-
Hello landlord,If it's a desktop, you don't need a wireless network card,Notebooks generally come with their own,Maybe you set it wrong,In fact, you can use portable wifi plugged into the computer to do wireless network use,Recently, Tencent just released the national wifi,It can be plugged into the computer to automatically drive the creation of wifi,Up to 32 people can share wifi to access the Internet,There are unique and advanced mobile phones and tablets equipped with a new version of QQ,WeChat can be connected to the whole people with a sweep,Anti-rubbing network interception Trojan horse, etc., Mobile Tencent game gift pack props and other privileges, online game acceleration 72 reduce card shield, cross-network acceleration, etc., the national wifi is simple to use, and now many people like this artifact.
-
Your connected device may not support built-in Wi-Fi and requires an external connection. Thank you.
-
There may be some reasons why your wireless router has no signal:
If the wireless network and modem or external network cable fail, the network cable is loose, resulting in the external network network cable can not pass through the wireless router normally, thereby affecting the wireless network no signal, and the network cable connection of each device can be re-plugged by the wireless router modem external network cable;
If the wireless router modem is not working, check whether it is working and energized, if not, plug in the power supply cable of the device again;
Skip the wireless router and directly connect the modem to the computer broadband dial-up Internet, if the broadband dial-up is normally available, it is recommended to restore the wireless router to factory settings, re-set the Internet access parameters, and create a new wireless network;
If the modem cannot access the Internet with broadband dial-up, the fault may be caused by the modem or the external network. Disconnect the power to the modem for a few minutes before restarting, if the fault persists, call the local network operator to repair the network fault.
-
Dear users, hello:
For your question, it is recommended that you check:
1. Whether the WLAN on the wireless cat is bright, there is a WLAN button behind the wireless cat, which can control the turn of the wireless signal off and on.
2. Enter the wireless modem settings to check whether the wireless broadcast is turned off.
3. The restore hole behind the wireless cat can restore the factory settings of the cat, you can try it.
4. None of the above operations work, it is recommended that you call 10000 for repair.
Anhui Telecom will serve you wholeheartedly, our network hall is holding Tianyi mobile phone carnival activities, mobile phones are cheap in the whole network, during the event to buy mobile phones to send traffic, send phone bills, and participate in the lottery activities; At the same time, pay 100 and get 2 yuan free in the network hall, and you can also participate in the ** activity of smartphones and phone bills, welcome to check.
If you have any other questions, please come to the platform or Anhui Telecom's online business hall for consultation;
-
There is a "broadcast cancellation" in the wireless settings, how do you tick it? Ticking means that the name of the wireless network you set will not be broadcast, and the wifi terminal such as computers and mobile phones will not be able to find your wireless network, so you can only set the configuration file to let the terminal connect to the wireless network specified in the configuration file. The advantage of this method is that your wireless network name is not exposed to being connected by illegal intruders.
Try unchecking the box in front of "Broadcast Cancel".
-
Hello: It is recommended that you restart the cat and try again, if it still doesn't work, press and hold the recovery button for 5 seconds to recover.
-
Dear Telecom Broadband Users, log in with your account and password and open the network - broadband settings.
Establish a new connection, carry the service Internet (enabled), the mode route (PPPoe), use NAT, enter your account and password to access the Internet, and confirm.
Hope it helps you and have a great day!
Equipped with broadband, Internet room! Guangdong Telecom's online business hall is equipped with telecom broadband, faster, easier and more economical! 4M pure telecom broadband, no fixed line and mobile phone, one household and one line, no peak pressure on network speed, please click for details.
-
Hello, Wireless Cat is a wireless router, when you use a computer (desktop), you need to connect a network cable, not when you use a mobile phone and a laptop. When using a computer (desktop), you need to purchase a wireless router cable (usually equipped).
-
Wireless cats cannot use smartphones to access the Internet directly.
You need to add a router to connect to the Internet after setting up the modem.
-
There are two ways to use the wireless routing function to make the mobile phone wireless Internet access
1. Crack the wireless cat and realize the wireless routing function.
The wireless cat is customized by telecommunications, and the wireless routing function is limited, and the wireless routing function can only be realized after cracking, so that mobile phones, laptops, and pads can access the Internet wirelessly. At the same time, the desktop computer has wired Internet access (no dial-up, direct Internet access).
There are many cracking tutorials on the Internet, and the cracking of wireless cats is different for each model. You search for the model of your wireless modem, find the tutorial, and check the settings.
Second, it can also be connected to a wireless router to achieve wifi Internet access.
You can also buy a wireless router and follow the following method to set up wireless Internet access:
1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;
2. Enter the gateway address of the router (on the label behind the router) in the address bar of the browser, and enter the login username and password to enter the settings page;
3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;
4. Set the SSID, encryption method and password;
5. Save and restart;
6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.
1. Connect through the network cable or wireless connection, enter the address in the address bar below, and the general initial address is; >>>More
Hello, it must be that your router has not been set up successfully, your broadband login has not been successful, and there is your computer room desktop, and you can also use portable wifi. Receive signals from your wireless route. Recently, one of the more popular ones on the Internet Tencent National WiFi feels more suitable for you to use. >>>More
You click on the computer** data, which occupies the traffic, of course the TV will be stuck, which is normal. The solution is to find out the IP addresses of your computer and TV. Then go to the router settings and make sure that the bandwidth value that the TV can use is OK. >>>More
There is no doubt that the problem should be approached in this way: >>>More
Home Network Environment Cabling:
1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer. >>>More