Where to buy a bulk feed truck, how much is a car to transport bulk feed

There are bulk feed trucks from 100,000 to 400,000, and there are many kinds of bulk feed trucks such as small, medium and large. Small bulk feed trucks are generally between 150,000, medium-sized bulk feed trucks are generally between 200,000 and 300,000, and large bulk feed trucks are between 400,000 and 450,000.

Pls do you have bulk feed trucks for sale there.

At present, there are many large-scale breeding enterprises and feed enterprises in bulk feed are outsourcing mode, they have their own transportation route bidding platform can be used for bidding.

The first low price of bulk is to let everyone see the economic benefits that can be saved after using bulk feed trucks. Now from the breeding plant and feed mill side of the case illustration: the comparison between bagged transportation and bulk feed tank transportation can be intuitively seen from the above table:

1. In terms of loading costs, bulk transportation is 6 yuan less than bag packaging transportation. 2. In terms of packaging costs, bulk transportation is 25 yuan less than bag packaging transportation. 3. In terms of unloading costs, bulk transportation is 15 yuan less than bag packaging transportation.

4. In terms of loading time, bulk transportation saves 40 minutes compared with bag packaging transportation. 5. In terms of unloading time, bulk transportation saves 35 minutes compared with bag packaging transportation. Bulk feed tank transportation greatly reduces production costs as well as wasted time.

Feed depot factory opinions.

I have a tank truck that specializes in pulling bulk feed, and I want to help major feed mills pull feed, how can I join??

Food safety.

At present, there are 12 cubic meters, 22 cubic meters, 30 cubic meters, 40 cubic meters, 60 cubic meters and other volumes of bulk feed trucks, and different quantities of bulk feed trucks can be selected according to different needs. The largest number of bulk feed truck manufacturers in China are in Suizhou, Hubei, and you need to know more about bulk feed trucks can go to the field for inspection. The following is a specific introduction to several bulk feed trucks:

1. Dongfeng Tianjin 22 square bulk feed truck.

Dongfeng Tianjin 22 square bulk feed truck can be loaded with 13 tons of chicken feed, 11 tons of pig feed, and tons of standard feed.

Chassis configuration: Dongfeng Tianjin chassis production, chassis model: DFH1180BX1V, Dongfeng Tianjin cab, Cummins 180 horsepower engine, Fast 8-speed gearbox, 5000mm wheelbase, wire tires, electric doors and windows, central locking, air conditioning, ABS, direction assistance.

Bodywork configuration: the tank material is made of 4mm high-quality carbon steel plate, the vehicle has 3 augers, driven by 3 motors, and the top auger is lifted with hydraulic control, which can rotate 180 ° left and right. The tank can be divided into multiple independent silos according to user requirements, and the unloading sequence and speed of each silo can be independently controlled.

Second, Dongfeng Tianjin 30 square bulk feed truck.

Dongfeng Tianjin 30 square bulk feed truck can be loaded with 18 tons of chicken feed, 15 tons of pig feed, and tons of feed are loaded.

Chassis configuration: Dongfeng Tianjin cab, Cummins 245 horsepower engine, Fast 8-speed gearbox, 1800 + 5000mm wheelbase, steel wire tires, electric doors and windows, central locking, ABS, direction assistance, air conditioning, environmental protection + fuel, vehicle size: 10980 2480 3930mm.

Bodywork configuration: the tank material is made of 4mm high-quality carbon steel plate, the vehicle has 3 augers, driven by 3 motors, and the top auger is lifted with hydraulic control, which can rotate 180 ° left and right. The tank can be divided into multiple independent silos according to user requirements, and the unloading sequence and speed of each silo can be independently controlled.

At present, the market mainly launched 4 cubic tanks, 5 cubic tanks, 6 cubic tanks, 8 cubic tanks, 11 cubic tanks, 15 cubic tanks, 22 cubic tanks and other large and small tank models. At the same time, it can also provide customers with customized services for feed semi-trailers of various tonnages.

1. The feed truck can basically be customized according to the customer, but the size that can be licensed is 4 cubic meters, and it is more than 2 tons.

8 cubic meters, pull 4 tons of material.

12 cubic meters, pulling more than 6 tons.

