How to use radiators correctly for the first time in the renovation of a new house?

Using radiators in winter can bring warmth and comfort to your family. Radiator Correct Usage:

Carefully cover the heater.

After heating and decorative cover, it will first affect the conduction, convection and radiation of heat, thus directly reducing the heating effect. And according to the test of relevant technicians, the room temperature of the closed radiator can be 3 -5 compared with the non-closed room.

Temperature setting should be scientific.

For customers who have just started to use the heating season, you can set the temperature of the heating wall-hung boiler a little higher, and wait until the indoor temperature rises to a stable level, and then set the temperature of the furnace a little lower.

The radiator heating temperature can be adjusted by the temperature control valve, close or lower the radiator valve of the uninhabited room, the housing area is larger, the room is more, and the permanent population is relatively small, then the radiator valve of the room that does not live or uses the frequency is low can be completely closed or smallened, which is equivalent to reducing the heating area and saving energy.

Indoor insulation should be done well.

Indoor heat loss in winter40 is related to insufficient sealing of doors and windows, especially in some homes with floor-to-ceiling windows. When decorating, choose good insulation materials for the wall, install sealing strips on doors and windows, and install double-layer or insulating insulation glass on the windows to enhance the thermal insulation of the house and reduce heat loss. Do a good job of indoor insulation, and the radiator system can also play a certain energy-saving effect when it is running.

The radiator cannot be changed arbitrarily.

When designing the installation position of the radiator, after careful survey and consideration, the selected position can ensure that the air convection and indoor temperature are relatively balanced in the whole space, and once the orientation is changed, the indoor temperature imbalance will be formed. Moving radiators and pipes at will may lead to water leaks and other conditions, bringing unnecessary losses to the home.

Maintain a certain amount of space for heat dissipation.

Furniture and radiators should not be too close together. Try not to place furniture such as sofas, beds, or tables in front of the radiator radiator, as the air convection around the radiator is obstructed, which will greatly affect the heat dissipation effect. In addition, if you are too close to the furniture, it may be difficult for the heat to dissipate freely into the room, causing the wood to become distorted and cracked.

Avoid opening and closing the wall-hung boiler frequently.

The wall-hung boiler is used as a heat source for the heating system, which does not need to be switched on and off frequently. Frequent switching and heating to the set temperature in a short period of time not only does not save energy, but also has an impact on the service life of the system. In order to save energy, the temperature can be adjusted to a low setting when you go out for a short time, so as to ensure that you can save energy and not damage the internal parts.

The radiator should not be drained frequently.

Some users change the hot water every once in a while in order to keep the inside of the radiator clean, which is not reasonable. Scale may affect the heating efficiency and service life of the heating system, but it does not mean that the water in the radiator needs to be replaced frequently, and frequent water changes may lead to an increase in oxygen content and accelerate the corrosion of the inner wall of the pipe.

For radiators in new houses, pay attention to the smooth flow of pipes and do not block them.

In addition, the first time you use it, you need to drain the water and let out the remnants of the pipe. Deflated, no gas.

Since it is a new house decoration, the radiator in Xi'an is to open the exhaust valve of the radiator before the pressure test before use, and discharge the excess air inside.

The first time you use the radiator, you should pump out the water in the radiator before the winter, freeze the radiator during the winter of the year, and press the radiator before using it to see if there is any blockage and leakage?

When the radiator is used correctly for the first time in the decoration of a new house, it must be exhausted to exhaust the gas in the radiator.

I think the radiator is used normally, that is, the way of normal maintenance, there are no special requirements, but you must pay attention to maintenance.

1.First of all, the valve on the heating pipe cannot be opened and closed at will. When the heating system is first run, it generally needs to be commissioned.

Each household should adjust the valve of each riser to the appropriate position in time, open the manual air release valve of each radiator to discharge the air collected in the radiator, or open the exhaust valve of the gas collection tank installed at the top of the system to exhaust the air until each radiator is warmed up, and the commissioning is completed. Once the commissioning is complete, the valve should be fixed and cannot be opened and closed at will.

2.Secondly, try to maintain a certain amount of heat dissipation space near the radiator in the room. Do not pile up debris on or in front of the radiator, otherwise it will affect the heat dissipation effect of the radiator.

3.At the same time, the radiator cannot be arbitrarily changed. The installation of radiators is organized in a position conducive to indoor heating, which can ensure that the air convection and indoor temperature are relatively average, and once the orientation is changed, an imbalance in indoor temperature will be formed.

