Why does the computer show 40,000 x 80,000 32E8?

Because four times eight equals thirty-two, and ten thousand times ten thousand equals one hundred million, forty thousand times eighty thousand equals thirty-two billion, that is: 40,000 80,000 = 32 0000 0000, which is expressed by scientific notation as thirty-two billion.

Multiplication is one of the four operations, and when performing the four operations, it is necessary to operate first according to the parentheses, then multiply and divide, and finally add and subtract.

Extended information: Multiplication can also be thought of as calculating objects arranged in a rectangle (integer) or finding the area of a rectangle whose side length is given. The area of the rectangle does not depend on which side is measured first, which illustrates the swap property.

The result of the two measurements is a new type of measurement, for example, multiplying the lengths of both sides of a rectangle to give its area, which is the subject of dimensional analysis.

The meaning of multiplication.

3 5 means 5 3's are added.

5x3 means the addition of 3 5s.

Note:1In what multiplication is represented above, the factor after the multiplication sign is often used as a multiple of the factor before the multiplication.

2.See the wiki for definitions of multipliers and multipliers.

Another: The new meaning of multiplication: Multiplication is not a simple notation of addition.

Multiplication principle: If the dependent variable f is ,.... with the independent variable x1, x2, x3There is a direct proportional relationship between xn and each independent variable is qualitatively different, and the dependent variable f loses its meaning without any independent variable, then it is multiplication.

In probability theory, an event needs to be divided into n steps, the first step includes m1 different results, and the second step includes m2 different results,......The nth step consists of mn different results. Then this event may occur n=m1 m2 m3 ......mn different results.

Principle of addition: If the dependent variable f is the same as the independent variable (z1, z2, z3...)., zn) and the same quality exists for each independent variable, and the absence of any of the independent variables, the dependent variable f, which still has its meaning, is addition.

In probability theory, the occurrence of an event includes n-class outcomes, the first-class outcome includes m1 different outcomes, and the second-class outcome includes m2 different outcomes,......Category n-th outcomes include mn different outcomes, then this event may appear n=m1+m2+m3+......mn different results.

The above qualities are divided according to the role of independent variables.

This principle is a quantitative formulation of logical multiplication and logical addition.

Because the reason why it is displayed in the computer, 40000 80000=32e8, because in this way, it is better to calculate, because there are too many zeros in the back, and it is completely exceeded, so zero represents the letter e. It's very easy to calculate.

For display convenience, the zeros after the numbers will be displayed in such a way that e8 means that the numbers are followed by 8 zeros.

Because according to the multiplicative commutative law, 40,000 times 80,000 is 3.2 billion, and the specific solution is as follows:

40000x80000

4x10000)x(8x10000)

4x8)x(10000x10000)

32x100000000

3.2 billion.

Ten thousand times ten thousand is one hundred million (ten thousand ten thousand), and four times eight is thirty-two (four eights), so forty thousand times eighty is three and two billion.

Forty thousand times eighty thousand equals three hundred and twenty thousand.

You've seen it

You are poisoned pull.

Let a virus infect a file pull.

I've been dealing with this before.

1.Virus Cause: Use the latest anti-virus software for virus cleanup. Yes.

2.Recently installed software is causing the problem: In particular, check if the problem is caused by a newly installed plug-in.

Conflicts between plug-ins and plug-ins can easily cause problems with browser usage. In addition, to find out if it is a problem with the application, you can uninstall the recently installed software in the "Control Panel" and "Add and Remove Programs".

Destroyed: You can try the first page of the IEEtools in the tool software under my signature to fix it, this program has a function to fix double-click on the desktop IE does not respond.

If you still have problems, it is recommended to upgrade IE or reinstall IE. Upgrade IE, please arrive.

Reinstall: Method 1: Open the "Registry", find [Hkey Local Machine Software Microsoft Active Setup Installed Components], and change the dword value of isInstalled to 0.

Method 2: Put in the Windows XP installation disk, type "setupapi,installhinfsection defaultinstall 132%windir% inf" in the "Start Running" window.

4.System files are missing or corrupted: Use the sfc command to check and repair the system files, insert the installation disc into the CD-ROM drive, click "Start Run", type "sfc scannow" and press enter, let the system check and repair it automatically.

5.Can't be sure: completely reinstall the system, not overwrite the installation.

6.Hardware issues: The main possibility is poor or unstable contact with the memory, motherboard.

Depending on the situation, it should be a Trojan or a virus, try to kill the virus, and not reinstall.

