What to do if the glass of a Cartier watch is broken

Updated on vogue 2024-03-02
22 answers
  1. Anonymous users2024-02-06

    Severe damage to the glass will cause the watch to be unsealed, which will affect the waterproof function. From the perspective of the material of the watch glass, the plastic glass of the old-fashioned watch will not burst, while the mineral watch glass, especially the sapphire watch glass that is now prevalent, is more likely to burst. It was completely blown up, and the cracked damaged side was inward (towards the dial side), and glass shards were all over the dial.

    How to deal with glass breakage:

    1. Pull out the watch handle and let the watch stop.

    2. Beijing watch repair: how to deal with the broken glass of the watch? You must not dial the hands or adjust the calendar quickly.

    3. The watch should be placed flat (preferably with the glass facing down), and the watch should be placed flat until it is sent to the watch repair shop.

    4. Do not do violent vibration and shaking during this period.

    5. Instruct the watch repair shop to be careful not to let the glass chips hurt the dial and watch hands during disassembly and repair.

  2. Anonymous users2024-02-05

    Hello, the watch is broken, this situation is still more serious for the watch, and improper operation may also cause secondary injury. But the watch works properly or can be repaired. The first thing we have to do is to stop the watch first, do not shake violently, before sending the watch to the watch repair shop for repair, be sure to lay the watch flat (preferably glass side down) into the box, and do not produce violent vibration and shaking on the way to the repair.

    Then immediately send the after-sales service center to let professional technicians repair it for you, and you can also consult us on the homepage to understand the corresponding relief measures to avoid unnecessary trouble.

  3. Anonymous users2024-02-04

    1. Stop the watch: pull out the watch handle to stop the watch, so that the hands do not drive the glass chips and scratch the dial and the calendar.

    2. You can't dial the hands, you can't adjust the calendar, and you can't try to remove the broken glass of the dial by yourself.

    3. Place the watch flat (preferably with the glass side down) and put it in the box to ensure that the watch is not vibrate.

    Send it to the watch shop for repair, and the damage must be replaced.

  4. Anonymous users2024-02-03

    Hello, if the mirror wear is relatively slight, you can try the following methods:

    After the watch mask is scratched out of a lot of lines, you can drop one or two drops of water on the watch mask, and then squeeze a little toothpaste to wipe it, you can remove the scratches and make the watch mask as new.

    Of course, if the scratches are more serious, you can go to a professional repair point to find a professional repairer to polish the watch.

  5. Anonymous users2024-02-02

    You can go to the after-sales service of this brand for replacement, or you can go to the famous watch repair consultation for replacement.

  6. Anonymous users2024-02-01

    In order to drive the hands, the watch uses a beating method to make it turn by using the characteristics of a magnet. Therefore, if it is affected by strong external magnetic waves, it will not function normally, and it is also the cause of the watch to become faster, slower or stopped.

  7. Anonymous users2024-01-31

    The first is to stop the watch. Pull out the watch handle and stop the watch from running. Pulling out the handle allows the watch to stop, preventing the hands from scratching the dial and date by driving glass shards.

    When sending the watch to the watch shop, the watch should be placed flat (preferably with the glass side down) in the box, and no violent vibration and shaking should be generated during the repair. It is recommended to choose a professional maintenance center, and it is recommended to call ** for detailed consultation.

  8. Anonymous users2024-01-30

    Hello, glad to answer for you.

    When there is a crack in the watch cover, it will cause the watch to lose its water resistance, and it will also affect the appearance.

    Therefore, it is recommended to replace the surface mask in time to avoid accidental water ingress and unnecessary losses.

    When the watch completely bursts and the glass chips are all over the dial, it is necessary to immediately pull out the watch handle and let the watch stop to prevent the glass from scratching the dial.

    In the process of sending for repair, it is best to lay the watch mask down flat and try not to shake the watch.