20 cubic meters, pull more than 10 tons.

30 cubic meters, pulling 15 tons.

40 cubic meters, pull 20 tons of bulk feed, if you don't have a license, you can customize the suitable amount according to your requirements.

2. There are many sales places, and Hubei Chengli feed truck is also very professional.

The feed tank of the bulk feed truck is erected on the chassis of the truck, and there is a feed opening on the top of the tank. A spiral conveying discharge pipe (commonly known as a discharge auger) at the top can be freely rotated and lifted, and the elevation angle of lifting can reach 60 degrees. When transporting, the spiral tube at the top lies flat on the top of the tank; When unloading, then lift, make the discharge port of the pipe end and the feed door at the top of the storage tank of livestock and poultry breeding farm connected, and the cab is equipped with a control device (the control device can also be installed at the tail of the tank), and the screw is driven by the power take-off shaft and the reducer at the bottom of the car when unloading, so as to complete the unloading.

At present, China mainly launched 3T, 5T, 8T, 11T, 15T and 22T tonnage models.

The use of bulk feed trucks is as follows

1. Park the vehicle in a suitable locationto ensure that the body is stable and must not be seriously tilted;

2. Turn on the 380V external power supply, and start and stop respectively at no load""Horizontal auger", "vertical auger", "lifting auger"" start and stop button test, check whether the rotation direction of the auger is consistent with the rotation mark, if it is inconsistent, turn the ""commutation switch" on the panel of the control electric box.

Note:The steering of the motor must be corrected for the first time at a power connection point or after the maintenance and replacement of the motor and electrical appliances to ensure that the rotation direction of the auger is consistent with the mark. It is strictly forbidden to discharge the material if the rotation direction is incorrect, otherwise it will cause blockage and damage to the equipment.

3. To the discharge port

Turn the "Manual Remote Control" switch to the corresponding control position;

Press the "Hydraulic Start" button to start the hydraulic motor;

Turn the knob of """Rise and Fall" to the rising position to lift the lifting auger to the appropriate position;

Rotate the knobs of ""

Press the "Hydraulic Stop" button to turn off the hydraulic motor;

Note:It is strictly forbidden to activate the left and right rotation buttons when the "lifting auger" is not raised, otherwise the rotation system will be damaged. When the auger rotates, pay attention to avoid obstacles within the rotation radius, and it is strictly forbidden to operate the discharge under the high voltage line.

After completing the alignment, remember to turn off the hydraulic TV, otherwise it will cause the motor to burn out at high temperature if it is in a high-load working state for a long time.

4. Unloading.

Press the "Lifting auger start", vertical auger start, horizontal auger start" button in turn to start the conveyor system;

Push the discharge handle, adjust the opening of the discharge valve to ensure the smooth discharge of the auger, and start unloading from the rear storage bin of the vehicle in turn;

Note:: The start and stop of the conveyor system is a sequential operation, otherwise the action is invalid. Do not open the discharge valve to the maximum opening at one time, otherwise it will cause blockage.

The size of the indicated value of the ammeter can judge the size of the material conveyed in the corresponding auger.

5. Complete the unloading.

Push the discharge handle, close the discharge valve, and complete the discharge;

Press the "horizontal auger stop", vertical auger stop", and lifting auger stop" buttons in turn to close the conveyor system;

According to the operation method of step ""three", homing lifting auger;

Disconnect the power supply, pack up the relevant tools and items, and lock the electrical box and toolbox.

Dongfeng Tianlong 40 square bulk feed truck configuration instructions.

Chassis configuration: Dongfeng Tianlong chassis, Cummins 290 horsepower National IV engine, 5 tons of double front axle, 10 tons of rear double axle, 9-speed gearbox, steel wire tires, flat top cab, with original air conditioning, with ABS

Modification configuration: the tank body is made of high-strength and high-quality Wuhan Iron and Steel, which can be 30 40 cubic meters according to customer requirements, and can be divided into multiple warehouses for loading and unloading a variety of different feeds, and the standard sub-silos are 3, which can strengthen the strength of the tank. Media:

extruded and pellet feed, meal, corn; Density: 500 kg cubic meters. And according to the actual situation of the user, you can choose the electric auger type (three-phase electric supporting place) or hydraulic auger type (no three-phase electric place).

