What to do if the iPhone6 fingerprint button is broken

Go to an Apple after-sales repair point for repair.

1. Fingerprint unlocking.

Fingerprint Unlock is a screensaver unlock software that uses your fingerprint data and records for verification. The first time you use it, the program will be right.

Sample your finger data for entry; When the screensaver is on, you can simply place your finger in the scanning area and wait for a short scan.

Compare, and after the match, you can easily untie your phone. In addition to unlocking with your fingerprint, you can also set up gestures or nine palaces.

dot matrix to unlock.

2. Application introduction.

For the first time, the program will sample and enter finger data; When the screensaver is on, simply scan by placing your finger on it.

Use gestures or the Nine Houses dot matrix to unlock it.

The workaround is as follows;

Connect iTunes, turn off your iPhone, press and hold the Home button and the Power Off button at the same time for 10 seconds, release the Power Off button, continue to press and hold the Home button until you see the device recognized in DFU state on the computer, after the computer prompts, release the Home button, select the recovery option button on iTunes, and click Confirm Recovery in the pop-up selection box.

3.Next, iTunes will pop up a page prompting that everything will be erased, and it will also be with.

Apple server verification recovery, when the verification and extraction of files are completed, iTunes will automatically reinstall the best firmware version for the iPhone, wait for the installation to be successful, and then reinsert the mobile phone card to activate the iPhone online.

iPhone6 Home button pressing failure, you can try to restore the phone to factory settings to solve the problem, the specific process is as follows:

1. Take iPhone 6 as an example, light up the phone screen, find the "Settings" function option on the desktop, and click to enter the next step.

2. In the settings interface, find the "General" option and click to enter the next step.

3. In the general interface, find the "Restore" option and click to enter the next step.

4. On the restore interface, find the "Reset All Settings" option and click to enter the next step.

5. Finally, click on the "Reset All Settings" option to restore your phone to factory settings.

If the above methods still fail to solve the problem of the mobile phone, you can bring the mobile phone, warranty card, etc. to the local Apple after-sales service center for testing and processing.

1. Open the settings interface of the phone, observe carefully, find the icon of touch ID and password, and click it with your finger.

2. The interface jumps, and we enter the password.

3. After entering the correct password, the interface jumps, and we click on the fingerprint to guess the finger 1.

4. Enter the interface, click the red icon below to delete the fingerprint.

5. Return to the interface just now, click Add Fingerprint, put your finger on the small dot, and the system will recognize it.

6. After the recognition is completed, add a new fingerprint.

1. It may not be a problem with the key, but a problem with dust or static electricity entering the home button.

First of all, we lock the screen or shut down, preferably directly.

Then, then gently flick the home button with your finger.

After a while, white dirt may appear, and then it will be repeated until it is normal.

2. The home button needs to be reset.

Then, press and hold the power button until the slide to power off button appears, at this time, instead of sliding to power off, just press and hold the home button for a few seconds until you return to the springboard, so that the home button is reset.

3. Clean and wipe.

Have medical alcohol ready.

Cotton balls, tweezers.

The iPhone is at a 45-degree angle to the ground, with the Home button down and the earpiece on top.

Use tweezers to take an alcohol cotton ball and press it on the home button, press the alcohol cotton firmly with the tweezers clamp, let the alcohol seep out, and wipe it back and forth along the edge of the home button.

Repeat this until the alcohol evaporates.

4. External power supply test.

Charge your phone, then keep holding down the Home button until Siri appears, then let go.

Unplug the power supply and test the results.

5. Flash, if these methods don't work, then you can only flash the computer, link the computer, back up your own things, and then re-upgrade the firmware, wait for the firmware upgrade to be completed, and test.

6. If none of the above methods work, then only send it for repair. During the warranty period, you can send the fruit officially, if it is not within the warranty period, you can choose a repairer.

The home button of iphone6 is just a mobile phone accessory, not connected to the internal motherboard of the mobile phone, so the home button is also associated with fingerprint unlocking, even if the home button fails, you can use fingerprint unlocking.

That's fingerprints.

zhi1、 When setting the fingerprint to unlock the DAO, the fingerprint is not completely put on the answer home button, it is recommended to reset the fingerprint, the finger is close to the home button When unlocking, the finger and the home button are not tightly attached, pay attention to the finger to stick to the home button There is water on the finger, resulting in the inability to recognize the fingerprint, pay attention to keep the finger dry.

3. Connect the iPhone with an external power supply, press and hold the home button until the voice interface appears, remove the external power supply, and the home button will be revived immediately, as sensitive as the one you just bought.

That's because the fingerprint reader on your home button isn't broken yet.

You can also continue to use it.

The home button belongs to the hardware class, and the recognizer belongs to the software class.

You can turn on Bai to start [AssistiveTouch] instead of the DuHome button.

Here's how to do it: 1. Find the settings zhi icon in the main interface.

2. Click DAO to enter the settings interface.

3. Then scroll down to find [General]. Right.

4. Then select [Accessibility] and you can see [AssistiveTouch].

5. The button will be displayed on the screen after selecting On.

6. Click the button, and then select [Home Screen] to return to the main interface.

7. If it is troublesome, you can go to the local Apple after-sales service for repair and replacement.

It is recommended that you go to the after-sales service to repair.

Mobile phones like yours have a good after-sales service.

1. Open Settings on the iPhone Home Screen.

2.In the settings list, click the [Touch ID & Passcode] field.

3.Once you've gone to Touch ID & Passcode, enter your passcode.

Unlock is off, tap Add Fingerprint.

5.Follow the instructions to place your finger on the home.

6.You will see an animation on the screen that will record your fingerprint, accompanied by vibrations to indicate that your fingerprint is being read.

7.When you are prompted to "Adjust Holding Posture" when you enter your fingerprint, click Continue. Move your finger repeatedly to take fingerprints on the edge of your fingers.

8.Repeated fingerprint reading is done.

9.When the fingerprint is set on the iPhone6S, you can see the fingerprint1 and can use the fingerprint to unlock it.

iPhone6 fingerprint recognition does not work reason:

1.Wet fingers or mobile phones, and the ambient temperature is too low.

The Touch ID sensor uses static electricity and heat from your finger to achieve recognition, so if your finger or home button is stained with water or too wet, it will also cause recognition failure, so make sure your finger and phone are dry. In addition, a colder environment can also affect the operation of the sensor.

2.The phone restarts.

For security reasons, fingerprint unlocking cannot be done every time the phone is restarted, and you need to use a passcode to unlock it before you can use the Touch ID function again.

3.There is a stain on the sensor.

If the home button is stained, it also has a great impact on fingerprint recognition, of course, we can't guarantee that the fingers are in a very clean state at all times, at this time you only need to wipe the home button with a clean cloth, and the general fingerprint recognition will immediately "resurrect with full blood".

Cancel him with a password,,, it's all broken, and what else can he set up?

Go to the mobile phone store to see, do you solve the problem by changing the home button? Or maybe it's you, the fingerprint cable is broken.

Have you solved this problem, can you tell me about it, I also encountered the problem of consent.

Reasons for fingerprint unlocking failure: 1. There is a problem with the fingerprint input, which causes the fingerprint to be inconsistent with the fingerprint stored in the A7 chip, resulting in unlocking failure. 1. There is a problem with the home button and related parts of the iPhone6 Plus, and the fingerprint cannot be scanned correctly.

2. Fingers with sweat or powder, or oily fingers. Leads to sweeping.