How to renovate artificial stone, how to renovate artificial stone

Artificial stone renovation process: seamless treatment, cut leveling, coarse grinding, fine grinding, fine grinding, polishing, crystal surface treatment, antifouling treatment.

1. No seam treatment.

For some defects in the caulking operation, use the corresponding caulk to repair the joint.

2. Cutting and leveling.

After the stone caulk is completely dry, use 50 or 100 grinding discs to grind, this process will grind the cut edge, which takes a long time. The place with a particularly large cut should be treated with a hand throwing machine first, and then polished with a cutting machine; Then use a rough dish to smooth the marble glue outside the gap; Then polish the overall artificial stone floor, and polish all the high and low gaps.

3. Polishing the middle dish.

Using 150 discs, grind evenly from coarse to fine.

4. Fine grinding and polishing.

First use a suction machine to clean the stone surface stains, and then use 1000 to polish the finely ground stone, be sure to eliminate scratches and present the finish of the stone. After the above work is done, the stone renovation work is over, and after water absorption, dust removal, ventilation and drying, you can do the later crystallization maintenance work.

5. Crystal hard curing.

After the above process is completed, the surface of the artificial stone is preliminarily cleaned; Use special crystal hard powder for artificial stone, with crystal surface curing machine and cleaning pad to grind the surface of artificial stone to brightness, so as to increase the surface hardness and gloss of artificial stone; The weighting machine is used with steel wool, and the artificial stone maintenance and repair solution RH1 and RH2 are used alternately for polishing, and the order of use of the agent is RH1 RH2 RH3; rh1 rh2 rh3 each grinding process, each machine grinds in units of 2m2; After the crystal hard curing process, the gloss can generally reach more than 80 90 °;

6. Anti-fouling treatment (waterproof and oil-proof).

Use oil-based antifouling agent, with crystal surface curing machine, steel wool, cotton cloth, etc., to grind the surface of artificial stone until the ground is dry; At this time, the ground is neither hydrophilic nor oil-friendly, and has certain anti-fouling and anti-slip functions.

Artificial Stone Refurbishment Crystallization Company Beijing Professional Artificial Stone Refurbishment Company.

Beijing Volkswagen artificial stone refurbishment crystallization and polishing, artificial stone crystallization company specializes in artificial stone anti-seepage treatment.

Artificial stone is a kind of imitation granite, marble texture and beautiful decorative plate made by crushed stone, stone powder and resin, which is suitable for a wide range of applications such as dressers, countertops, kitchen stoves, etc.

Artificial stone refurbishment and artificial stone crystallization polishing process.

1. Preparation before the renovation of artificial stone.

Before the renovation of artificial stone, use a vacuum cleaner to vacuum in all directions, remove sand particles and hard items on the ground, and avoid secondary scratches on the stone; Ensure the smooth construction of the stone renovation.

2. Artificial stone cutting and renovation process.

If the brick joints are not neat in the countertop paving, polish and polish to achieve the level as the standard! Then the artificial stone crystallization treatment is carried out to form a hard and dense protective layer, which enhances the wear-resistant, anti-scratch and other effects of the artificial stone itself, and improves the gloss of the artificial stone.

Products used in artificial stone refurbishment and artificial stone crystallization.

Artificial stone refurbishment machine Abrasives Water absorber Granite crystal hard powder, artificial stone maintenance and repair liquid rh1 rh2, antifouling agent and other artificial stone special agents.

3. Seamless treatment of artificial stone (cutting leveling, coarse grinding, fine grinding, fine grinding, fine grinding, polishing, crystal surface treatment, antifouling) treatment.

Beijing Volkswagen Stone Renovation Company reminds you: the essence of artificial stone is cement, resin glue, gravel and other mixed processing; Its material is emerald and prone to scratches. (For example, the kitchen uses a protective film on the surface to effectively prevent the invasion of oil smoke).

Artificial stone crystalline polishing.

Use crystallization professional polishing machine, 3M cleaning pad, crystallization powder and liquid mixture; Crystallization polishing is performed.

Artificial stone refurbishment, anti-seepage and anti-slip process.

Use Hengli oil-based antifouling agent, with crystal surface curing machine, steel wool, cotton cloth, etc., to grind the surface of artificial stone until the ground is dry; The test can be done on the spot, and the water and oil are poured on the surface of the artificial stone, and it will be found that there is no sign of seepage, which has a strong anti-fouling and anti-slip effect.