The electric auger bulk feed transport truck is a new product developed for different customer groups to meet the low-end market, the car is equipped with an on-board generator, and the electric auger uses the mains three-phase 380V to power supply. It is suitable for long-distance transportation, large-scale farms, feed mills. The mechanical spiral unloading method is adopted, the unloading speed is fast, and the continuous operation can be carried out, which greatly improves the production efficiency.

Electric auger type: suitable for feed loading and unloading transportation in three-phase power and electric supporting places;

The feed tank of the hydraulic bulk feed transport truck is erected on the chassis of the truck, and the special facilities are composed of tank assembly, conveying system (horizontal discharge system, vertical discharge system and movable discharge system), hydraulic system (the high-pressure oil pump is connected to the distribution valve through the pipeline and the three output ends of the valve are the corner hydraulic motor, the lifting cylinder and the horizontal discharge, vertical discharge, and movable discharge hydraulic motor that are connected in series), electric system, pneumatic bin mechanism, etc. At the bottom of the tank body is provided with a gate, a horizontal screw conveyor (commonly known as horizontal agitation cage) is installed below the gate, driven by the power take-off by the output power of the automobile gearbox, and then the high-pressure oil pump is driven to drive the hydraulic system, and the hydraulic motor drives the blade shaft and blade rotation of the horizontal screw conveyor through the transmission device, and the feed is output through the movable conveying system (commonly known as the movable agitation cage). A movable unloading auger on the flat roof can rotate and lift freely, and when transporting, the spiral tube at the top lies flat on the top of the tank; When discharging, it is lifted, so that the discharge port of the pipe end is connected and aligned with the feed door at the top of the storage tank of the livestock and poultry breeding farm to complete the unloading.

Imported domestic hydraulic parts, easy to repair and maintain, hydraulic auger type: suitable for feed loading and unloading transportation in places without electric power.

Dongfeng Tianjin 10 ton bulk feed transport truck.

Dongfeng Tianjin 15 ton bulk feed transport truck.

Chassis configuration: Cummins 292 horsepower engine, Fast 9-speed gearbox, 1850 + 4600 + 1350mm wheelbase, 280mm girder, steel wire tires (a total of 13), Dongfeng Tianlong high-roof double-bedroom cab, with original air conditioning, with tachograph, with ABS braking system, with direction assistance, with exhaust brake, clutch assistance, air brake, urea tank, etc.

Square bulk feed tank configuration: tank dimensions 9000 2400 2600 (mm), tank volume, default divided into 4 bins, discharge auger length meters (feeding height meters).

High configuration of 45W

Transporting feed only? Recently, the feed premix of Vantste Te Fa went out, and the logistics company said that the freight would rise, and it was difficult to find a standardized industry car.

It depends on what brand of car you are.

1. Bulk transportation of feed is not only labor-saving and lower cost than packaging and bag transportation, but it requires livestock and poultry farms to have storage materials for feed.

Pot. 2. The bulk feed is sealed and conveyed in the tank to reduce losses, ensure quality and avoid pollution. It can be operated continuously, which greatly improves production.

3. Fully automatic hydraulic system, simple to operate and easy to use. The chassis adopts the chassis of a truck, and other components, gear pumps, hydraulic motors, etc. are also standardized, and imported hydraulic parts are localized, which provides convenient conditions for maintenance and maintenance.

4. The tank can be equipped with sub-silos, which can transport a variety of different types of feed or extruded media at the same time.

Bulk Feed Truck Classification:

1. According to the unloading method, it can be divided into: automatic hydraulic unloading bulk feed truck and electric unloading bulk feed truck.

2. According to the form of the vehicle, it can be divided into: vehicle bulk feed truck and semi-trailer bulk feed truck.

tag: bulk feed truck feed truck bulk feed transport truck feed transport truck.

5. Standardized components, easy to maintain. By 2013, the bulk feed transport vehicles produced by our factory have vehicle type and independent tank type (which can be used for corresponding truck transportation). According to the driving form, there are l electric unloading bulk feed trucks, full hydraulic unloading bulk feed trucks and air unloading bulk feed trucks.

It can provide customers with customized services for feed trucks of various tonnages.