-
The purple clay pot I just bought.
Relatively speaking, it will be more dry and more angry.
The purpose of boiling the pot is to remove the earthy smell in the mud, polish the residual sand particles, grease, etc., so that the pot is more suitable for making tea and moisturizing.
The purple clay pot has good thermal insulation performance and good air permeability, which is more suitable for brewing semi-fermented or fully fermented tea, such as black tea and oolong tea.
Pu'er tea, etc. In addition, the corresponding vessel type, mud, etc. will affect the tea soup.
The taste, the texture.
The purple sand pot serving a tea pot is not to highlight the nobility and delicacy of the purple sand pot, mainly because of the double porous structure of the purple sand pot, which is good at absorbing tea soup and tea gas, so when making tea with the purple sand pot, the type of tea selected should not be too miscellaneous to prevent cross-flavor. In this way, the brewed tea soup can maintain the freshness and purity of the original flavor.
Specific steps to boil the pot:
1. Rinse the pot.
Rinse the newly bought purple clay pot with clean water, rinse it clean, and then rinse it with hot water. - pour hot water on the purple clay pot, and the purple clay pot begins to have a good adsorption effect).
2. Boiling pot with water.
Take a clean pot, put the cleaned purple clay pot in the pot and boil it with water for about 15 minutes, take it out, cool it and rinse it again.
3. Tea kettle.
Put a pot of water and put the tea leaves you want to raise this pot into it (if your purple clay pot is not only brewed with a taste of tea, or the tea leaves to be brewed are more valuable, it is recommended to use tea leaves with similar aroma to boil), wait for the water to boil and put the pot in, boil for about 15 minutes, and take it out.
4. Soak in hot water.
Soak the purple clay pot boiled with tea leaves in hot water for about 15 minutes and rinse it well.
Through these four steps of the correct way to open the pot, you can basically remove the fire and dryness of a newly bought purple clay pot, and it will be better to maintain when you use it in the future, and the pot will slowly understand your mind.
-
Is it better to buy a new paper sand pot to store it in the lake or not? The problem is this. When the newly bought purple clay pot is stored, it is better to open the pot, because it is open to the human body.
Negative things can be distributed. If you don't want to open it, it contains those things that are not good for the human body. When you use it, it will be absorbed by the body, which is the worst for the body.
Therefore, the paper sandpot I bought is still open when it is stored.
-
There are many ways to boil a pot, but I offer two methods based on my experience.
1. Simple and concise method: first rinse the new pot with clean water inside and out, then put it into the pot and add some tea leaves to brew. After about 15 minutes, stop the fire and soak until warm, take it out, let it cool naturally, rinse with clean water and use.
2. Deepening the Baptism Method:
First rinse the new purple clay pot with clean water inside and out, pour the boiling water into the boiling water after pouring the dry water until it is full, pour out the boiling water after the whole pot is fully heated, and put it into the refrigerator to freeze it after it is dry, take it out after about 20 minutes, and then flush it inside and out under the faucet, wash and pour the dry water and then inject the boiling water to the full, pour out the boiling water after fully heating, and put it into the refrigerator to freeze after drying, so that it can be used to make tea and drink after repeated operations about three times.
If you are a pot lover, please use the second method, the reasons are: 1. The purple clay pot is fired at a high temperature of more than 1,000 degrees, and the finished product feels hard. Clause.
Second, because the characteristics of the purple clay pot is that the pores open when it is hot, and shrink when it is cold, after the above methods, the kiln ash and impurities that stick to the pot after firing can be forced out and cleaned, and the effect of raising the pot will be better and faster.
-
Explain how to open the purple clay pot for tea soup.
-
Before a new pot is used, it needs to be processed, and this process is called boiling the pot. There are many ways to boil a pot, and here is one.
1. Boil in plain water for at least an hour. The specific method is to separate the lid from the body of the pot, put it in a pot of cold water, place the pot on the stove, and slowly heat it to a boil over a low fire. Turn off the heat after 1 hour. In this step, the pores of the pot body can release the earthy flavor and impurities contained in the pot through thermal expansion and contraction.