Artificial stone can actually be refurbished, have you heard of it? If someone in your home holds a fake stone, and it has been used for a long time and needs to be renovated urgently, it is better to use the method I introduced below. Guaranteed to keep your artificial stone shiny as new.

Artificial stone renovation method.

1. Professional cleaning. This is a method of cleaning different causes of stone disease and different objects. We have discussed the cleaning technology of stone or stone artifacts many times, and here we mainly focus on the cleaning of stains that have penetrated deep into the micropores of the stone on the decorative stone, which we call the "deep cleaning" of the stone.

Generally speaking, deep cleaning of stone should include at least the following three steps: the cleaning agent enters the micropores of the stone through the penetration process; The cleaning agent has a physical or chemical effect with the dirt molecules in the micropores of the stone; Residues after cleaning are removed by steps such as aspiration or dilution.

2. The first and third steps here are the basic operations necessary to complete deep cleaning, and the second step is the cleaning agent that can interact with the dirt molecules, which needs to be carefully designed and experimented according to the nature of the dirt, the material of the stone and the convenience of the treatment process.

Here, chemistry has a unique effect. 3. At present, we have cleaning agents for cleaning rust macula, organic stains, salt spots and white spots, some water stains and water spots, etc., and we are continuing to improve and develop new cleaning agents. In addition to the common chemical cleaning methods, we are experimenting with safer physical cleaning methods, such as vapor flow, particle flow, electrochemical, ultrasonic or laser.

4. Attention should be paid to the following problems in the deep cleaning of stone:

Tests should be done first. The "symptoms" of stone are very different, for example, there can be many kinds of deliquescent salts that form water spots. Therefore, without knowing the specific cause of the smudge, we advocate a small experiment first.

Choose your cleaning agent carefully. Inferior cleaning agents are often some strong acids, which are likely to cause more serious stone diseases, such as surface loss and chalking, water spots and saline spots, loose dissolution and yellowing, etc.

Therefore, it is recommended that users should first choose high-quality products from reliable manufacturers; Secondly, the part that is not ready to be cleaned should be protected before the cleaning treatment, and the residual chemicals should be removed after the cleaning treatment is completed; In addition, the cleaning of stone cultural relics should be subject to the demonstration of relevant experts. The above is an introduction to the renovation method of artificial stone. First of all, we should have the necessary cleaning agent.

Ideally, we can contact a company that specializes in refurbishing stone.

Da Hong Xianhua] artificial stone will be deformed after a long time. The wall is recommended to be made of marble, artificial stone will be deformed for a long time, thermal expansion and contraction, and the gloss of artificial stone will fall after a long time, and can only be replaced, and marble can be directly polished to make crystals like new 1, at present, more and more natural marble is selected for decoration, compared with artificial stone, natural marble is strong and wear-resistant, generally will not seep stains, and direct sunlight will not change se. 2. Artificial stone is not durable enough, easy to scratch, broken, aging, and some will be deformed after long-term use.

Many people think that the radiation of natural marble is harmful to the human body, in fact, the common marble radiation on the market is very small, and it can be used with confidence, and the radiation of white SE is very small, and the radiation of color SE is slightly larger. 3. Now the materials for decorating bay windows are not only marble and artificial stone, but also ceramic tiles, solid wood, sauna boards, etc., which can be selected according to personal preferences. Be sure to choose a brand when buying materials, otherwise it will cause a lot of trouble.

Artificial stone is made from an unnatural mixture, such as resin, cement, glass beads, aluminite powder, etc., plus crushed stone binders. Artificial stone (also known as"Artificial marble") is a new type of composite material, which is made by mixing unsaturated polyester resin with fillers and pigments, adding a small amount of initiator, and passing through certain processing procedures. In the manufacturing process, with different pigments, it can be made into products with bright colors, luster like jade, and similar to natural marble.

Because of its non-toxic, non-radioactive, flame retardant, non-sticky oil, non-seepage, antibacterial and mildew-proof, wear-resistant, impact-resistant, easy to maintain, seamless splicing, arbitrary shape and other advantages, it is gradually becoming a new favorite in the decoration building materials market.

Artificial stone products are easy to manufacture, short production cycle, low cost, and widely used in various indoor and outdoor architectural decoration. Artificial stone came out in the United States 30 years ago, and the earliest use of artificial stone products as decorative materials in China was in some developed coastal cities in the mid-90s, and it was widely popular a few years later. Now this craze is spreading to small and medium-sized cities in the mainland.