On the other hand, once the pipes and radiators are moved, it is very easy to leak and cause unnecessary losses to the home.

Radiator initial heating debugging method.

1.How to install the radiator is very particular, the installation position of the radiator is designed by the designer, is conducive to the location of indoor heating, can be relatively balanced to ensure air convection and indoor temperature, if you change its location may cause indoor temperature imbalance. In addition, once the pipe or radiator is moved, it is easy to cause leakage, which will not only cause economic losses, but also may harm health.

2.If there is more hot water missing in the pipeline, it is necessary to supplement the cold water to keep the pipeline system under a certain pressure, and the water temperature in the pipeline will drop if the hot water is lost, and the heating effect will be worse.

3.Try to maintain a certain amount of heat dissipation space near the radiator in the room, and do not pile up sundries on top of the radiator or in front of the radiator, otherwise it will affect the heat dissipation effect of the radiator.

4.Before the radiator is run for the first time, it needs to be debugged, specific to each valve, and the air collected in the radiator is discharged until each radiator is heated up, and there is no leakage to basically complete, once the debugging is completed, the valve can no longer be artificially switched.

Correct use of radiator hair method.

1.The front of the radiator is away from large objects.

The radiator is radiant convection to dissipate heat, and its surroundings are more open to dissipate heat, so try to avoid placing large objects around it. Also try not to have outer packaging, obstacles and outer packaging will also affect the heat dissipation effect, the distance between the radiator and the wall is between 3 cm and 5 cm. Of course, in rainy weather, clothes generally do not dry thoroughly, so it does not have much effect if you put it on the radiator to dry.

2.Doors and windows are fitted with sealing strips.

Doors and windows are places where heat loss is high, and 40% of indoor heat in winter is related to window glass loss, especially in some homes with floor-to-ceiling windows. Installing or replacing seals on doors and windows to reduce heat loss is also a good measure to save energy.

3.Turn off the radiators in uninhabited rooms.

Turn off or reduce the radiators in uninhabited rooms first. If your house is larger, more rooms, and the population is relatively small, then the radiator valve of the room that does not live or is used infrequently can be completely closed or smaller, which is equivalent to reducing the heating area, not only saving energy, but also accelerating the heating temperature rise in the normal use of the space, reducing gas consumption.

4.Open the window for ventilation for no more than 10 minutes.

If the room needs to be ventilated, it can be controlled within 10 minutes when the window is opened, so that the heat loss is relatively small. It doesn't take longer for a room to be ventilated, so close the curtains when you end ventilation or sleep to prevent a lot of heat loss.

After installation, it should be injected with water and pressed, and it can be put into use if it is qualified. When using it for the first time, pay attention to opening the valve slowly, exhausting the air, and slowly heating and pressurizing.

When a new radiator is installed, the first way to use it is to exhaust the air and exhaust the air inside. Then you can put in the water and you're good to go.

Radiators were installed first. The work we have to do, it has to be done. Suppress work. Fill the heater with water, then stop the pressure for 20 hours to see if there are any leaks?

The general situation is to see whether the water is unblocked, check the exhaust valve, see if the exhaust is normal, and that's all!

Generally, after the heating is stopped, the radiator needs a certain amount of maintenance, but the maintenance of the radiator needs to be divided into different materials and regions. Steel radiators need to be maintained with full water to prevent the radiators from being oxidized and rusted, and radiators of other materials do not need to be maintained with full water; Generally, the combination of water and oxygen made of steel is easy to rust, so it is necessary to fill it with water to remove oxygen, or you can release the water, worrying that it will not be clean, there will be water or moisture in the pipe, and it can be dried as much as possible. If it's the north, let go of the water, and then use a heating boiler to bake it, and at the same time make the heating system open so that the water vapor escapes as much as possible, and the inside is as dry as possible.

If, like in the south, the climate is humid and dry maintenance is not suitable, the furnace water can be boiled before deactivation to remove dissolved oxygen, and then the heating system can be sealed.

1. Some users release the circulating water inside the radiator by themselves, resulting in the radiator not heating the phenomenon. The water inside the radiator is treated, there are some preservatives and chemical components in it, the user releases water by himself to cause the radiator to not be hot, and finally by adding softened water, so as to ensure that the radiator continues to dissipate heat, which causes a waste of resources, and secondly, the anti-corrosion water inside the radiator is harmful to the body, so we must not put the water inside the radiator without authorization.

