How to set up TP Link TL WA933RE 450M wireless extender?

The specific operation steps for the TP-LINK300M wireless expansion chamber device are as follows:

1. First of all, we plug in the router at home.

2. Then we press the QSS button of the router, first press the QSS button of the router, and then press the QSS button of the extender.

3. So the next thing we have to do is press the QSS button of the extender, and we turn the extender behind it.

4. Then we press the QSS button on the extender.

5. If the light on the extender turns green, then it means that the Divine Shirt Wireless Extender is set.

6. Enter the mobile phone wifi at this time, then you can see the wifi on the extender, and you can connect.

Bought a TP-Link TL-WA932E wireless extender. How should I set up this wireless signal extender to extend the wifi signal on the original router? For details, please see how I introduced below!

1. Turn on your laptop.

2. In the pop-up dialog box, set the administrator password (that is, the login password) of the TL-WA932RE, and then click "Start Setting the Extender", as shown in the following figure.

Set the login password for the TP-Link wireless extender.

Tips: Please remember the administrator password you just set, and when you log in to the management interface of TL-WA932RE again in the future, you must enter the administrator password you just set to log in.

1. Automatically scan the signal.

After entering the setting interface, the TL-WA932RE extender will automatically scan the nearby WiFi signals as shown in the figure below:

TP-Link wireless extenders automatically scan the WiFi signal.

2. Select the wifi signal that needs to be extended.

In the scan result, select the wireless wifi signal that needs to be modulated to be extended (in this case: zhangsan).

Select the wireless network you want to expand.

3. Enter the password of the extended WiFi.

Enter the wireless password of the extended WiFi signal (in this case: zhangsan) - > set the wifi name of the TL-WA932RE extender - > and click Extend.

Fill in the password for the extended wifi signal.

Important note: It is recommended to set the Wi-Fi name of the TL-WA932RE extender to be the same as the Wi-Fi name to be extended, so that wireless roaming can be realized.

4. Wait for the expansion to complete.

The page prompts that the connection is in progress and the management IP address is obtained from the primary router.

As shown below: <>

The TP-Link Wireless Extender is connecting!

Plug the TP-Link TL-WA933RE into a power source and connect your mobile phone or mobile device to the wireless extender.

Use the browser on your phone to enter the configuration interface and set the administrator password.

Select the Wi-Fi signal you want to expand and enter the corresponding Wi-Fi password.

Expand for success.

The specific steps for setting up a 450M wireless extender and a WA932RE are as follows.

1. Select a suitable location, plug the wireless extender into the power socket, and the extender will automatically generate a wireless signal after plugging in.

2. Turn on the phone, click to enter the phone's wifi setting interface, and connect to the automatically generated wireless wifi, which has no password.

3. Open the browser on the mobile phone, enter the login according to the ** prompted in the manual, enter the extender setting interface, set up, and set a management password in the first step.

4. The second step is to enter the wifi scan, and the extender will automatically scan the surrounding wireless wifi signals.

5. After the scan is completed, find the wifi name you want to expand in the wifi list.

6. Enter the wireless password as prompted and click Next.

7. After the setting is completed, the phone will display the message that the setting is successful.

8. After the setting is completed, you can judge the status of the wifi by the color of the indicator light, orange means that the extender is too close or too far from the main router, and green means appropriate.

1. Plug in the power supply and connect the extender first (see the label for the SSID name), and then press the label behind the extender**: to enter the settings page. (You need to set a login password to enter).

3. Enter the wireless password of the original router and modify the wireless SSID name of this extender (you can use the original SSID directly without modifying it).

4. The extender will prompt you with the status indicated by the color of the indicator.

In addition, the more advanced options are in the advanced settings of the extender, such as changing the IP, name, etc., it is best to write down the IP address after the successful extension, so that you can modify the settings next time.

1. Plug the wireless extender into the power socket in a suitable position, and the extender will automatically generate a wireless signal.

2. Open the wifi setting on the mobile phone and connect to the automatically generated wireless, there is no password.

3. Open the browser, enter ** according to the manual, enter the extender settings, and set a management password in the first step.

4. Next, enter the wifi scanning, and the extender will automatically scan the surrounding signals.

5. After the scan is completed, find the name of the wifi you want to expand in the list.

6. Enter the wireless password and click Next.

7. Next, the setting is completed, and the setting success message is displayed.

8. Judge the status of wifi by the color of the indicator light, orange means that the extender is too close or too far away from the main router, green is appropriate.