I just bought a new home in Australia There is a satellite pot outside What else do I need How to wa

It's too far, and I can do it for you in China.

Generally, the pot seller will install it for you, or you can get it yourself, and after installing the parts on the pot, you must adjust the angle of the pot (that is, aiming at the satellites in the sky). Slowly move the satellite pot up, down, left and right until you have a clear image on the TV, and that's it.

The installation fee is not easy to save, is there no installation plan when you buy it?

Method: The first step is to have a smart network TV, which requires support for Android version or above.

The second step is to contact the TV network first and make sure that the TV can access the Internet.

CCTV or IPTV set-top boxes will also work.

Networking methods for home smart TVs.

No, only closed circuits, or old old antennas.

Network set-top box,There must be a network cable of more than 4m,Don't operate others when watching TV,Otherwise, it will get stuck。

At present, the center number 9 has been encrypted. I can only wait for it to be cracked.

zhi and patience,But to ensure that dao100% find the signal,Generally you use the pot of rice to collect most of the Zhongxing6B,Most of the built-in programs of the set-top box are also Zhongxing6B programs,First turn the plane with the high-frequency head printed with data to the direction of 8 o'clock,The depth is about 40 on the scale,Connect the line,Then turn on the computer to see the picture,Find Fujian station (the signal is relatively strong),Press the remote control information key (part of it is the info key),Display the signal bar, Connect the line strength on the display can only indicate that your wire is connected, the strength value does not care, the signal quality indication is generally 0 or very small, the pot is aimed at the south and loosen the elevation angle screw and slowly shake the pot up and down, if there is no signal quality will increase, if there is no signal, turn a little angle to the east or west, shake the pot up and down repeatedly, and so on, it is equivalent to a slow scan of the pot facing the sky, add time patiently, you will inevitably get to the satellite in about half an hour, and then fine-tune the angle to jump the signal quality to the highest, Fix the pot and then go back and fine-tune the depth and angle of a high-frequency head, and the signal quality is also jumped to the highest level.

Find someone who has experience to learn, and adjusting satellite signals is not something you can just put on the table.

You actually said so much above, the next two are a complete set, and the next two sets can be used; Of course, you have to have a set-top box to buy a pot, how to use it without a set-top box, and you usually bring it when you buy a pot!

It can be used with wires and a set-top box, and the set-top box is an upgraded version of cable TV!

Buy a small pot lid, more than 100 yuan.

I think it should be a problem with your debugging. What is the signal quality of the station that can be seen? If the signal quality is weak, there will also be a lack of stations. What does the main menu of your little satellite pot look like?

If yes, select the TV program and then press the small pot remote control number key 1, then the password 0000, OK and then press the number 4 to delete the station.

It could be channel encryption or the angle at which the pot is placed.

The box will be switched automatically, and the receiver will automatically adjust the program after it is set. Don't change lines back and forth.