Several ways and processes of paint stripping, how to use paint strippers

In the process of stripping paint, small objects are directly put into acetone for 5 minutes, and they can be scrubbed and dried with a light silk ball or brush.

PU and PE paints cannot be directly washed off or soaked off with solvents such as acetone, DMF or other thinners, and can only be treated with special paint removers. The general method is to spray the paint stripper directly on the surface of the paint film for 10 to 15 minutes to wipe it off.

<>1. High-chain temperature-aware decomposition and paint stripping method: requires a large amount of fuel resources. Pyrolysis can be done by means of open flames, shed depyretic cleaning furnaces, hot fluidized bed furnaces, molten salt baths and lasers.

2. Paint stripper draft paint stripping method: It is the most commonly used paint stripper variety, which is easy to use, high paint removal efficiency, and less corrosive to metal.

When our walls are accidentally stained with paint, it will be very unsightly, but ordinary methods can not remove it, then we will use paint remover, the following pchouse will tell you how to use paint remover.

1. Immersion type.

Soak the items that need to be depainted, or some work pieces, in the paint remover, at least a minute, the old paint on the items will swell, and after puffing up, it will all fall off, and then wash it with water. It is suitable for items that need to be completely painted.

2. Brushing.

Evenly brush or spray the paint remover on the surface of the dry paint film, and wait for the paint film to wrinkle and break away from the original substrate. The paint film can be washed or removed by sleeping. The thicker paint layer can be removed after the paint film is softened and removed, or it can be repeated after two times of painting, and the paint will be removed after the glass is thorough.

3. Special brushing type.

There is also a special soaking method, in which the paint stripper is poured into an antiseptic container, and then an appropriate amount of water is added to avoid the volatilization of the paint stripper. The processing time varies depending on the resin. When brushing, apply directly to the surface of the paint film, and the paint film will slowly bulge and fall off.

Hello dear ! The fastest way to strip paint is that you can use paint removers. Start by applying the paint remover to the surface where the paint needs to be stripped and wait for the appropriate amount of time, usually between a few minutes and a few hours.

When the paint starts to blister or peel, you can use a scraper or steel wool ball to gently scrape the missing and clean the surface with water. When using paint remover, you should pay attention to protective measures, wear gloves, glasses, etc., to avoid damage to your eyes and eyes, and keep it well ventilated to avoid inhaling harmful gases. <>

Hello to you, I'm glad to answer for you! The fastest way to remove paint is to use a chemical paint remover, choose a chemical paint remover that is suitable for the surface to be treated, dilute or prepare it according to the instructions on the instructions, and apply the paint remover evenly on the surface to be treated, ensuring that all coatings are evenly covered. If the surface crack area that needs to be treated is large, it can be quickly covered with tools such as brushes or sprayers.

Wait a few minutes for the paint stripper to start a chemical reaction that softens and separates the paint. The exact time depends on the type and thickness of the paint stripper, but usually takes 5-15 minutes. Use a physical tool such as a scraper or steel wool ball to easily remove softened paint on the surface, dear, thank you for your trust, the above is my reply, I hope it can help you, I wish you good health and a happy life.

Probably the quickest way to peel off paint is to use a chemical solvent. Here are some common chemical solvents:1

Acetic acid: Apply acetic acid to the paint and wait a few minutes. You can use a scraper or wire brush to scrape the paint off the surface.

2.Alcohol: Apply alcohol to the paint and scrape off using a scraper or wire brush.

3.Paint finish: Apply paint finish to the paint, wait a few minutes, and then use a scraper or wire brush to gently scrape off.

4.Paint thinner: Apply the paint thinner to the paint, let it sit on the surface for a few minutes, then allow it to be gently scraped off with a scraper or wire brush.