-
Anonymous users2024-02-07Reinstall the system, or use Ghost to back up the files on the HDD and restore them to the SSD.
-
Anonymous users2024-02-061. Before operating, please make sure that the SSD has been installed on the computer and plugged in the data cable and power cable.
2. Press and hold the DEL key to enter the BIOS when the computer is turned on.
3. After entering the BIOS, use the up and down arrow arrows to select System Summary and press the Enter key.
4. Then find SATA DRIVE 0 1 2 to check whether the SSD you installed has been recognized.
5. After seeing the installed SSD, press the ESC key to return to the main interface, use the left and right arrows to select the startup boot settings, use the up and down arrows to select the primary boot sequence, and click the enter key to enter.
6. Use the up and down arrows to select the solid-state drive (SSD) you have installed, and press the "+" button to adjust to the first position (the top position).
7. After adjusting to the first position, press the F10 key to save the settings and exit, a window will pop up at this time, select Yes.
8. The computer is restarted at this time, and the F12 key is pressed non-stop when starting, and a dialog box pops up: at this time, you can see that the installed Intel SSD has been the first boot item, press the Enter key.
-
Anonymous users2024-02-05Here's how to install a new SSD:
Tools Raw materials: ASUS A456U, win10 system, hard disk interface, installation tools.
1. Purchase an SSD, first check the capacity and interface of the SSD, now there are many interface types of SSD, such as SATA, PCI, etc., we confirm the interface, install the SSD on the motherboard of the computer, and set the SSD as the main hard disk in the BIOS.
2. The next step is to partition the SSD, after we enter the maintenance system, start the partition tool to load the SSD.
3. After the SSD is loaded successfully, we click on the partition and select Create Partition.
4. We can determine whether to divide one partition or two partitions according to the capacity of the SSD. In this demonstration, a partition is used and the partition format NTFS is created.
5. Because it is an SSD, we need to select the SSD partition alignment option in advanced mode.
6. After all the settings are completed, we click the Submit These Settings button on the partition tool interface.
7. Wait for the completion of the operation, and we should not have any operation in the middle to avoid errors. Once the operation is complete, we can activate the partition and we can install the Windows system we need.
-
Anonymous users2024-02-04Summary. If you have bought a new SSD and want to use it as a system disk, you can follow the steps below:1
Connect the SSD to your computer and make sure your computer recognizes it. 2.Open your computer's BIOS settings and set the SSD as your boot disk.
4.On the system installation page, select Custom Installation or Advanced Installation to enter the partition page. 5.
On the Partition page, select the SSD as the system disk for partitioning and formatting. In general, it is recommended to divide the SSD into two partitions, one for mounting the system and the other for storing data. 6.
After partitioning and formatting, select the SSD as the system installation target and perform the system installation operation. During the installation process, you need to enter the relevant system installation information and settings. 7.
Once the installation is complete, restart your computer and enter the newly installed system. 8.In the new system, install the relevant drivers and software, as well as set up and optimize the system.
If you have bought an SSD and want to use it as a system disk, you can follow the steps below:1Connect the SSD to your computer and make sure your computer recognizes it.
3.Use the system installation disk or USB flash drive to start the computer and enter the system installation interface. 4.
On the system installation page, select options such as "Custom Installation" or "Advanced Installation" to enter the partition interface. 5.On the Partition page, select the SSD as the system disk for partitioning and formatting.
In general, it is recommended to divide the SSD into two partitions, one for mounting the system and the other for storing data. 6.After completing the partitioning and formatting operations, Lu Shuxin selects the SSD as the system installation target and performs the system installation operation.
During the installation process, you need to enter the relevant system installation information and settings. 7.Once the installation is complete, restart your computer and enter the newly installed system.
8.In the new system, install the relevant drivers and software, as well as set up and optimize the system.
In short, using an SSD as a system disk requires a series of operations and settings, which requires certain technology and lease-based testing. If you are not familiar with these operations, it is recommended to seek professional help or refer to the relevant tutorials and guides.
-
Anonymous users2024-02-03The SSD does not have to be a system disk, but if it is done to open quickly, it is not easy to stop working in the commonly used software games. It's no problem to install some software and movies on a regular disk.
-
Anonymous users2024-02-02Remove the HDD and install the system on the SSD.
With the popularity of solid-state drives, its advantages over mechanical hard disks in speed are becoming more and more obvious, but solid-state drives are generally higher, so many friends will buy relatively cheap and smaller solid-state drives to make system disks, which will not cost too much money while improving the speed of the computer.
SSD becomes a system disk installation steps:
Install the SSD Yukei into your computer.
Enter the computer BIOS and place the SSD in front of the original HDD in the boot sequence.
Install the system, please refer to [How to install the system on the Samsung SSD] for the installation method of the system, and the disk management interface will appear during the installation of the system, and you need to select the partition on the SSD to install the system.
After waiting for the system installation to be completed, the SSD is already the system disk of the new system, you can experience the speed improvement brought by the SSD to the system, and the original mechanical hard disk can be used to store files, which is a perfect match at the moment.
The boot motherboard recognizes the SSD, partitions and formats the SSD under the original hard disk system. Pay attention to the 4K alignment, otherwise the life of the SSD will be affected. Use ghost software to clone the system of the HDD to the SSD. Set up your computer to boot up with an SSD. >>>More
Yes, the read and write speed of the SSD is much faster than that of the HDD, and the data on the hard drive needs to be read to load the game, and the faster read and write speed will naturally make the game load faster, provided that the game must be installed in the SSD, but since the SSD does not participate in the calculation, it will not increase the FPS.
When we use the computer, we may feel that the storage space of the computer is not enough, so we will install additional SSDs. >>>More
1. Before operating, please make sure that the SSD has been installed on the computer and plugged in the data cable and power cable. >>>More
Teaching evaluation is an indispensable part of the teaching process, which can help teachers understand students' learning and teaching effectiveness, so as to further improve teaching methods and improve teaching quality. Here's how to effectively evaluate your teaching. Refers to a sedan chair. >>>More