It was an explorer program, and there was something wrong with that program.

Your computer is 64-bit, but your operating system is 32-bit, so your underlying instruction set is 32-bit.

The application software is 32-bit, it's fine, a lot of software is. 64-bit systems are compatible.

Because most of the software is 32-bit.

Read 3 directly2 and (8 times of 10) the product is no more than 40,000 80,000 = 32e8 =

= to the 9th power.

The display is due to the lack of digits on the screen, or the fact that the electronic ** is not in text format.

You are the calculator showing not enough digits, it should be, 3.2 billion.

Sometimes when the software tests the computer graphics card, there is a yellow exclamation mark in front of the graphics card, generally speaking, the graphics card is not very likely to be broken, because if the graphics card is broken, the display function is gone, or the display is not good, it cannot be used at all.

Generally speaking, there are two cases:

1. If the driver is not installed correctly, it will not be possible to use the graphics card to the maximum extent. For example, Jingying GTX650 is a graphics card, you need to install a NV driver, and if it's a win64-bit system, you have to choose the corresponding version of the driver, and if you choose the wrong one, you can't do it.

2. The hardware conflicts with the driver, resulting in the inability to use the graphics card normally. That is to say, the N card should be installed with the N card driver, and the A card should be installed with the AMD driver, so you must not install it by mistake.

Solution: Tools Ingredients:

Network, win7, driver wizard.

Method Steps:

1. There are two ways to update the driver, one is to use the driver wizard to automatically check the update, which is very easy, so I won't talk about it. The second is mobile phone update, here is how to update the mobile phone. First, go to Device Manager (Computer - > Properties - > Device Manager), open "Display Adapter", right-click on the graphics card device, and select "Update Driver Software".

2. Enter the update window and select "Tour your computer to find driver software".

This is to indicate that your graphics card driver has been updated.

Just cancel the boot and start the console.

1. Click "Start" - "Run" (or directly use win+r), and then enter "msconfig" and press enter. Select the "Startup" page in the window of the System Configuration Utility.

2. Similarly, there are a lot of programs that will start automatically when booting up here, and you can cancel the small tick in front of them, click OK.

3. You can also use PC Manager to clean up startup items, click "Startup Items" to disable unnecessary startup items.

The computer display icon is enlarged because the resolution setting of the computer screen is not suitable, and the specific recovery method is as follows:

1. Right-click on the computer on the desktop to open the properties options.

2. After entering the properties interface, click on the control panel on the page to enter the control panel.

3. After entering the control panel, click on the Adjust screen resolution option on the control panel page.

4. In the resolution setting interface, set the resolution of the computer to the recommended value and click OK to save the settings.

What is the reason why the icons on my computer screen are getting bigger?

First of all, use the right mouse button to click on the blank space of the desktop View There are three options for large icons, medium icons, and small icons, and click on the waiting icon or small icon.

If this is not the reason, the resolution of the screen may have been set incorrectly. Use the right mouse button to click on the empty space of the desktop screen resolution.

The steps to adjust are: Click the drop-down arrow on the right to use the resolution that matches the screen. In the menu that pops up, it is usually recommended that the most appropriate app. After confirmation, there will be a black screen for a while, and then there will be a prompt dialog box with the option to keep the changes, revert (countdown).

If this is not the case, it is caused by an abnormal driver of the graphics card device, which is often generated after the graphics driver has been updated. Just return to the drive in time. Start Control Panel System Device Manager If there is a yellow warning sign inside the graphics card adapter, it is an abnormality for the device.

Right-click on the graphics device Properties, Roll back the driver, follow the prompts to return to the driver, and restart the computer.

Resources.

The resolution has changed, the steps to recover, click on the blank space of the computer desktop, right-click, properties, and then click on settings, you can see the screen resolution, change to 1024*768. Generally, it is changed to 1024*768, but depending on the size of the screen, the landlord will try it.

Are you a Vista system? If it's Vista, you select the icon and push the mouse wheel!

The resolution of the monitor is not tuned properly.

This is to enable network discovery to detect hosts in the network, and of course, these hosts are also enabled for network discovery.

If you don't need it, you can turn it off, so you won't be noticed and nothing else will be noticed.

Hold down the Windows key (the tiny flag on the keyboard) and then press the R key, type, and then find SSDP Discovery in many services Double-click to close it, if not, restart the computer.

Do you use Wi-Fi or LAN? If you have a wireless network, you're looking at other computers on the same network as you.

Turn on the firewall, someone might be rubbing your net.