-
The total weight does not exceed 30 tons.
1) According to CCTV, the Ministry of Public Security and the Ministry of Communications recently issued the "Notice on Unified Management of Identification Standards for Oversized and Overloaded Vehicles to Avoid Repeated Penalties and Other Related Issues".
2) The transportation department pointed out that for the total weight of the body and cargo of the two-axle vehicle exceeding 20 tons, the total weight of the three-axle vehicle exceeding 30 tons, the total weight of the four-axle vehicle exceeding 40 tons, the total weight of the five-axle vehicle exceeding 50 tons, and the total weight of the vehicle and cargo of the six-axle and above vehicles exceeding 55 tons, it should be recognized as an oversized and overloaded vehicle and be corrected.
3) Before May 1 this year, the public security traffic management department shall temporarily detain the driver's license if the weight of the loaded goods exceeds the verified load weight of the driving license by more than 30% although the above five situations do not occur. Vehicles that have been penalized or unloaded on the same day and whose weight after unloading is the same as recorded on the relevant voucher shall not be penalized or unloaded repeatedly.
-
How much is the penalty for the three-axle car exceeding the limit ton.
-
Legal analysis: the weight limit for three-axle wagons is 25 tons, and the weight limit for three-axle car trains is 27 tons.
Legal basis: "Regulations on the Administration of Oversized Transport Vehicles Driving on Highways" Article 3 of the following circumstances is an overrun transport vehicle:
1) The total height of the vehicle and cargo is more than 4 meters from the ground;
2) The total width of the vehicle and cargo exceeds meters;
3) The total length of the vehicle and cargo exceeds meters;
4) Two-axle trucks, the total mass of which is more than 18,000 kg;
5) Three-axle trucks with a total cargo mass of more than 25,000 kg; three-axle car trains, with a total cargo mass of more than 27,000 kg;
6) four-axle trucks with a total cargo mass of more than 31,000 kg; four-axle car trains, with a total mass of more than 36,000 kilograms;
7) Five-axle car trains, the total mass of which exceeds 43,000 kg;
8) The total mass of automobile trains with six axles and more than six axles exceeds 49,000 kilograms, of which the tractor drive shaft is single-axle, and the total mass of vehicles and goods exceeds 46,000 kilograms.
-
1. How many tons of three-axle vehicles are loaded.
1. The three-axle vehicle is limited to how many tons of overrun, depending on the situation
1) In the case of a three-axle truck, the limit of the maximum allowable gross mass on the road cannot exceed 25 tons;
2) In the case of a three-axle car, the total mass of the train does not exceed 27 tons.
2. Legal basis: Article 2 of the "Road Traffic Safety Violations Recorded in the Value of Split Rent".
If the driver of a motor vehicle commits one of the following violations, 6 points will be deducted at a time:
1) Driving a motor vehicle during the period when the driver's license of the motor vehicle is suspended;
2) Driving a motor vehicle in violation of road traffic lights;
3) Driving a passenger car (excluding buses) or a school bus with more than 20% of the approved number of passengers, or driving other passenger cars with more than 20% of the approved number of passengers;
4) Driving medium-sized or above passenger and cargo vehicles, school buses, and dangerous goods transport vehicles on highways and urban expressways that exceed the prescribed speed by less than 20%;
5) Driving medium-sized or above passenger and cargo vehicles, school buses, and dangerous goods transport vehicles on roads other than highways and urban expressways, or driving other motor vehicles that exceed the prescribed speed by 20% or more but do not reach 50%;
6) Driving a truck with more than 30% of the approved load weight or carrying passengers in violation of regulations;
7) Driving a motor vehicle other than a passenger car to stop in a highway lane;
8) Driving a motor vehicle on a highway or urban expressway to illegally occupy an emergency lane;
9) Driving a motor vehicle on a highway without following regulations under low visibility meteorological conditions;
10) Driving a motor vehicle to carry items that exceed the limit and can be disintegrated, failing to drive at the designated time, route, or speed, or failing to hang a conspicuous mark;
11) Driving a motor vehicle to transport ** articles, flammable and explosive chemicals, highly toxic, radioactive and other dangerous goods, failing to drive according to the designated time, route, speed or failing to hang warning signs and take necessary safety measures;
12) Replacing a motor vehicle driver's license by concealment or deception;
13) Continuously driving a motor vehicle other than a medium-sized or above passenger vehicle or a dangerous goods transport vehicle for more than 4 hours without stopping for a rest or stopping for a rest period of less than 20 minutes;
14) driving a motor vehicle not in accordance with the provisions to avoid school buses.
Second, what are the hazards of overloading and overrun.
1. Destruction of highway facilities, vehicle overloading and overloading seriously damage highway infrastructure, resulting in road surface damage, bridge breakage, and greatly shortened service life;
2. The danger is high, the mass increases and the inertia increases, the braking distance is lengthened, and the danger increases, which may cause various accidents.
-
Whether the three-axle vehicle is overloaded with 26 tons depends on whether you have a total of 26 tons of goods or 26 tons of goods alone.
According to the law, the total mass of three-axle trucks exceeds 25,000 kilograms; The total mass of the three-axle Huaihuai automobile train with a total mass of more than 27,000 kg is an overrun transport vehicle.
-
1. Is 26 tons of three-axle vehicles overloaded?
1. The three-axle vehicle of 26 tons is not considered overloaded. The transportation department pointed out that for the total weight of the body and cargo of the two-axle vehicle exceeding 20 tons, the total weight of the three-axle vehicle exceeding 30 tons, the total weight of the four-axle vehicle exceeding 40 tons, the total weight of the five-axle vehicle exceeding 50 tons, and the total weight of the vehicle and cargo of the six-axle and more than 55 tons, it should be recognized as an overloaded vehicle and be corrected.
