Omega mechanical watches, no matter how the date turns, it doesn t matter

Mechanical watch date adjustment method:

1: The innermost upspin is the upper spring, the downspin is neutral, and some of the upper and lower spins are neutral, which completely depends on the rotor to work.

2: Pull out a gear, the top spin is to adjust the date, and the bottom spin is to adjust the day.

3: Some are upspin to adjust the date, downspin is neutral, at this time must be clockwise 24 hours to adjust the day of the week, and then adjust the date after the week is adjusted. (The day of the week will be normal after adjustment, because the day of the week is continuous, and the watch must have a dial date because the calendar has the 30th, 31st, and even February has only 28 days).

5: Day-calendar jumping, due to the different frames, it is divided into two kinds of fast and slow, the first is completed within 5 minutes, and the second is completed within 3 hours.

6: Avoid stripping the calendar between 9 pm and 4 pm, because the night is the time period when the calendar system is running, and manual adjustment is easy to cause damage to parts.

7: It is recommended to send it to the brand after-sales service or regular maintenance service center for testing and maintenance.

Hello landlord, you try to lower the time, turn 12 hours, if the calendar will not jump, that is, the calendar is broken, there is a problem, take it to buy a place to repair it, the normal repair calendar is about 30-50 yuan.

It is recommended to send it to the after-sales service center for testing and repair.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

Reason for stopping:

The more common reason may be the lack of kinetic energy, automatic mechanical watches do not need to be manually wound, but to keep the mechanical watch on the hand to wear at least 8 hours of time, because the automatic mechanical watch uses the arbitrary swing of the rotor to wind up, and the rotor swings with the movement of the arm, so if the mechanical watch needs to be worn on the hand often.

But if you often wear it on your hand and don't walk, it may also be a lack of kinetic energy, and then we need to manually wind it.

See if it's a problem with your own debugging, the watch is a 24-hour system, that is, the hour hand has to turn two major turns of the calendar to jump for a day, try to adjust the time and the calendar in the morning. If it is not a problem of debugging, then there is a problem with the movement, and it is necessary to find after-sales treatment.

The watch is underpowered and stops.

The watch is powered by a movement. The power reserve is insufficient, the original manual foot chain, two or three days after wearing, there will be a stealing stop phenomenon due to insufficient power, the owner thought that it was caused by no oil washing; After washing the oil in the local watch repair shop last month, the fault is still the same, and the watch day error is 16 seconds.

For such a delicate instrument as a watch, it is better to choose a more formal watch repair center for maintenance to avoid being deceived.

Precautions for buying a watch:

Many people buy watches because they like watches, some people need to work, some people are for decency, no matter what the reason, if you buy a watch for your own use, then it is recommended to know more about watches, so as not to be confused on the road to buying watches. Of course, you can go to any counter, see a watch you like, accept it, buy it, then it's just a tool for you to see the time.

There will be a lot of fun to learn about the watch itself, from the history of the brand, the functions of the model, the design features of the collection, etc., which will make you understand the true value and beauty of this watch. A good watch has never been cheap, learn more, it is beneficial and harmless, and there is still a long way to love watches in the future.

1. Insufficient activity energy, resulting in insufficient kinetic energy: for automatic mechanical watches, if you wear them normally for 8 hours a day, the normal amount of exercise can support the time, generally speaking, the watch can walk normally for 36 hours, if you don't wear it often, or the duration of wearing it is not long, that is the reason for the lack of energy, if there is enough energy every day to support the rotation of the watch and there is a big deviation, you need to go to a special institution to check what the situation is. 2. The watch is magnetized:

Generally, when the watch is close to the magnetic field, such as placing it next to a speaker or computer at home, it is easy to disturb the normal walking of the hands, resulting in slow walking or stopping walking. If your watch is getting slower and slower within a year of buying it, it may be that the watch has come into contact with magnetic items, you can go to the repair center to demagnetize, and then please avoid the contact between the watch and the magnetic items. 3. The oil of the movement is dry

If you wear it for a long time, it may be that the oil in the watch movement is dry, the rotational friction resistance of each part becomes larger, and the watch will slow down, and you have to oil the movement, otherwise it will cause the parts to be worn out for a long time.

Questions. Omega quartz watch, when adjusted by hand, sometimes turn straight, what is the reason why the minute hand does not move.

It could be one of the above scenarios.

You can go to the shop and have it repaired.

Hello dear dear Hello dear Hello Dear Dear Hello De If the date of your Omega watch does not move, it may be due to the following reasons:1

The watch is not fully unplugged from the first gear (i.e., the time adjustment setting): Before adjusting the date, the watch needs to be fully unplugged from the first setting. If the watch is not fully unplugged from the first gear, the date cannot be adjusted successfully.

2.Date Quick Adjustment Disabled: Some OMEGA watches will have a quick date adjustment function, but this function can only be used under certain conditions.

If your watch's Quick Adjust feature is disabled, you won't be able to adjust the date in this way. 3.Faulty watch movement:

If neither of the above is the problem, then there may be a malfunction in the watch movement. At this time, it is necessary to send the watch to a professional repair point to go to the wild bank for repair and repair. In short, if the date of your Omega Jane watch does not move, it is recommended that you first check whether you have completely unplugged the first gear and try to use the quick adjustment function.

If you still can't solve the problem, you need to seek professional help. I hope my answer helps you<>

Hello dear and happy to answer for you. The reason why the Omega watch calendar does not change the date at zero is as follows: 1

It is not possible to adjust the date between 21:00 and 3:00 am, as this can cause damage to the watch.

