How to operate the timing of the air energy water heater, I always can t set it well?

1.Connect the power supply of the air energy water heater first, and then press the power button on the water heater to let it run.

2.On the main panel, find the "Timer" button and press and hold it for about 5 seconds to enter the time setting page.

3.At this time, the "time" display of the water heater is lit up, and the number representing the hour will be flashing. Then use the up and down keys to adjust the numbers.

The air-conditioned water heater is a new type of multi-functional water heater, which can release cold air like an air conditioner while heating hot water to meet the cooling needs of the kitchen. It works by absorbing the energy in the air and transferring it into heat to the water tank, heating the water, and at the same time releasing the low-temperature air that has lost a lot of energy into the kitchen for kitchen refrigeration. While the air loses energy and lowers the temperature, a large amount of water vapor is condensed, so the humidity of the cold air released is greatly reduced, which is equivalent to having the effect of dehumidification.

To turn off the scheduler, under Shutdown, click the timer to display the timer 1 Click to confirm Cancel, you can cancel the timer 1, and canceling the timer 2 is similar. Turn it on again after that.

Air energy water heaters.

The timer function needs to be set to within three hours, so that the temperature can be kept constant.

Gree Air Energy Water Heater Timing Setting:

When the standard energy saving mode is turned on or off, press the timer button to enter the timer setting interface. At this time, the "timer" and "on" are lit, and the clock hour flashes at the same time, press the " or " " button to adjust the hour time, and press the time button to confirm.

At this time, the clock minutes flash, press the " or " " button to adjust the minute time, press the timer button to confirm, after which "off" lights up and "on" off, while the clock hour flashes, press the " " or " " key to adjust the hour time.

Press the timer key to confirm, the clock minutes flash, press the " " or " " key to adjust the minute time, press the timer key to confirm, the timer switch time is saved and return to the main interface.

During the time setting timer, if there is no operation for 15 seconds, the timer setting will be automatically exited and returned to the main interface, and the timer setting will be invalid.

How to operate the timing of the air energy water heater, I always can't set it well?

How to operate the timing of the air energy water heater, I always can't set it well? 1.Midea air energy water heater timing operation method Select the "Timing" button, by increasing or decreasing, see the timing time to adjust to the desired time; Select "Water Temperature Setting", and then select the temperature you want to circulate to heat the beam; Select the "Water Level Setting" button and set the desired water level by increasing or decreasing it.

2.Why does an air energy water heater need to be set when the bracelet function It takes a certain amount of time for an air energy water heater to heat up to a temperature suitable for bathing. What if you want to be able to take a shower when you get home from work?

The timer function allows users to avoid worrying about forgetting to heat up and not being able to take a bath in time.

How to operate the timing of the air energy water heater, I always can't set it well?

Hello, the setting method is as follows: 1. Connect the power supply of the air energy water heater first, and then press the power button on the water heater to let it run. 2. On the main panel, find the "Timing" button, press and hold it for 5 seconds on the left and right, and you can enter the time setting page.

3. At this time, the "time" display of the water heater is lit up, and the number representing the hour will be flashing. Then use the up and down keys to adjust the numbers. 4. After the small leakage is adjusted, press the "timer" button, and the minute number will flash, and then press the upper and lower keys to adjust the number.

5. After the setting is done, finally press the "Timing" button to confirm, and then the system will tune to the main interface, and the setting is completed. If there is no action for more than 15 seconds during the setup process, you will be redirected back to the main page and the settings will be canceled.