How to match Envision after replacing the tire pressure sensor?

After replacing the tire pressure sensor, it can be matched by the multi-function steering wheel.

1. First, press the one-button start button to start the vehicle. Otherwise, the vehicle cannot be operated.

2. After that, find the set button on the left side of the multi-function steering wheel and press it.

3. After that, click the checkmark button on the right side of the multi-function steering wheel to confirm the operation.

4. After the matching is successful, the tire pressure display on the central control dashboard is normal.

After replacing the tire pressure sensor, it can be matched by the multi-function steering wheel.

Take the Buick Envision 2019 Luxury Elite Edition as an example:

1. First start the Buick Envision 2019 Luxury Elite Edition and wait for the vehicle to be powered on.

2. After that, find the SET button on the left side of the Buick Envision 2019 Luxury Elite Multi-function Steering Wheel and press it.

3. After that, click the checkmark button on the right side of the Buick Envision 2019 Luxury Elite Multi-function Steering Wheel to confirm the operation.

4. After the matching was successful, the tire pressure display on the central control dashboard of the Buick Envision 2019 luxury elite version was normal.

Tyre pressure must be matched with a gauge and then you can see how to match it according to the steering prompts.

1. Replacement process:

Prepare a sensor first;

Find a tire shop, remove the faulty tire, separate the faulty sensor from the valve, and keep the valve;

Then remove the new sensor from the valve and attach it to the old valve.

Inflated, if the alarm symbol is still there, you may need to turn off the power off and power on the self-test again.

Second, the working principle of the sensor:

A sensor is an electronic device that can measure the acceleration force and convert the acceleration into an electrical signal, which is the force that acts on the object during the acceleration process, just like the gravitational force of the earth, that is, the gravitational force; The acceleration force can be a constant, such as g, or a variable. There are two types of accelerometers: one is the angular accelerometer, which is an improvement from the gyroscope (angular velocity sensor).

Ask a question, okay, thank you.

Hello, Buick car changed the tire pressure sensor, you must use special equipment and then match it with the car diagnostic computer.

Ask other computers as well, right?

Ok thanks.

Ask how much is this.

Ok thanks.

Ok thanks.

Ok thanks.

After replacing the tire pressure sensor, it can be matched by the multi-function steering wheel, and the operation method is as follows:

Find the SET button on the left side of the Buick Envision multifunction steering wheel and press it.

Click the checkmark button on the right side of the Buick Envision multi-function steering wheel to confirm the operation, the match is successful, and the tire pressure display on the Buick Envision central control instrument panel is normal.

Hello, you can match the tire pressure in the instrument, and then charge that tire according to the steering prompt, in turn, [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Drive about 5 kilometers and try to learn automatically, if it doesn't work until 4s, use the tire pressure reset instrument to reset [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Just do the lower tire pressure reset. I hope my answer line helps you, I wish you a happy life, and your encouragement is my motivation to serve you wholeheartedly. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

The Buick Envision tire pressure learning method is as follows:

1.Bring the vehicle to a steady stop and pull the handbrake, preferably with the engine turning. Of course, just electrification is fine.

2.Press the MENU on the turn signal lever and the button switches to the vehicle information bar. Turn the up and down selection buttons on the turn signal lever to find the tire pressure information bar.

Press and hold (long-press) the Set CLR function key on the head of the turn signal pole until "Tire pressure learning or not" is displayed, then select "Yes". After the selection is completed, the horn will sound twice to confirm the start of tire pressure learning. At this time, the left front turn signal is on.

3.The left front wheel must be carried out first, and the entire sequence (left front - right front - right rear - left rear) must be unscrewed the valve cap, and the small column in the valve core must be poked with a key stick or something, so that the air in the tire can be discharged. Until you hear a horn sound, and the turn signal on the current tire side goes out, and the right turn signal is on, you can release the valve and stop deflate.

4.At this time, the right turn signal is on, repeat the above method and continue to deflate the right front tire until the horn sounds, and the right turn signal goes out. Stop deflate.

5.At this time, the right turn signal is still on, indicating that the right rear wheel needs to be deflated, repeat the deflation method, and deflate the right rear wheel. Until the horn goes off and the right turn signal goes out.