2. Some users feel that the radiator is not hot and must be deflated on the radiator, resulting in the radiator valve becoming lax.

3. Some users feel that the design of the radiator pipeline is unreasonable or affects the line of sight, so they change the heating pipeline by themselves. The radiator design is measured and designed by the radiator when it is installed, and generally no unreasonable phenomenon occurs, and it is usually conducive to the location of heating, once the location is changed, it will cause a waste of resources and the heating effect is not as good as the original.

4. To make beauty for radiators, it is not that it is not good to do beauty, but according to the actual situation, some people think that the surface-mounted radiators are ugly, so they want to make the radiators invisible, so they decorate the radiators by themselves, which will definitely make the heat dissipation unable to achieve the expected effect.

6. Improper maintenance of radiators leads to more serious corrosion of radiators, and the maintenance methods of steel radiators and copper-aluminum composite radiators are similar.

Today's families pay more attention to the quality of life, and more and more floor heating and radiators are used in winter heating methods, radiators can be installed in new houses and old houses, but there are also many skills in the installation of radiators, and you can get a comfortable heating effect if you master it, on the contrary, you will leave a lot of hidden dangers if you make a mistake.

The following points need to be paid attention to when installing radiators:

1. Pay attention to the location of the installation, generally speaking, the radiator should be installed under the relatively low window sill, which is conducive to indoor convection, and can also heat the cold air from the outside, and also pay attention to the heating installation should not be too close to the furniture at home, otherwise it is easy to cause the deformation of the furniture, and it is easy to crack if it is wooden furniture.

2. When installing heavy radiators, we should pay attention to making a ground support for the radiator, sometimes the weight of many radiators is heavier, but many people will not install the floor bracket because of the trouble, which is actually not right, it is still necessary to do the ground bracket when installing the radiator, and remember not to mix different materials in the selection of radiators, otherwise it will also affect the stability of the heating!

3. Finally, it should be noted that in addition to the radiator is very important, other accessories are also equally important, and unqualified accessories are easy to have the risk of water leakage, so when buying accessories, you should also pay attention not to buy some inferior accessories in order to save money, and it is really worry-free when you use them in the future!

For many people, buying a house is a great joy in life, but in addition to telling each other, have you ever paid attention to the heating problem of the new house? Follow Jinjin to understand the following seven heating problems of new houses, which is likely to improve your quality of life to a higher level!

Pay attention to the configuration of the radiator, and generally calculate the heat load according to the amount of heat dissipation required per square meter. For example, if the heating energy of the district meets the standard working conditions required by the national standard, that is, the inlet water temperature can reach 95 degrees and the outlet water temperature is 70 degrees, the general configuration is 70W; However, in general, it cannot reach the standard working conditions, so it is necessary to increase the configuration, and it is recommended that you should at least configure it according to 100W;

To see whether the type of radiator is safe and comfortable, the installation position of the radiator should be reasonably arranged in a large room, and the heat dissipation should be evenly dissipated and safe and comfortable;

If the house has adopted heat metering, you should pay attention to whether the radiator has an adjustable temperature control valve, which can control the room temperature, so as to save money and convenience;

If the house does not use heat metering, you should check whether the installed radiator is suitable for heat metering. Heat metering charges are the general trend, but not all types of heat sinks are suitable for heat metering.

Find out if the radiator is decorative and how long it lasts. Some real estate developers only use radiators as necessary facilities, without thinking about whether they are beautiful and durable, and after buying such a house, buyers will have to renovate the radiators that are not beautiful, and replace the radiators that are not durable.

Radiator material, water quality of heating system and control method. The water quality requirements of radiators of different materials are as follows:

Wall thickness δ = steel radiator: pH = 10 12;o2≤；

Copper tube (extruded and stretched copper tube) products: pH=7; cl-、so42-≤100mg/l；

Aluminium products: pH=5; cl-、so42-≤100mg/l；

The steel pipe radiator with a wall thickness of δ can be unified with the steel pipe used in the heating system;

Steel and aluminum products with reliable internal corrosion protection can be appropriately expanded according to the reliability of the treatment process.

Therefore, when buying a house, we should not only pay attention to factors such as house type, orientation and environment, but also whether the house is energy-saving, the choice of radiator and other issues that are directly related to the cost of use are also crucial.