  9. Anonymous users2024-01-29

    If the watch is accidentally dropped on the ground by us, then you need to pay attention and stabilize it as soon as possible. Perhaps the glass on it was damaged after the bump, and depending on the extent of the damage, there were scratches, cracks, broken corners, and complete shattering. If it's just scratches and cracks, you can still make do with it, of course, the watch is not good-looking, as for the corner fragments and the fully broken watch glass, you have to replace it.

    Let's talk about the case of a Cartier watch cracking case.

    1. If the degree of glass damage is very high, it is necessary for us to take measures quickly, because this phenomenon will lead to the unsealing of our watch, which will affect the resistance to water ingress. From the perspective of the material of the watch glass, the plastic glass of the old watch glass will not burst, while the mineral watch glass, especially the popular sapphire watch glass, is more likely to burst. In this case, we can see that it has been completely cracked, with the remnants of the rupture all facing inward (towards the dial side) and the glass pieces falling on the dial.

    If this happens, you must take immediate action.

    2. Pick up the watch handle and stop it, but be careful not to dial the hands or adjust the calendar quickly. The dial is laid flat (preferably glass side down) and the dial is kept flat until it is delivered to the watch repair shop. Don't do any violent shaking and shaking during this time.

    Tell your watch repairer to be careful not to allow glass shards to damage the dial and hands when disassembling and repairing. The reason for this is to keep the dial from further damage, as the dial tends to be worth more than the cup, especially for expensive watches. Because the glass is broken, the watch is still moving, and the pointer points to the glass that shatters the dial and the calendar dial, and as a result, the watch glass and dial have to be replaced together, which increases the maintenance cost.

    Tips: If you can't solve the above situation by yourself, you feel more troublesome and difficult to get, then please send the watch to the repair shop in time to deal with, if you have any questions, please call the service**, if you need to repair, please contact Cartier after-sales service center.

  10. Anonymous users2024-01-28

    In terms of the degree of damage to the watch glass, there are scratches, cracks, broken corners, or complete breakage. If the corners are broken and completely broken, the glass of the watch must be replaced.

    Table of spring defeat glass broken correct treatment method:

    1. Never dial the needle, nor can you adjust the calendar quickly.

    2. Remember to pull out the watch handle, let the watch stop, and send it to the after-sales center immediately.

    3. During the repair process, avoid severe vibration and shaking that will cause the watch to be damaged twice.

    The above treatment method is to prevent the hand from driving the glass fragments to damage the dial twice when moving, so as to avoid causing greater losses.

  11. Anonymous users2024-01-27

    If the tail hook of the watch movement is detached or cannot be locked, it is recommended that the watch can be sent to the maintenance place for a detailed cleaning and maintenance, so that the fallen watch can be used for a longer time.

  12. Anonymous users2024-01-26

    1.wear and tear of the splint;

    2.wear of the tail hook;

    3.Loose pull screws;

    4.Handle deformation and damage, etc.

    In the early days of old-fashioned watches, because the pull screws were used to fix the handle, most of them were caused by loose pull screws when they failed. However, today's watches are basically fixed by pulling the gear shaft.

  13. Anonymous users2024-01-25

    Go to the counter and ask how to deal with it, see if it is man-made damage in Baohe, and deal with the problem of repairing the watch.

  14. Anonymous users2024-01-24

    Of course, you have to go to the watch repair office, which can be cheaper. If you go to the after-sales service, it can be much more expensive.

  15. Anonymous users2024-01-23

    Hello, glad to answer for you.

    There are two cases when the handle of the watch falls off. The first case is actually not very complicated, it is simply the fall off of the watch handle. There is no bar attached.

    The second type of shedding is the shedding along with the bar. The first case is usually a rusty head. Fracture caused by the impact of an external force.

    If the head of the watch falls off, it is recommended that you take the watch to the after-sales center for repair and treatment to avoid serious damage to the watch due to improper operation.

  16. Anonymous users2024-01-22

    The watch handle is taken off and only repaired. It can be delivered to a designated repair point.

  17. Anonymous users2024-01-21

    Hello, glad to answer for you.