2. Legal basis: Article 92 of the Road Traffic Safety Law of the People's Republic of China.
Highway passenger vehicles carrying more than the rated occupants shall be fined not less than 200 yuan but not more than 500 yuan; Anyone who exceeds 20% of the rated occupancy or carries goods in violation of regulations shall be fined not less than 500 yuan but not more than 2,000 yuan. If the freight motor vehicle exceeds the approved load weight, a fine of not less than 200 yuan but not more than 500 yuan shall be imposed; Anyone who exceeds 30% of the approved load weight or carries passengers in violation of regulations shall be fined not less than 500 yuan but not more than 2,000 yuan. If there is any act in the preceding two paragraphs, the traffic management department of the public security organ shall detain the motor vehicle until the illegal state is eliminated.
Where the vehicles of transport units have the circumstances provided for in paragraphs 1 and 2 of this article, and they do not change after punishment, the person in charge who is directly responsible shall be fined not less than 2,000 yuan but not more than 5,000 yuan.
2. How to punish overloading of three-axle trucks.
The penalties for overloading a three-axle truck are as follows:
1. If the total height of the vehicle and cargo does not exceed the meter, the total width does not exceed 3 meters and the total length does not exceed 20 meters, a fine of less than 200 yuan may be imposed;
2. If the total height of the vehicle and cargo does not exceed the meter, the total width does not exceed the meter and the total length does not exceed 28 meters, a fine of between 200 yuan and 1,000 yuan shall be imposed;
3. If the total height of the vehicle and cargo exceeds the meter, the total width exceeds the meter or the total length exceeds 28 meters, a fine of between 1,000 and 3,000 yuan shall be imposed;
4. If the total mass of the vehicle and cargo exceeds the limit standard specified in the fourth to eighth items of the first paragraph of Article 3 of these provisions, but does not exceed 1,000 kilograms, a warning shall be given; If it exceeds 1,000 kilograms, a fine of 500 yuan shall be imposed for each excess of 1,000 kilograms, and the maximum shall not exceed 30,000 yuan;
5. Where there are multiple violations listed in the preceding paragraph, the amount of fines for the corresponding violations shall be cumulative, but the cumulative amount of fines must not exceed 30,000 yuan.
-
1. 26 tons of three-axle vehicles is not overloaded.
1. The three-axle vehicle is overloaded at 26 tons. Three-axle vehicle and cargo vehicle limit of 25 tons, four-axle vehicle and cargo vehicle limit of 31 tons, freight motor vehicle exceeds the approved load quality, fined between 200 Yuan and 500 Yuan, due to the overload after the vehicle can not reach the normal speed of driving, occupy the lane for a long time, directly affect the smooth flow of the road.
2. Legal basis: Article 49 of the Road Traffic Safety Law of the People's Republic of China.
Motor vehicles shall not carry more than the approved number of people, and passenger motor vehicles shall not carry goods in violation of the provisions of the shed.
Article 92.
Highway passenger vehicles carrying more than the rated occupants shall be fined not less than 200 yuan but not more than 500 yuan; Anyone who exceeds 20% of the rated occupancy or carries goods in violation of regulations shall be fined not less than 500 yuan but not more than 2,000 yuan.
If the freight motor vehicle exceeds the approved load weight, a fine of not less than 200 yuan but not more than 500 yuan shall be imposed; Anyone who allows the carriage to carry more than 30% of the approved load mass or carries passengers in violation of regulations shall be fined not less than 500 yuan but not more than 2,000 yuan.
If there is any act in the preceding two paragraphs, the traffic management department of the public security organ shall detain the motor vehicle until the illegal state is eliminated.
Where the vehicles of transport units have the circumstances provided for in paragraphs 1 and 2 of this article, and they do not change after punishment, the person in charge who is directly responsible shall be fined not less than 2,000 yuan but not more than 5,000 yuan.
Second, how to punish overload.
1. If the highway passenger vehicle carries more than the rated occupant, it shall be fined not less than 200 yuan but not more than 500 yuan, and if it exceeds 20% of the rated occupant or carries goods in violation of the regulations, it shall be fined not less than 500 yuan but not more than 2,000 yuan;
2. If the freight motor vehicle exceeds the approved load weight, a fine of not less than 200 yuan but not more than 500 yuan shall be imposed, and if it exceeds 30% of the approved load quality or carries passengers in violation of the regulations, a fine of not less than 500 yuan but not more than 2,000 yuan shall be imposed.
Single-axis robots are also known as single-axis manipulators, electric slides, linear modules, single-axis drives, single-axis robots, etc. in China. Single-axis robots can achieve two-axis, three-axis, and gantry combinations through different combination styles, so multi-axis is also called: Cartesian coordinate robots. >>>More
Zhang Liao, Xu Huang, Le Jin (both civil and military) Dian Wei, Xu Chu, Xiahoudun (violent flow) Strategists - Cheng Yu, Xun Yu, Xun You, Guo Jia!
Trucks generally have a large fuel content in China III; The fourth emission standard is the fourth stage of the national motor vehicle pollutant emission standard, the main pollutants emitted by automobiles are HC (hydrocarbons), NOx (nitrogen oxygenate), CO (carbon monoxide), PM (particulates), etc., through the application of better catalytic converter active layer, secondary air injection and exhaust gas recirculation system with cooling device, etc., to control and reduce the emission of pollutants from vehicles to the specified value below the standard. >>>More
The picture below shows the comparison table between the model and the driver's license, which can be compared.
College Entrance Examination Volunteering: Whether to obey the adjustment is not dispensable as you imagine, but a choice that may affect your life.