insulation of the stove head and cause leakage and short circuit. It should be noted that the oven should not be rinsed directly with water, except for the removable parts.

Step 4: If you find that the burner and protective net are dirty, it is difficult to wipe them clean with a soft dry cloth, and do not use steel wool balls, frosted cleaning balls and other cleaning tools with rough surfaces to wipe them. In case a steel wire or frosted particles fall into the stove, it will cause an unpleasant burnt smell from the barbecue, or cause a short circuit in the entire circuit, you can try to wipe it twice with a nylon cloth with strong cleaning power.

Step 5: After cleaning the stove head, you can start cleaning the shell and liner of the oven. The rag is dipped in the dilution of neutral detergent and wrung it out slightly, wipe the shell of the body with wet wipe, dip it in the dilution solution again after cleaning, wring it out slightly in the same way, wrap it around the hand and reach into the inside of the oven to wipe off the grease, and finally rinse it with water and wipe it dry, wipe it twice.

Use unwanted waste cards to remove scorched black, the effect is amazing! However, as long as it is burnt, it will damage the coating. Even if you remove it with a card, the original imprint will be almost gone.

The iron can be a little stronger, no matter what baking tray is soaked in water for a while, and then wiped off with a dishcloth, and the effect is better if it is hot.

Ingredients: 50 grams of water, a spoonful of white wine, a spoonful of white vinegar, a spoonful of baking soda, a scouring pad, a baking sheet, a steel wool ball.

1. First prepare a clean container, then pour in 50 grams of water.

2. After pouring the water, pour in a spoonful of white wine and a spoonful of white vinegar.

3. Pour in another spoonful of baking soda and stir well.

4. Dip a scouring pad in the prepared liquid.

5. After the scouring pad is wet, apply it back and forth on the baking sheet, making sure that all the grease stains on the baking sheet are coated with liquid.

6. After applying, silence for 15 minutes, and then wipe the oil stains with a steel wool ball.

7. After wiping with a steel wool ball, wash it with water again.

Put hot water into the plate, heat it up in the oven, and the oil will boil down.

2.Pour alcohol on the oily area and rub it with a rag to remove the oil.

3.Apply the salt solution to the blackened area and rub it off with a rag.

4.Rub the blackened area with vinegar, but the baking tray will become thinner after washing, so don't use it for a long time.