    When pulling out the dial hand, you must pay attention to the light force, and the parts in the watch are very small and thin.

    It can be said that the original normal watch, as long as you use a strong force to pull out the handle, there is a possibility of being pulled out, especially those thin or small watches, so remind everyone to pay special attention to this aspect of the problem.

    If you don't know this knowledge, you should try to send it to the maintenance department and repair it in time.

  18. Anonymous users2024-01-20

    Go to the after-sales service of the cabinet to see, it can be solved where the watch can not be repaired.

  19. Anonymous users2024-01-19

    It is recommended to send it to the after-sales service center for testing and repair.

  20. Anonymous users2024-01-18

    Pull out the whole (put the head up), especially in old watches. There are many reasons for the watch to drop the watch handle, such as: loose gear screws, broken gear tail hook or wear of the inner platform of the handle groove, wear of the T groove part of the main plate or the corresponding part of the bar plate, etc., in short, the gear tail hook can not reliably hang the handle groove.

    The reason why the watch watch falls off and how to dispose of it.

    The reason why the watch watch falls off and how to dispose of it.

    This is a relatively common fault in watches, because the handlebar is the most frequently used part of the watch, and this problem is also called dropping. But there are also two situations: one is just the watch handle head falling off, and the other is the watch handle head falling off along with the bar (rod).

    The former case is often caused by the buckle of the watch head or due to rust and external impact caused by breakage, the latter case is more complicated, but generally speaking, it is caused by the pull hook of the watch movement or cannot lock the groove of the handlebar. The causes of failure include wear and tear of the splint, wear and tear of the tail hook, loose screws, deformation and damage of the handlebar, etc.

    The reason why the watch watch falls off and how to dispose of it.

    In the early days, old-fashioned watches generally used pull screws to fix the handle, and today's watches are basically fixed by pulling the gear shaft, so many of the old watches fall off the handle due to loose pull screws. The handle rod of the watch is very easy to rust, after long-term use, the waterproof rubber ring in the handle head will age, resulting in poor sealing, and the watch water and air intake are the first to bear the brunt of the handle position. The corroded stem will become thinner at the root and lose strength; Then there's the kind of watch handle that is stiff (common in Roman and Mido watches).

  21. Anonymous users2024-01-17

    At the east end of Nanjing East Road Pedestrian Street, Huangpu District, take a look at the 10th floor of Hongyi International Plaza, Cartier Watch Repair Service Center. He has many years of maintenance experience for time error, watch water ingress, appearance damage, watch maintenance, and watch identification. They are all professional repairers of Swiss watches, face-to-face inspection, pricing, face-to-face maintenance, one-to-one transparent service.

    You can also make a ** consultation first.

  22. Anonymous users2024-01-16

    The brands displayed in Douyin are Dior's, many brands have star watches Cartier, Omega, and of course, Dior's star watches on Douyin. Dior's starry sky watch is not expensive, ** from more than 100-300 yuan. It is said that it is Dior's watch, but **Dior watch is not like this.

    **The original price is tens of thousands of yuan.

Related questions
9 answers2024-03-02

You can try using activated carbon: remove the plastic tape from the table, put it in distilled water filled with activated carbon, stir thoroughly, and pay attention to the moderate temperature, it should be effective, right? >>>More

4 answers2024-03-02

Toothpaste restorations are all deceptive.

18 answers2024-03-02

Hello, you can consider it from the following aspects:

1. Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power. >>>More

10 answers2024-03-02

Adjust the position of the lid, such as which direction the notch is facing, so as not to buckle the wrong position. >>>More

19 answers2024-03-02

It is recommended to go to the hospital for eye examination, and then do the ** plan according to the condition. Patients with fresh vitreous hemorrhage should be given bed rest and hemostatic drugs; For patients with old bleeding, drugs that promote turbid absorption should be used, such as lutein with liquid lutein, oral vitamin C, dibazole, etc., and intramuscular injection of iodine or hyaluronidase. In severe cases, vitrectomy may be used if it is generally ineffective. >>>More