Product features: light weight (compared with natural stone), high hardness, oil resistance, dirt resistance and corrosion resistance. The thickness of the plate is uniform, the gloss is good, the light transmission effect is obvious, no deformation, fire and anti-aging, no radiation, anti-penetration, etc., which can be bent at will according to the needs of customers, seamless bonding, and truly achieve the realm of natural nature.

How man-made diamonds are made:

Step 1: Prepare the charred coals (burned).

Step 2: Put the charred coals (burned) into the peanut butter.

Step 3: Prepare a box of ice cubes and put coals in peanut butter. Put in the first layer of ice. Ice cubes from the 2nd layer are placed on top.

Step 4: Take out the coals and put them in clean water to wash.

Resin + quartz powder, proportionally blended and pressed.

I worked in an artificial stone processing plant for a few days, and when I saw them, I used resin glue mixed with calcium powder or aluminum powder, adjusted the proportion, added curing agent, stirred, and then evenly sprinkled on the large glass board, and placed in a machine the size of a double bed to vacuum (vacuum to prevent artificial stone from having small bubble eyes) This process is mainly to mix the proportion of curing agent and vacuum time, which must be mastered, otherwise it will not be artificial stone, but a large steamed bun.

How to deal with the dirty surface of artificial stone Hello kiss! Soak a scouring pad with ordinary kitchen utensils, pour a little dish soap on the artificial stone countertop, or pour it on a scouring pad. Then wipe it with a scouring pad and the countertop will be as clean as new.

Go to the pharmacy and buy a bottle of hydrogen peroxide, sprinkle it on the stain, and preferably overnight and then go to the Slippery Pie to use it to suck out the dirt inside. It works very well, if it doesn't work once, use it a few more times. There are special artificial stone cleaning products, which work very well and are sold online and in supermarkets.

Penetrating stains appear on artificial stone, surface treated with bleach or other chemicals, and then floor wax can be applied.

1. Bulging treatment: The water flowing out of the 6mm hole at the artificial granite drum is sucked clean and dried with a suction machine.

2. Glue injection treatment: use water-based epoxy glue with a high-pressure syringe to inject glue into the artificial granite hole, to inject to saturation, water-based epoxy glue is hydrophilic, can absorb a small amount of excess water in the hole, 24 hours after the water-based epoxy glue is completely cured.

3. Cutting and repairing: use 307 unsaturated polyester resin and artificial granite powder of the same color to stir evenly to repair the cracks and holes of artificial granite grinding blocks. After the glue is completely dry, the cut is leveled using a diamond shear abrasive.

4. Coarse grinding: the use of diamond resin hard abrasives coarse grinding water supply should be large, each abrasive should be thoroughly absorbed after grinding, check whether the deep scratch left by the shear abrasive is ground off with 50 abrasives, and so on, the machine takes the tic-tac-toe grinding, and the rough grinding accounts for 45% of the overall grinding time, which is the key link to ensure the quality acceptance of the completion of the project.

5. Fine grinding: using diamond resin hard abrasive, fine grinding accounts for 35% of the overall grinding time, and the first light appears after fine grinding to 500, and the gloss can reach 50 degrees after fine grinding to 1000.

6. Fine grinding: the use of diamond resin hard abrasives or diamond resin soft water grinding discs for grinding, fine grinding accounts for 20% of the overall grinding time, the gloss is not high after fine grinding, but the surface density of artificial granite is improved, and the polishing lays a solid foundation.

7. Polishing. The power is more than 2hp, the speed is 175---210 rpm, the weight is 70 kg, the animal hair pad with 70% animal hair content is polished and polished with polishing powder or polishing slurry and a small amount of water, and the surface gloss of artificial granite can reach more than 80 degrees after polishing.

8. Crystallization hardening treatment: the power of the crystal surface machine is more than 2hp, the speed is 175---210 rpm, the weight is 70 kg with the cleaning pad (white or red), and the steel wool is selected (1) The steel wool disc is evenly rolled and tiled on the white or red cleaning pad, and the crystal surface hardener is evenly sprinkled on the surface of the artificial granite, and the crystal surface hardener is evenly sprinkled on the surface of the artificial granite, and the crystal surface machine is started to walk meters wide and long, and the repeated walking 6 times round trip, the heat is generated by the friction between the steel wool and the surface of the artificial granite. A small amount of resin reacts to produce a silicon fluoride crystal layer, which is vitreous, with high hardness, wear resistance, transparency, water resistance, anti-fouling, anti-slip and other effects.