If the time is adjusted at this time, it will destroy the operation of the watch itself, because this time period is the date working time, and if you manually adjust the date during this time period, the parts of the date transmission system may be damaged. The calendar jumps gear-driven, and generally beats more slowly. 2.

Omega's mechanical watches and quartz watches have different jumps for the day and date. The date and day of the week in quartz watches are jumped at zero o'clock (i.e. 12 p.m.). This level of accuracy is only available in electronic watches.

Mechanical watches are not as accurate and may be advanced or delayed because the date and day of the week are pushed by one wheel. The above is all my reply, I hope it can help you, I wish you a happy life

The date of the Omega watch does not change the preparation, it may be the wrong method, you should adjust the day of the week and then adjust the date, the top rotation is to adjust the date, and the bottom rotation is to adjust the day. Adjust the method.

1. Adjust the calendar.

The innermost upspin is the upper clockwork, the downspin is neutral, some of the up-and-down spin are destroyed by the neutral gear, completely relying on the rotor to work, pull out a gear, the upspin is to adjust the date, and the downspin is to adjust the week;

2. Adjust the week first.

Some are upspin to adjust the wax to adjust the date, downspin for the neutral, at this time must be clockwise 24 hours to adjust the day of the week, and then adjust the date after the week is adjusted;

3. Skip frame for the day of the week.

The reverse winding causes damage to the calendar dial and other related internal parts, and the day-date jumps are divided into two kinds of fast and slow due to the different grids, the first is completed within 5 minutes, and the second is completed within 3 hours.

Avoid adjusting the calendar at night:

Avoid adjusting the calendar between 9 and 4 o'clock in the evening, because the evening is the time period when the calendar system is running, and manual adjustment is easy to cause damage to parts, so it is recommended to send it to the brand after-sales service or regular maintenance service center for testing and maintenance. <>

Summary. Dear, if your Omega mechanical watch calendar doesn't jump, there could be a few reasons:1

Movement failure: The gears and gearing inside the movement may have malfunctioned or worn out, causing the calendar to not jump or jump abnormally. In this case, the watch needs to be sent to a professional service center for repair or to have the movement replaced.

2.Improper adjustment of the calendar mechanism: If the calendar organization is not adjusted properly, it can also cause the calendar to not jump or jump abnormally.

You can try adjusting the crown or adjusting the date mechanism as described in the manual. 3.Calendar agency stuck:

Sometimes the gears or other parts inside the calendar mechanism will get stuck, causing the calendar to not jump or jump abnormally. In this case, the watch needs to be sent to a professional repair center for overhaul and cleaning.

Dear, if your Omega mechanical watch calendar doesn't jump, there could be a few reasons:1Movement failure:

The gears and gearing inside the movement may have malfunctioned or worn out, causing the calendar to not jump or jump abnormally. In this case, the keykey needs to be sent to a professional repair center for repair or to have the movement replaced. 2.

Improper adjustment of the calendar mechanism: If the calendar mechanism is not adjusted properly, it may also cause the calendar to not jump or beat abnormally. You can try adjusting the crown or adjusting the date mechanism as described in the manual.

3.Calendar mechanism stuck: Sometimes the gear or other parts inside the calendar mechanism can get stuck, causing the calendar to not jump or jump abnormally.

In this case, the watch needs to be sent to a professional repair center for overhaul and cleaning.

Dear, in short, if your Omega mechanical watch calendar does not jump, it is recommended that you do not disassemble or repair it yourself, so as not to cause more damage. It is best to take your watch to an official OMEGA workshop or an approved repair center for service and repair.

My watch has to manually adjust the date every day.

Dear, if you rent a mechanical watch that needs to manually adjust the date every day, there may be several possible reasons: Your watch movement is not a self-winding movement: some movements do not have an automatic winding function, and you need to manually rotate the crown to power the movement, otherwise the movement will not function properly, resulting in an incorrect date display.

Lack of power in the movement of your watch: Even if the self-winding movement, such as Sun Liangguo's daily wear is insufficient, or the wearing time is too short, the movement is not powered, and the date will not jump or not jump completely. Your watch calendar mechanism is malfunctioning:

If your mechanical watch has been in use for some time, the calendar mechanism may malfunction or wear out, causing the date to be displayed incorrectly. This situation requires the watch to be sent to a professional repair center for overhaul or to replace the calendar mechanism.

If your mechanical watch needs to be manually adjusted every day, it is recommended that you take your watch to a professional repair center for overhaul. The maintenance personnel can judge the specific cause of the problem through the movement and calendar mechanism of the checklist, and provide the corresponding solution to the problem.

Reasons why mechanical watches don't go:

There are many reasons why the mechanical watch does not go, such as: there are bumps, the movement gears are misaligned, the watch is magnetized, the oil sludge is dried for a long time, etc., which will cause the mechanical watch not to go.

Recommendations for the use of mechanical watches:

1.A watch with a hand-wound movement should be wound at the same time every day as far as possible so that the watch has sufficient energy to operate in the next 24 hours.

2.The energy of a watch with a self-winding movement is the movement of the wearer's arm, so it does not need to be wound manually under normal wear, only when the wearer's movement is not enough to replenish enough energy to the mainspring, the manual winding method can be used to compensate, and the crown rotation is controlled within 20 revolutions when winding.

3.If a self-winding watch has not been worn for more than 40 hours, the movement should be reactivated by turning the crown twenty times when it is worn again.

4.To prevent moisture from penetrating the case and to maintain the water-resistance of the watch, make sure that the crown is locked at all times.