What to do if Carl F. Bucherer watch warranty glass is worn

How to deal with the wear of the watch glass:

If the watch is accidentally scratched or cracked by a key, it can be used temporarily. However, for watches with precision operation, the waterproof and dustproof performance of the watch will decrease at this time, and it should be replaced by a professional watch store as soon as possible. When there are scratches or slight scratches on the watch mirror, you can first drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe it back and forth with a cotton ball to remove the scratches and make the watch glass as new.

In the case of severe damage such as explosions, broken corners and severe breakage, and debris all over the dial, the following measures need to be taken immediately: the first thing to do is to stop the watch. Pull out the watch handle and stop the watch from running.

Pulling out the handle allows the watch to stop, preventing the hands from scratching the dial and date by driving glass shards. Never dial hands and fast-setting calendars, and never try to remove broken glass from the dial yourself. When sending the watch to the watch shop for repair, the watch needs to be placed flat (preferably with the glass side down) in the box, and there should be no violent vibration and shaking during the repair.

During the repair process, the maintenance personnel need to be told not to let the glass shards damage the dial and watch hands.

Hello, it is recommended to check the warranty copy that comes with the purchase of the watch, the normal warranty copy has a service address, or find a regular name table service center to test, the maintenance technology and service are very good shop: Room 3006, Kunhe Center, Block C, Hangzhou Building, Huancheng North Road, Xiacheng District, Hangzhou.

If the case and strap have deep pits, use abrasive wheels and felt wheels to remove the dents, and use steel wire wheels for sandblasting (matte effect); General polishing with fast (2800 rpm), sand drawing with slow speed (1400 rpm); If the watch parts are only slightly scratched, the use of polyester cloth wheels has a better effect and higher polishing efficiency.

When a watch is scratched, it can be polished, worn, and polished to make the worn watch look new. If there is a serious bump that causes a hard injury, a smash and a dent, the repair process is relatively complicated.

It is located in Room 1207, Block B, China Resources Building, Mixc, Jianggan District, Hangzhou City, Zhejiang Province, with superior geographical location and convenient parking. Our store specializes in the maintenance of famous watches [time failure] [cleaning and maintenance] [replacement accessories] [watch water] [replacement strap] [polishing and beauty] [appearance damage] [detection and identification] and other maintenance projects, to obtain more relevant information and its **can**consultation, support SF mail, support SF mail, support SF mail, we will cancel the service for you!

The watch glass is broken! What should I do? Mild: When the watch is accidentally scratched or cracked, it needs to be replaced in a professional watch store as soon as possible, although it can be used temporarily, but it is not waterproof or dustproof, and it will affect the use of the watch with precision operation.

Severe: Bursts, crumbling corners and severe breakage, debris all over the dial, take immediate action as follows:

1. Stop the watch: pull out the watch handle to stop the watch, so that the pointer does not drive the glass chips and scratch the dial and the date disc.

2. You can't dial the hands, you can't adjust the calendar, and you can't try to remove the broken glass of the dial by yourself.

3. Place the watch flat (preferably with the glass side down) and put it in the box to ensure that the watch is not vibrate.

4. Send it to a professional watch shop for repair immediately.

Treatment: 1. When there are scratches or slight scratches on the watch mirror, you can drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe it back and forth with a cotton ball to remove the scratches and make the watch glass as new.

2. If it is serious, you can polish it.

3. Find an official after-sales service center.

Treatment method of epidermal rupture:

1. Pull out the watch handle and let the watch stop.

2. How to deal with the crackage of the watch? You must not dial the hands or adjust the calendar quickly.

3. The watch should be placed flat (preferably with the watch mask facing down), and the watch should be placed flat until it is sent to the watch repair shop.

4. Do not do violent vibration and shaking during this period.

5. Instruct the watch repair shop to be careful not to let the glass chips hurt the dial and watch hands during disassembly and repair.

There are many Carl F. Bucherer watch repair points, and here are a few:

1. Carl F. Bucherer Watch Beijing Service Center, contact**: 400-682-5515. Maintenance address: Room 807, 8th Floor, Block W3, Oriental Plaza, No. 1 East Chang'an Street, Dongcheng District, Beijing.

2. Shanghai Service Center, contact**: 400-682-5515. Maintenance address: Room 918, 9th Floor, Shanghai Landmark Plaza, No. 409 Nanjing East Road, Huangpu District, Shanghai (Metro East Nanjing Road Station).

The places where there are Carl F. Bucherer watch repair points are: Shanghai, Beijing, Guangzhou, Jinan, Qingdao, etc.

