Can you scrub the LCD display with a damp cloth Why

It is recommended that you do not use it.

To use professional LCD cleaning products, no matter what kind of detergent can not be sprayed directly on the screen, because the LCD screen is most afraid of water or liquid seeping in, if that is the case, the LCD screen will be scrapped.

And don't use alcohol, if the cleaning liquid is smelly, it can't be used, the smell is generally added with other additives, maybe the stain removal effect is good, but that is at the cost of damaging your LCD screen!

And don't believe what some people say to wipe with a soft cloth, be sure to use a professional LCD cleaning cloth, it is best to use the necessary wiping cloth in the LCD production process - ultra-microfiber wiping cloth to wipe, if you have done it in the LCD factory, you will know what this is, and you will know the value of this cloth. Don't use the kind of cloth that sheds or the so-called terry cloth from the big international manufacturers, if you look under the light microscope you will know why.

To sum up, don't use that kind of water-based liquid to clean the LCD screen, you can use a glue with poor fluidity, and it's very troublesome to clean My LCD film is attached to a film on the monitor frame Cleaning just wipe the film My film is to buy a computer is glued to the LCD You can buy one.

The screen of the LCD monitor is dirty, first of all, we can use a special cleaner, but it is expensive, a bottle of brand-name screen cleaner is more than 100 yuan, I believe that not everyone is willing to buy a use.

Since most people are reluctant to buy special cleaners, we also have a magic weapon: soft cloth + water. If there is only some dust on the LCD screen, it is much easier to clean, just a slightly damp soft cotton cloth to gently wipe off the dust; If the screen is too dirty, wipe it slowly and patiently, and do not use rough or synthetic fabrics, as the fabric can damage the protective layer of the screen.

It should be noted here that the soft cloth must be wrung out before wiping, so as not to let too much water vapor enter the inside of the LCD display, and a simple moisture-proof treatment can be carried out after wiping. Also, avoid using general detergents and organic solvents such as alcohol, which can corrode the surface of the display.

Yes, but the cloth used should not be too warm, and the slight temperature will be fine, but with such a cloth, this will affect the life of the LCD screen. If you wipe the screen, it is best to use a professional LCD cleaning product.

Liquid crystal display, commonly known as LCD (liquid crystal display) in English, is a kind of flat panel display. It is used for screen display of TVs and computers.

No, because this will cause water to enter the LCD screen, which will affect the life of the display.

With professional LCD cleaning products, no matter what kind of detergent can not be sprayed directly on the screen, because the LCD screen is most afraid of water or liquid seeping in, if so, the LCD screen will be scrapped. If there is only some dust on the LCD screen, it is much easier to clean, just a slightly damp soft cotton cloth to gently wipe off the dust; If the screen is too dirty, wipe it slowly and patiently, and do not use rough or synthetic fabrics, as the fabric can damage the protective layer of the screen. Be sure to wring out the soft cloth before wiping, don't let too much moisture enter the inside of the LCD monitor, and carry out a simple moisture-proof treatment after wiping.

Do not use general cleaning agents and organic solvents such as alcohol, which can corrode the display.

The LCD computer screen cannot be wiped with a damp rag.

Methods and precautions for cleaning LCD computer screens:

1. Take a soft cloth stained with a little glass cleaner to carefully wipe off the stains, and pay attention to the light force when wiping, otherwise the monitor screen will be short-circuited and damaged;

2. Do not let the detergent flow into the interface between the screen and the screen frame during the wiping process, so as to avoid a short circuit and burn the display;

3. Do not use a hard towel to scrub the surface of the screen, so as not to wipe the surface of the screen and affect the display effect;

4. Clean the display screen regularly and quantitatively, frequent scrubbing is not right, too frequent wiping will also cause some adverse effects on the display screen;

5. If there are some oil stains that cannot be wiped off, you can use transparent glue to paste them on the screen, and then remove them, the places that have been pasted on the screen are very clean, and the oil stains are glued to the transparent glue.

The protection of the monitor should pay attention to the following points:

1. Prevent unstable current.

2. Prevent the interference of other electrical appliances on the display.

3. Wipe the screen of the monitor correctly when cleaning, do not spray the liquid directly on the screen, and wipe it with a soft cloth.

But for liquid crystal displays, due to their own characteristics, the service life is slightly lower than CRT, but as long as you follow some simple maintenance methods, you can use it for a longer time, the main methods are:

Avoid burning out the inside of the screen

CRT display can burn out because of long-term work, and the same is true for LCD, so it must be noted that if you don't use it, you must turn off the display or reduce the display brightness of the display, otherwise it will lead to internal burnout or aging for a long time, and this damage is permanent and irreparable once it occurs. In addition, if a fixed content is displayed continuously for a long time, it may cause some LCD pixels to overheat, which may cause internal burnout.

Pay attention to maintaining humidity

Generally, the humidity is kept between 30% and 80%, and the monitor can work normally, but once the indoor humidity is higher than 80%, condensation will occur inside the display. The internal power transformer and other coils are also prone to leakage when wet, and may even cause a short circuit in the wiring.

The high-voltage part of the display is very prone to discharge; The components in the machine are prone to rust and corrosion, and in severe cases, the circuit board will be short-circuited. Therefore, the LCD display must pay attention to moisture-proof, and the display that has not been used for a long time can be powered on regularly for a period of time, so that the heat generated by the display when it is working will drive out the moisture in the machine.