6.At this time, the left turn signal has been lit, indicating that the left rear wheel needs to be deflated, repeat the deflation method, and deflate the left rear wheel. This time, the horn will sound twice in a row after learning the left rear wheel to indicate that the tire pressure has been learned.

7.The air pressure of each tire observed on the gauge. If the tire pressure is less than normal, it is necessary to replenish the tire pressure and keep it within the normal range.

The first step is to replenish the tires to the normal pressure range.

2. Start the vehicle.

3. Use the options button on the steering wheel to call up the "Tire Pressure" option in the car computer.

4. Press and hold the " " button on the right side of the steering wheel and wait for a few seconds to complete the reset.

Buick other models tire pressure light removal method.

1. Press the "Menu" button on the joystick.

2. Select "Vehicle Information Menu", then turn the adjustment knob on the lever and select "Tire Pressure".

3. Press and hold the "SET CLR" reset button for a few seconds to reset successfully.

Buick Envision Tire Changing Tutorial.

1. Make sure that the car is parked on a horizontal and solid road surface, and if you change the tires on the side of the road, you also need to place a triangle sign at a distance of more than 150 meters behind the vehicle. The nut of the tire is removed with a special tool, and the nut should be loosened diagonally when disassembled, otherwise it will cause uneven stress on the hub.

2. Find the support point of the vehicle chassis and place the jack. Then slowly raise the chassis until it reaches a safe height before removing the tires. Sometimes the tires fit tightly with the wheels, and kicking your feet can loosen the tires.

3. Place the new tires and fix a few nuts manually. Finally, when the nut is tightened with a tool, the same diagonal tightening method is used, and the nut tightening operation needs to be carried out when the wheel touches the ground.

Depending on the degree of tire wear, it is decided whether to replace the tires.

1. If the wheel is aged, it is mainly reflected in the tread pattern and sidewall.

2. The tread wear contact limit mark, or even lower than the mark.

3. Once the tire is bulging, it cannot be used continuously.

4. Refer to the size and depth of the damaged tire to determine whether the tire needs to be repaired or replaced directly.

5. It is not recommended to repair the wear of the sidewall, and it can be replaced directly.

6. If the number of repairs exceeds a certain number, the tire strength cannot ensure the safe driving of the vehicle at this time.

Summary. Hello, happy to answer your questions.

How to match Envision after replacing the tire pressure sensor.

Hello, happy to answer your questions.

This situation is the tire pressure failure indicator, the solution is to ensure that the tire pressure of the four wheels is up to the normal standard, go to your local 4S shop and let the master use a special computer to match the data between the tire pressure sensor and the tire pressure module can be solved.

I have special tools on my side.

of the original car. The original look at the detection accidentally rotten made a new one, how to match your tire pressure to hit the megapascal, and then run 50 kilometers to automatically reset it, and then you changed the sensor is the original accessory, right?

The model is right. That's right.

You run 50 kilometers and then try it with an automatic reset, is there a dedicated computer?

1. First press the one-button start button to start the vehicle, otherwise the vehicle cannot be operated; 2. After that, find the set button on the left side of the multi-function steering wheel and press it. 3. After that, click the checkmark button on the right side of the multi-function steering wheel to confirm the operation. 4. After the matching is successful, the tire pressure display on the central control dashboard is normal.

For the maintenance of automobile tires and the storage of new spare tires, the general air pressure can be adjusted to, and the tires need to be moved after a long storage time to avoid the deformation of the tire crown under pressure for a long time, resulting in the situation that it cannot be recovered. Regularly check the wear and tear of the tires, whether there are cracks, cuts or other damage to the tire tread and sidewall, and it is recommended to do a four-wheel alignment after driving 20,000 kilometers.

Check the tire pressure, Envision ( check the transaction price |Detailed explanation of the model) Tire pressure is too high or too low will have a certain impact on the vehicle, and too high or too low tire pressure will aggravate wear. If the tire pressure is too high, the elasticity of the tire decreases, the tire becomes stiff, and the damage to the suspension is greater; The air pressure is lower, the driving resistance increases, and the fuel consumption also rises.

Photo by Brother Choosing a Car) @2019