Restore the factory settings of the Deemite network set top box

If it is a network set-top box used by China Unicom users, the steps to restore factory settings are as follows:

Step 1] Press the "Settings" button on the remote control of the set-top box to enter the settings page;

Step 3] Move the cursor to "Advanced Settings" and click OK.

Step 4] Enter 10010 in the pop-up password box and click OK.

Step 5] Move the cursor to "Factory Reset Value" and click OK.

Step 6] Enter 10010 or 6321 in the pop-up password box and click OK.

Step 7] Click the OK button on the prompt "Whether to restore factory value" page and wait for the set-top box to restart automatically.

It is recommended that the network set-top box be factory reset:

1. Press the "Menu" button of the remote control of the set-top box;

2. Then use the up and down buttons of the remote control, select "System Settings", and "Confirm" button to enter;

3. In "System Settings", use the arrow keys to find "Factory Reset" and click "OK".

4. A password box for entering the password will pop up, and the password will be entered correctly.

5. A dialog box pops up again for the user to confirm whether to restore factory settings, and select "OK";

6. Successfully restore the factory reset system.

China Telecom provides the best quality network communication services, old friends for new phones, Internet age cash, 100 megabit broadband free experience, ultra-clear TV ITV, telecom activities can be directly queried through the telecom business hall or physical business hall.

1. Connect the set-top box and turn it on.

2. After powering on, wait for the "Data Import" to finish, and press the "Settings" button on the remote control when the next screen is displayed.

3. Enter the login interface and enter the password "10086" with the number key on the remote control, select OK, press the "OK" button to enter the system settings, if the password is not correct, please call the local mobile operator to ask.

4. Network connection settings, select "Wireless Connection", "Next" to enter the network search, select the "Search" button, press the "OK" key to search for the wireless network at home, enter the password and configure the display of advanced options, tick, select DHCP or PPPoe, depending on the WiFi situation at home.

Summary. Dear, hello : Dinuite network set-top box stays on the icon after booting, and there is no reset switch hole behind it when it can't be turned on, in this case, you only need to restore the factory settings.

Please strictly follow the following methods to restore factory settings: first, turn off the TV and unplug the power of the network set-top box; Then find the REST hole where a toothpick or paper clip is inserted into the set-top box; Then plug in the power supply, and when the TV sees the picture, release the REST button; At this time, the top box will be automatically started, we don't need to do anything, and when the network set-top box is restored to the factory, you can enter the interface smoothly. Thank you for your consultation, I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, please consult me again, and finally wish you a happy life!

After the Emite network set-top box is turned on, it stays on the icon, and there is no reset switch hole behind it when it cannot be turned on.

Hello, your question has been received, it takes some time to type, please wait a while, please don't end the consultation!

How can I get it back to use?

Dear, hello : Dinuite network set-top box stays on the icon after booting, and there is no reset switch hole behind it when it can't be turned on, in this case, you only need to restore the factory settings. Please strictly follow the following methods for factory reset:

First of all, turn off the TV and unplug the power of the network set-top box; Then find the REST hole where a toothpick or paper clip is inserted into the set-top box; Then plug in the power supply, and when the TV sees the picture, release the REST button; At this time, the top box will be automatically started, we don't need to do anything, and when the network set-top box is restored to the factory, you can enter the interface smoothly. Thank you for your consultation, I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, please consult me again, and finally wish you a happy life! <>

1. Turn on the switch of the set-top box and the TV, and wait for the set-top box to start;

2. After the set-top box is started, press the "Menu" button of the remote control of the set-top box;

3. Enter the "Menu", then use the arrow keys of the remote control, find "System Settings", and click the "Confirm" button of the remote control to enter;

7. Return to the TV big screen **TV.

Question: This is after the factory reset, enter the password directly in the home page status, but I don't remember the password.

The set-top box generally uses DHCP to automatically obtain the IP address by default, if you need to set the static IP address of the set-top box, you can try it.

1. Click the remote control to "Settings" at the bottom of the system interface, and click "Network" in the settings

2. Select "Wi-Fi" in the network and click on the remote control.

3. Select the wireless network you have connected, here you select "guoguo", click on the remote control, and then select the "IP acquisition mode" there, the current display is "automatic", click the right arrow button of the remote control, "automatic" will become "manual".

4. After the IP acquisition mode is adjusted to manual, you can set the static IP, and the remote control selects the IP address below, click in, and you can change it. The subnet mask, NMS, and DNS are all changed accordingly, and after the change, press OK to OK.

Summary. 1. Press the "Menu" button of the remote control of the set-top box;

2. Then use the up and down buttons of the remote control, select "System Settings", and "Confirm" button to enter;

3. In "System Settings", use the arrow keys to find "Factory Reset" and click "OK".

4. A password box for entering the password will pop up, and the password will be entered correctly.

5. A dialog box pops up again for the user to confirm whether to restore factory settings, and select "OK";

6. Successfully restore the factory reset system.

How to restore the factory settings if the password of the network set-top box is not correct.

1. Press the "Menu" button of the remote control of the set-top box; 2. Then use the up and down buttons of the remote control, select "System Settings", and "Confirm" button to enter; 3. In "System Settings", use the arrow keys to find "Factory Reset" and click "OK". 4. A password box for entering the password will pop up, and the password will be entered correctly. 5. A dialog box pops up again for the user to confirm whether to restore factory settings, and select "OK"; 6. Successfully restore the factory reset system.

Press the settings to display the login password, the password does not know what can not be entered, whether you are mobile or China Unicom's network.

Unicom,How to enter it incorrectly, how can I restore the factory settings。

China Unicom, you try this step.

Step 1] Press the "Settings" button on the remote control of the set-top box to enter the settings page; Step 2: Move the cursor to "More" in the lower right corner of the screen and click OK. Step 3] Move the cursor to "Advanced Settings" and click OK. Step 4] Enter 10010 in the pop-up password box and click OK. Step 5] Move the cursor to "Factory Reset Value" and click OK. Step 6] Enter 10010 or 6321 in the pop-up password box and click OK. Step 7] Click the OK button on the prompt "Whether to restore factory value" page and wait for the set-top box to restart automatically.

Step 1] Press the "Settings" button on the remote control of the set-top box to enter the settings page; Step 2: Move the cursor to "More" in the lower right corner of the screen and click OK. Step 3] Move the cursor to "Advanced Settings" and click OK. Step 4] Enter 10010 in the pop-up password box and click OK. Step 5] Move the cursor to "Factory Reset Value" and click OK. Step 6] Enter 10010 or 6321 in the pop-up password box and click OK. Step 7] Click the OK button on the prompt "Whether to restore factory value" page and wait for the set-top box to restart automatically.

It's that this interface has nothing.,It's just to let you enter the password.,Is there any other way to force a factory reset?

Do you type 10010 to try it?

Or 6321

No, I've tried it, you can call ** to consult!

Thank you. You're welcome!

Diyuite network set-top box flashing method and steps:

3. Insert the SD card into the card reader.

4. Run the flashing program, select the written USB flash drive as the SD card, and select the flashing package.

5. Click to start writing the card blindly, or write the flashing package.

6. After the flashing is completed, remove the SD card. Turn off the power of the set-top box. Insert the SD card Suizhou interface of the set-top box.

7. Turn on the power of the set-top box and start flashing automatically. The signal indicators will flash together, the signal light will not flash, and the flashing will be completed. The set-top box will automatically restart.