As soon as the computer is turned on and it is not fully started, it shows that there is a problem w

The system question is missing! It must have been caused by poisoning! It should be repaired with the Jinshan first aid kit! If it still doesn't work, it's better to install the system!

If the system is not toxic, it may be that the heat dissipation of the power supply, CPU, memory, graphics card, and motherboard is not good.

Use an eraser to erase the gold finger of the memory module and graphics card, and replace it if it doesn't work. Clean the motherboard and plug and unplug parts.

It is recommended to change the fan and power supply.

This can be repaired with the original installation disk of the system.

Hello! Generally, there are aspects to this phenomenon, one is hardware, and the other is software.

The main aspects of the hardware are: the memory module is broken, the memory quality is problematic, and there is a mix of 2 different brands of memory with different capacities, which is also more prone to incompatibility, and it is also necessary to pay attention to heat dissipation problems, especially after overclocking.

In terms of software, the above situation will occur if the resource is deadlocked and overflowing, and the system will remain stable. It can also be caused by poor compatibility between hardware devices.

If you want to solve it:

Method 1: The most effective and thorough method is this: register all DLLs at once

Run Entercmd Enter, enter at the command prompt.

for %1 in (%windir%\system32\*.dll) do /s %1

If you enter this command correctly, you will see a rapid scroll of the screen Otherwise, ......Otherwise, failure will not have this effect.

Wait slowly after entering, for quite a long time, be patient, until your indicator light does not flash before doing anything else, and then turn it on after it is finished.

Method 2: This is a typical problem There are many reasons for this problem. Generally speaking, it is to patch the system, replace the memory, and change the slot of the memory to solve the problem.

System patches as long as you go to Microsoft's official system update site:

That's it].

This is divided into software and hardware problems, the software may be because of some program problems, the hardware is likely to be a compatibility problem, or it may be that the memory compatibility is not good, if it can't be solved, it may be a virus, you can use the 360 first aid kit to enter the safe mode to check and kill the virus, if it still doesn't work, it is recommended that you reinstall the system, I have encountered this situation before, there is no more after reinstallation.

Check that the memory module may need to be replaced.

How have you been doing it lately? Try uninstalling all the software, patches, and drivers before the accident, and take a look at the following methods. If the fault persists, it is recommended to check and kill the Trojan first, and try to repair the system (you think about the recent operation, the failure will not happen for no reason, if you have any questions, please ask me for communication).

1. Please use the system's built-in system Kaihong to restore, restore to you when you do not have this failure to repair (or use the restoration software to restore the system, if you can't enter the system, boot and press F8 to enter the safe mode to restore the system).

2. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired ones.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

Hardware-wise, test if your CPU is too hot? Is there a problem with the hard drive and other hardware? If the memory is not large, it is recommended to add a memory module to have obvious results, and the monitoring of the antivirus tie-up software should be turned on as little as possible.

1. The impact of viruses or rogue software. All-round antivirus.

2. If there is a mistake in the startup item, press F8 after booting up, and select Safe Mode in the pop-up menu. Once you are in safe mode, enter msconfig in Start Run. In Startups, remove the tick in front of all startups. Save the exit after the reboot observation.

3. Consider the system damage and reinstall the system.

4. Consider memory or memory slot failure. Observe after replacing the memory.

5. Consider excessive heat generation and pay attention to heat dissipation.

6. Consider motherboard failure. Replace the motherboard to observe.

Explorer is a program that displays the desktop. 99% of the errors are caused by poisoning that causes the file to be abnormal. It is recommended to reinstall the system. There is repair software available online, though.

If you don't want to reinstall. Use Ctrl+Alt+Del. Open Task Manager. New tasks. Browse. Select the browser you want to open or repair software like 360. Do it.

1. It is recommended to enter the safe mode to see if it can be used normally, 2. If not, it is recommended to back up the important data files in the computer, and then reinstall the system.