1. Shanghai. <>

2. Beijing. <>

3. Guangzhou. <>

4. Jinan. Jinan Carl F. C. Chercher Watch Repair Service Center, maintenance address: 9th Floor, Greenland Center Office Building, No. 25 Gongqingtuan Road, Shizhong District, Jinan City (Room 907), customer service telephone Yuanchun: 4008299059.

5. Qingdao. Qingdao Carl F. Bucherer Watch Repair Service Center, maintenance address: Room 04, 22nd Floor, Block B, China Resources Building, No. 6 Shandong Middle Road, Shinan District, Qingdao (near China Resources Mixc), customer service**: 4008299059.

The above content reference: Carl F. Bucherer Watch After-sales Service Center - Home.

Carl F. Bucherer Watch After-Sales Center: 400-659-0877

I believe everyone is familiar with Carl F. Bucherer's watches, Carl F. Bucherer is a well-known Swiss high-end watch brand, and owning a Carl F. Bucherer watch can be said to be a status symbol. But many people don't know how to take care of it after owning it, which will have a great impact on the daily use of the watch. Therefore, everyone should learn how to deal with the common faults of the watch and the relevant knowledge of maintaining the watch.

Here's how to adjust the time of Carl F. Bucherer watches.

1. The handle in the middle is screwed like a screw, according to the waterproof design of the counter, and when adjusting the time, it is screwed downwards counterclockwise, and it is loosened like a teacup lid.

2. After unscrewing, it is screwed directly upwards at 0 gear, and it is manually wound. If you don't wear it for a long time, you need to wind it up 30 times.

3. Pull it lightly, it is 1 gear to twist up to adjust the week, and down to adjust the calendar. In the pull of the 2nd gear, adjust the week.

Hello, Breguet watch repair: Qianjiang Road, Jianggan District. It is located at B-2606, China Resources Building, The Mixc.

If you choose a general watch cleaning tool, the general hand tool includes a watch brush and a special cleaning solution for the watch. It is very simple to use ordinary tools for cleaning, and the cleaning fluid used is 120 jet gasoline. Since there is a certain amount of impurities in gasoline, it is best to filter No. 120 gasoline with filter paper to remove impurities.

Otherwise, parts cleaned with unfiltered gasoline will have a layer of hoarfrost on the surface. Cleaned parts must be blown or tumble dried. If there is a lot of sludge or too dirty in the core parts, it should be soaked in the cylinder for a while.

If necessary, use a brush to remove dirt from the table or a willow stick to remove the sludge, and then put it in clean gasoline to clean it. In short, the core parts should be cleaned clean and clean, and no negligence should be made.

1. Carl F. Bucherer watch maintenance: waterproof.

Over time, the water-resistance of a watch may be reduced by deterioration of the gaskets or accidental (mechanical) impact of water-resistant parts such as the crown, pushers or crystal. Please note: Do not operate the crown or pushers in water or when the watch is wet.

According to the care instructions, we recommend that you have your watch checked for its water-resistance once a year at a Carl F. Bucherer Certified Service Center. Always rinse your watch with clean water after submerging it in seawater, as this will prevent salt residues from damaging or affecting your watch or any of its properties.

2. Carl F. Bucherer watch maintenance: cleaning.

Use a soft brush and mild soapy water to carefully clean the metal band and water-resistant case. Use a soft cloth to dry your watch.

3. Carl F. Bucherer watch maintenance: collision.

Protect your watch from collisions and exposure to extreme temperatures.

4. Carl F. Bucherer watch maintenance: magnetic field.

Avoid placing your watch near speakers, refrigerators or any other electronic devices that generate magnetic fields, as they may affect the accuracy of your watch.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

Daily maintenance of the watch:

1. Do not put the watch on the stereo or TV to prevent magnetization.

2. Do not put the watch in the wardrobe with mothballs to prevent the watch oil from deteriorating.

3. Do not touch the watch with corrosive substances, especially acidic substances, which will corrode the case.

If you want to take care of your watch, you can click on my homepage to consult, I hope it can help you. It is not difficult to take care of your watch on a daily basis, as long as you can do these things on a regular basis, you can trust that your watch can always be kept in the best working condition.

1. The metal material of Carl F. Bucherer watches is easily magnetized, so you should try to avoid placing your Carl F. Bucherer watch next to magnetic objects, such as mobile phones, computers, magnets, door handles, automatic mahjong machines, etc. Once the Carl F. Bucherer watch is magnetized, it will cause inaccurate time, it is recommended that you immediately go to the watch repair shop for demagnetization treatment.