2. Put the boiled pot in white water and a piece of old tofu into clean water to boil in the same way as above, at least one hour. This step is called de-ignition and is designed to remove the heat from the high-temperature calcination during pot making.
3. Put the pot above and a piece of tender sugarcane head into clean water to boil, the method is the same as above. At least an hour.
4. Put the pot above and the tea leaves into clean water to boil, the method is the same as above, at least one hour.
After completing the above four steps, the purple clay pot can officially start to use.
-
Be sure to boil the pot. The difference is that you can't make tea without opening the pot. The easiest way to open a teapot is to use your index finger and thumb to pick up the lid of the teapot.
-
Need to cook.
A newly baked purple clay pot is not lusterful, and it cannot be used directly to make tea, so a series of treatments should be carried out before the new purple clay pot is maintained, and it is called "boiling pot" by experts.
The fundamental method of raising a pot:
1.After the purchase of the new pot, you can use a fine abrasive cloth to rub it slightly, do not use a coarse abrasive cloth to polish it, to hurt the epidermis (some pot authors have been treated when they make a move), first wash with water or cloth to wipe off the dust on the surface and the pottery crumbs inside, and then put it in a more soluble tea pot, or in the tea pot, boil over low heat, you can turn off the fire soon after boiling, simmer the pot with residual heat until the tea is slightly cool, and then ignite the fire to boil, so repeatedly, you can make the new pot taste of the earth exhausted, and also make the new pot nourished for the first time.
2.Regardless of the new pot, the old pot, after cutting the tea with boiling water, the surface temperature of the pot body is higher, at this time, you can use a wet wool cloth, or a clean wet cloth, wipe the pot mention, watermark rotary wipe and dry, repeat many times, after the pot temperature drops slightly, you can also use your hand to rub it, because the palm of the hand has oil and sweat, which is conducive to the smooth body of the pot.
3.The teapot is not used for a long time, or the tea residue is not poured out in time due to negligence, mildew or peculiar smell, after eliminating the mildew mutation of the tea residue, fill it with boiling water, shake it a few times and pour it out, and then submerge it into the cold water, the peculiar smell can be placed, if it does not work once, it can be repeated 2-3 times, there will always be a satisfactory effect, and there is no need to worry about the teapot will burst due to the sudden change of heat and coolness.
4.The teapot is most afraid of getting dirty with oil. If the body of the pot is stained with oil, you can wipe it off by rubbing it by hand, if the oil stain is too heavy, you can also use a muslin cloth slightly dipped in detergent to gently wipe it, and then rub it with your hands to make the body shine and appear intrinsically beautiful.
5.Do not store the tea grounds in the pot for a long time to raise the pot. Although the purple sand teapot has the saying that the more you stay and is not rancid, it will still have a peculiar smell after a long time, especially in summer, the tea leaves are more prone to sour and rancid, which will affect the formation and accumulation of tea mountains in the pot.
-
The newly bought purple clay pot does not need to be boiled in boiling water, nor does it need to be boiled in tea leaves, and you can open the pot without tools!
-
Wash and dry, then put it in a glass case.
Purple clay pot, produced in Yixing, China, purple clay pot is a precious tea set. Many tea lovers like to collect purple clay pots, but they don't know, today I will talk about how to raise purple clay pots. The maintenance of the pot is generally known as raising the pot, and the purpose of raising the pot is to make it more able to contain the fragrance and taste, and make the pot glow with its own simple luster. >>>More
The purple clay pot is a very common tool for making tea, and many people who like to taste tea will collect a purple clay pot. The purple clay pot is loved by many tea lovers by virtue of its easy-to-store fragrance. However, the purple clay pots of different qualities are also uneven, and the good quality purple clay pots are even more valuable. >>>More
Chen Yuncai, born in 1965, a national arts and crafts artist, the small pot is around 1500 5000, the medium pot is about 5000 15000, the large pot is around 20000 100000, and the auction price of the medium product is 10000 yuan at the Jiade auction house. >>>More
How to identify a purple clay pot handmade purple clay pot or semi-handmade.
1. Touch with your hands: Although a good purple sand pot feels frosted to the touch, it will not have a particularly prickly grainy feeling, and the graininess of the real purple sand pot is that very slight feeling. >>>More