When the computer is turned on, it stays on the welcome screen for dozens of seconds before entering

Follow these steps to try it out:

1. Change the startup interface, enter the control panel - user account - change the way the user logs in or out - remove the two options in it - OK.

2. Click Start - Run - Enter msconfig - Enter - Select "Services" in the new window - Check "Hide all Microsoft services" - Keep only the services related to antivirus software in the remaining services, and remove all others - then select the "Start" tab, only keep tintsetp, ctfmon and a few related to antivirus software, and remove all the others - finally click OK, don't start again.

3. Enter the network connection and disable some network cards that are not usually used, such as 1394, wireless network, etc.

4. Restart your computer!

Also, you'd better check the hardware management to see if there are any installed devices or devices with problems (with exclamation marks) installed!

Hello landlord:Your startup item is antivirus、、Are you set?,Boot automatic antivirus、、、 so that it will be automatically disinfected every time you turn on the machine、、The time is naturally longer、、、 hope,,Thank you。

The following also makes sense.,You hit msconfig in the start menu to enter the startup item.,Tick off all the useless.,And then turn off the boot check and kill of the anti-virus software.,I want to ask.,What kind of anti-virus software do you use? If the Kaba time is a little longer, Rising will be better, 360 will be soon, if this is not good, it is a problem with your system, then redo the system! Oh yes.

Defragment first, and then disable some services that you don't use or manually, manage my computer, and find services.

There are only two possibilities for such a problem:

1. Software problems, this kind of problem is either your system registry is chaotic and the system is collapsing at any time. Or install too much software and take a long time to start the plug-in, which affects your boot speed. The reason why the 360 software prompts such an error is because 360 determines whether a computer is successfully booted at the moment when it is launched.

360 judges that your system is powered on for 30 seconds, which means that your computer has successfully booted up 360, and the reason why the desktop is not displayed is a plug-in or registry problem.

2. Hardware problems. The problem may be caused by bad sectors on your hard drive. Hard disk bad sectors are one of the most important hardware causes that affect the boot speed of a computer.

It's the equivalent of you want to read a book, and when you get to one of those places, you find that a page is missing. It will take you a while to deduce the general content of the missing part. And the hard drive bad sector is stuck there and has to wait a while to jump through, you can imagine this situation.

3. Solution: Reinstall your computer system. It is best to format all the partitions and then from the new partition.

If this solution does not solve your problem, then you should consider sending it for repair or testing with PE's own software; According to your description, it should belong to the first case. So you can basically solve it from the installation system.

4. Finally, Kingsoft is recommended for antivirus software.

Hope it helps!

Check the boot delay item, is it too much, and find the service item in my computer management; If it doesn't work, reinstall the system; You can't change the hard drive again.

Hello! I don't know what to install a system disk hard disk or anything like that.,It's just that a few days ago my computer also had a similar situation with the landlord.。 I moved all the larger files on the computer desktop to the D disk E disk, leaving only the shortcut on the desktop, and tidying up the desktop, it was completely solved.

I think the things on the desktop should be on the C drive, and the system will check these things when the system is started, and if the files on the desktop are too large, it will take up too much time.

The landlord may wish to try my method and adopt it if it works. If you can't solve the problem, I'll just say it for nothing.

Give it a try!

There are too many boot startup projects.

Method 1: Run the disk error checker. Method: Open"My computer", right-click the drive letter, and then select it"attributes"-"tools"-"Check for errors"-"Start checking", prompting two items of the disk check option"Automatically remediate file system errors"with"Scans and tries to recover bad sectors"Check them all and click on them"Get started".

It's a good idea to check all disks in this way. Check the system disk to be restarted (When asked whether to check when asked to restart, click.)"Yes"After restarting, it will be checked with a blue screen, wait patiently.

Method 2: According to your description, it is estimated that there are some problems with your hard disk, the computer will always access your hard disk during the boot process, and when your hard disk has a problem, it will stay there to access, when it reaches a certain time and will end the visit, this is only one of the possibilities, it is recommended that you deal with the hard disk to see if it can solve the problem.

1) Press copy f8 immediately after booting to the advanced selection.

The attack item appears in the let go bai, select "the correct configuration of the last du" enter to repair, zhi is not yet good to press f8 to enter the security.

There are many possibilities for this.

Not counting the poison and initiation items you said.

1. Start the dao moving item, not you see.

du piece, no poisoning, no zhi more settings, then it is considered to be dao

It's not a problem with dedicated memory.,I thought this situation had happened before.,It's not poisoned.,No add-ins.,Later, I didn't do it and used the win7 optimization master to optimize the system.,But the effect is not very significant.,Finally, I changed the system.,It's much better to add an inner slave bar。 Computers are consumables, and it's normal to have some minor problems with your hardware.

There are too many boot and reset items that cause loading.

If the production time is too long, the solution to BAI is: 1 Use 360 boot acceleration or DU-like software 2In the start, zhi, run, enter msconfig in the startup of the dao surface only cfmon and the others that i think are necessary are suspended in the cancel.

3.It can be changed in the registry, but this will damage the computer. Not recommended for you. 4. You can also redo the system.

Too much garbage. 360 Security Guards are clear. Turn off all startup items for anti-virus and security software.

It means that your computer configuration is not good.,Memory、CPU or something.。。。 There may be too many projects to boot up...

Clause. 1. There are too many startup items at startup, and use 360 or Optimizer to optimize them.

Clause. Second, the computer has not been cleaned for a long time and occupies memory.

Clause. 3. There is a virus in the computer.

Clause. Fourth, it may also be a system problem.

Clause. 5. There are too many things on the desktop or C drive.

There are too many boot startup items, which affects the boot speed. Clean it up with 360. If it doesn't work, let's reinstall the system.

Use 360 boot to optimize and optimize.

The computer is slow to respond.

General workaround:

1. Use 360 security guards to clean up system garbage and develop the habit of cleaning regularly;

2. Install the optimization master and optimize the system (recommended).