2. Carl F. Bucherer watches can easily cause damage to the movement, scratches to the case and glass. It is recommended that when wearing a Carl F. Bucherer watch, try to avoid bumps on the Carl F. Bucherer watch.

3. During the wearing of Carl Bucherer watches, you should avoid soaking in water or direct contact with water for a long time, and you should not wear Carl F. Bucherer watches to take hot baths and showers. If your Carl F. Bucherer watch accidentally gets wet, dry it in time, otherwise the water will easily corrode the Carl F. Bucherer watch case.

4. Carl F. Bucherer watches should be maintained regularly, and once a problem is found when using Carl F. Bucherer watches, the watch should be immediately sent to a professional watch repair shop for inspection and repair. Carl F. Bucherer watch movement should be regularly washed to avoid sludge drying up, resulting in inaccurate time, it is recommended that you oil the Carl F. Bucherer watch movement every two or three years to ensure the lubricity of the movement.

The watch stops secretly.

Lack of power. An automatic watch uses the movement of the arm to complete the winding. If the watch is left for too long or the amount of arm movement is less every day, the mainspring energy of the watch will be due to insufficient winding, and it is easy to produce inaccurate timing or night stopping.

Short when worn. If the above phenomenon occurs, you need to increase the amount of arm activity or take off the watch before the evening break, and shake it horizontally for about 2 minutes, if you want to walk longer, you can shake it for 4 minutes. (If the watch has a hand-winding function, it is recommended to manually wind it in a clockwise direction) and it is recommended that you wear it for at least 6 to 8 hours a day to ensure that you have enough energy. It will not cause the mechanical watch to stop.

Hairspring failure. If it's not the reason mentioned above, it may be that there is a problem with the hairspring. The amount of exercise is large, and the clockwork will be tighter. If there is a problem with the upper bar mechanism that causes insufficient power, it generally appears between 9 o'clock and 12 o'clock in the evening, "with a calendar function table" because at this time the hour wheel begins to drive the calendar wheel, and the load is large, if the power is insufficient, it is easy to stop during this time period.

This time should not be reversed dial pin, now many mechanical watches use plastic parts of the calendar wheel, accidentally will break the gear, once the tooth is broken, every day at this time will be stuck, or to a fixed date will no longer jump. As a result, the mechanical watch was stopped.

Bump failure. The watch is a precision instrument, once the collision receives a violent vibration, then the movement parts may fall off or be damaged, so that the watch can be stopped.

Reason for watch stealing:

1. If the watch is placed for too long or the daily arm activity does not meet the requirements of the watch winding, the watch will cause the mainspring to be insufficient due to winding, which will cause the watch to be unstable or stop when not worn at night.

2. Accidentally knocking or falling on the watch in daily use will also lead to the theft of the mechanical watch.

3. The failure of the hairspring is also one of the reasons for the stealing of the mechanical watch when it is running normally.

If the amount of activity is low, the automatic watch may stop or walk slowly, which is a normal phenomenon.

When using it for the first time, please rotate the handle 20-30 times to make the initial winding of the mainspringFor automatic watches, when the mainspring is full, the watch has high accuracy, if the watch stops, if you want to completely rely on automatic winding, it is generally difficult to make the watch full winding. In this way, the watch is always in a half-chord state, and the amount of activity you do each day (the amount of winding) can only compensate for the amount of time released when the watch springs run.

In addition, the watch is dirty, the lubricating oil is deteriorated, or the new watch has hairy teeth, stealing to stop, most of them are escapement system failures, it is recommended to go to the after-sales department to replace or find professionals to repair.

There are many reasons for the watch to stop secretly, but in addition to malfunctions, there are also problems with wearing habits that lead to insufficient power and stop-and-go. There are also yes, first of all, make sure that you have enough time to wear it every day, see if this situation will happen, and don't take it off and put it on the table as soon as you get to the office or when you get home.

If you ensure at least 7-8 hours of wearing time every day, there will still be a sneak stop, then it may be because the watch needs to be washed, of course, the watch you just bought generally does not say that you need to maintain the oil immediately, but it is possible that the watch you bought is in the counter for a long time, and some of the watches that are pressed in stock may be placed in the counter for a long time, if the counter has not been sold, put the watch for several years, because the internal lubricating oil is naturally aging, it is also necessary to wash the oil, Of course, this situation is very rare, because after all, it will not go away if you put it there, but it will not age so quickly if you put the lubricating oil.