Bluetooth headset to binaural mode, how to adjust Bluetooth headset to binaural mode

We often need our Bluetooth headset in our life and office, but how do we turn on the binaural mode of the Bluetooth headset?

1.Binaural mode: The two earphones are used together, so we directly take out our two earphones and press and hold the touch area of one of the earphones, when the red and blue lights flash, it means that it is ready to connect.

2.Let's go directly to the basic settings interface of the phone, then swipe the screen up and down, find the menu item of other connection methods, and click to enter.

3.After entering the interface of other networks and connection methods, we select the Bluetooth button and click to enter the Bluetooth setting interface of the mobile phone.

4.Turn on the Bluetooth of our mobile phone, the mobile phone will automatically connect to one of the earphones, the earphones will prompt "Bluetooth device connected", and then will "drop" to indicate that your ears have been successfully interconnected.

Extended information: Bluetooth headset is the application of Bluetooth technology.

It allows users to use the headphones in a variety of ways without the need for wires. Since the advent of Bluetooth headsets, it has been a good tool for mobile business people to improve efficiency, and it has mono and stereo sound.

There are three types of true wireless, including HSP, HFP, and A2DP. Bluetooth technology isn't just used on computers, like mobile**, digital cameras, camcorders, printers, fax machines.

Many electronic devices, such as home appliances, can use Bluetooth technology to achieve wireless communication without having to drag a tail (connecting cable). With the popularization of Bluetooth technology, home decoration is no longer troubled by the wiring of electrical appliances; When using home appliances, you don't have to worry about a lot of remote controls, a mobile phone or a car key can do everything; When you are away from home, the company's work arrangement and the picture of your relatives at home can be obtained anytime and anywhere; There is no need to queue up for punching in and paying fees, passing near the payment point, and you can easily complete the wide application of Bluetooth technology without entering the door, which will make our lives extremely easy.

How to restore binaural mode of bluetooth headphones? This is a rise in knowledge.

If you want to switch from single-ear mode to binaural mode, the specific operation is as follows:

1. First of all, put the left earphone and the right earphone into the charging room at the same time.

2. When the indicator light on the earphones is on, press and hold the function keys of the left and right earphones at the same time for 10 seconds.

3. After the red light of the left and right earphones flashes twice, take out the earphones.

4. Finally, you can see the earphone indicator flashing, indicating that the binaural mode of the earphones has been restored.

Press and hold the left and right earphone function keys for 10 seconds, you can see the earphone indicator flashing, indicating that the binaural mode of the earphones has been restored.

In the case of single earbud use, take out the other earphone and automatically match the binaural mode. Naturally, you can also use the headphones separately, away from a certain distance, and the two devices can be used separately by connecting Bluetooth separately, it should be noted that if the distance is too close, the mode of using alone will be invalid.

Monaural mode toggle binaural mode:

Restore the earphones to factory settings, press and hold the function button at the same time as the 2 earphones are powered on, do not release after the power on indicator light is on, continue to press for about 10-20 seconds and then release (never let go in advance, it is very important).

Put the earbuds into the charging case and press the power of the charging case (both earphones can be picked up with red lights).

Turn on and press and hold for seconds, the light will be on (the earphone voice prompt "power on") will be released immediately, and you can search for N1 in the mobile phone and click the link. (N1 in the Monaural pairing mode that started the connection ignores this device first, if you can't tell which is N1 in Monaural mode, then both N1s ignore this device and search for N1 connection again).

Note: Do not press for too long when powered on, pressing for too long will enter the one-ear pairing mode.

Summary. Recovery method 1: Put the left and right earphones into the charging compartment at the same time. 2. When the indicator light on the earphones is on, press and hold the button of the left and right earphones at the same time for 10 seconds.

3. After the red light flashes twice on the left and right earphones, take out the earphones. 4. You can see the earphone indicator flashing, and the binaural mode of the earphone will be restored. 5. Open the Bluetooth interface of the mobile phone, search for the Bluetooth headset again, and pair and connect.

Recovery method 1: Put the left and right earphones into the charging compartment at the same time. 2. When the indicator light on the earphones is on, press and hold the button of the left and right earphones at the same time for 10 seconds. 3. Wait for the red light of the left and right earphones to flash twice, and Lao Ying will smile and take out the earphones.

4. You can see the earphone indicator flashing, and the binaural mode of the earphone will be restored. 5. Open the Bluetooth interface of the mobile phone, search for the Bluetooth headset again, and pair and connect. 6. After the connection is successful, the Bluetooth headset can be used in binaural mode.

To resume slippery mode, you can try to press and hold the "Power Switch" button and the "Volume +" button at the same time for 15 seconds. You can also try to do it: first turn on the earbuds and charge the earbuds for 5-10 seconds.

If the earbuds are charged while powered on, the earbuds will automatically power off and be forced to factory reset. Some headphones will have a hidden "reset" button, which can be pressed and held for 5-10 seconds.

Recovery method 31: Re-pairing. First of all, remove all earphone pairings in your phone's Bluetooth. Deletion method - turn on the phone - Settings - Bluetooth - long press the earphone that needs to be deleted - unpair.

Put the earbuds into the charging case, reopen the lid, and then select pairing in the pop-up window of the phone, and restore binaural mode after reconnection. 2. Recharge. When there is a binaural mode failure, it may be caused by the lack of power of the earphones, put the earphones back in the battery box, then wait for the power to be fully restored, and then connect with the mobile phone, and then you can achieve binaural mode.

3. Adjust the volume balance. Many people encounter the reason why the Bluetooth headset rings and does not ring, it is likely that the volume balance setting is touched by mistake, and the specific recovery method is as follows: Open the mobile phone to find the settings icon, and enter the Gaopai system to set up the menu to eliminate the Nianling.

In the settings options, find "General" and turn it on. Go to the general settings, find "Accessibility", and turn it on. In Accessibility, turn on "Adjust the volume balance of the left and right channels", and then move the volume adjustment to the middle position.

The above are a few ways to adjust the binaural mode of Bluetooth, I hope it can help you.

Summary. Pro: Bluetooth headphones to become dual-earphone mode need to be operated by the following:1

Make sure the Bluetooth headset has been successfully connected to your phone or other Bluetooth device. 2.Open the Bluetooth settings interface of your phone, find the connected Bluetooth headset, and tap the Bluetooth headset name to enter the details page.

3.In the details page, there will usually be an option for "Headphone Mode", click to enter. 4.

If dual-earphone mode is supported, you can switch the earphones to dual-earphone mode here. 5.Some Bluetooth headphones may require certain buttons to be pressed at the same time to achieve dual headset mode, and the specific method needs to refer to the instruction manual of the Bluetooth headset.

Pro: Bluetooth headphones to become dual-earphone mode need to be operated by the following:1Make sure the Bluetooth headset has been successfully connected to your phone or other Bluetooth device.

Traveler 2Open the Bluetooth settings interface of your phone, find the connected Bluetooth headset, and tap the Bluetooth headset name to enter the details page. 3.

In the details page, there is usually an option to "headphone mode" for Pamo Chun, click to enter. 4.If dual-earphone mode is supported, you can switch the earphones to dual-earphone mode here.

5.Some Bluetooth headsets may require pressing certain buttons to achieve dual headset mode, and the specific method needs to refer to the instruction manual of the Bluetooth headset.

It should be noted that not all Bluetooth digital envy potato pie headphones support dual earphone mode, if there is no option or the method is invalid, it may be because the Bluetooth headset potato does not support this function.