How do cars use lights at night? How to use lights correctly when driving at night?

Driving at night is inseparable from the illumination of lights, and if the lights are used incorrectly, it will not only affect the observation of the situation on the road, but also cause traffic accidents. Turning on the headlights is not just for illumination, but more importantly for other traffic participants to be able to observe the car's presence. Poor sight at night, reasonable and civilized use of lights is the key to safe driving.

Therefore, the following should be paid attention to when using lights:

1. The turning time of the car lights should be the same as that of the street lights. If it is cloudy, foggy, windy or rainy, you should turn on the lights in advance to ensure good visibility.

2. Turn on the lights before starting and see the road ahead before driving. When parking, you should stop first and then turn off the lights.

3. If the speed is less than 30 kilometers per hour, low beams can be used, and high beams should be used if the speed is more than 30 kilometers. On roads with street lights, turn on the low beams.

4. The driver shall control the speed of the vehicle according to the actual road situation, so that the vehicle keeps moving in a straight line on the right side of the road; Eyes should not look directly at the lights of the other party's oncoming vehicles, but can look at the right side of the road to avoid the interference of the direct lights of the other party's oncoming vehicles.

5. Try to use high beams in places with poor lighting at night, and when there is an oncoming car on the opposite side, you should switch the lights to low beam in time, so as not to dazzle the driver on the opposite side.

6. When driving in urban areas or road sections with good lighting conditions at night, you should use low beams to drive at a safe speed, and at the same time, with the help of street lights, try to expand your field of vision to areas other than the headlights.

7. When passing through an intersection with traffic police command or traffic lights, the headlights should be turned off at a distance of 30 to 50 meters from the intersection and small lights should be used instead.

8. When temporarily parked on the side of the road, turn on the small lights, tail lights and width indicators.

9. If you meet a car on a road without street lights or with poor lighting, you should use the high beams and low beams alternately 150m away from the oncoming car on the opposite side, and then change the high beams to low beams. Turn on the high beams to observe the traffic on your side of the road; The purpose of turning on the low beam is to let the opposing vehicle turn on the high beam to observe the traffic situation on the road.

10. When encountering the opposite vehicle and not switching to low beam, you must treat it calmly, reduce your speed, and observe the oncoming vehicle with the residual vision of your eyes while observing the right edge of the road.

Ten. 1. At night, when passing through sharp bends, slopes, arch bridges, pedestrian crossings or intersections without traffic signal control, far and near lights should be used alternately.

Ten. 2. When driving in heavy rain or fog, the warning lights, fog lights and hazard warning flashers should be turned on.

Ten. 3. When there is a breakdown or traffic accident on the road at night, obstructing traffic and it is difficult to move, the hazard warning flashing lights, marker lights and rear position lights should be turned on.

Ten. 4. When encountering vehicles or pedestrians crossing the road in front, reduce the speed of the vehicle and switch the lights to indicate vehicles and pedestrians coming and going in the left and right directions.

Ten. 5. Try not to turn on the lights in the car, because when driving at night, your eyes will gradually adapt to the dark environment; If you turn on the interior lights, it will cause a sudden decrease in the vision that has been adapted to the dark environment, affecting the driver's vision.

Hello At night, vehicles should close their high beams at a distance of 150 meters, switch to low beams, and at the same time reduce their speed, choose a wide and straight place to meet, and when the two cars will be in the wrong place, you can turn on the high beams.

Car Tutorial for Novices: How to Use Lights to Drive at Night.

How to use lights properly when driving at night? It takes 2 minutes for novices to learn it and they will be able to use it when driving.

Since it is troublesome to publicize, let's talk about comprehensively, and the lights will not change when the car will be opened? Do you want to change the lights behind someone else's car? It's much more effective to check in the evening than to advertise here!

You don't want to popularize it.,As long as you officials go to the street a few times.,Everyone will use it.,I don't believe you try it.,Of course,Even if you believe it, you won't care.。。。

How to use lights correctly when driving at night?

Some people think that the horn is the most direct language of the car, but the day does not understand the darkness of the night, driving at night, more important than the horn is the light, the correct use of the light is a necessary skill for the driver.

1. How to use the vehicle's own lights?

Before driving at night, vehicles should turn on their illumination lights and low beams before entering the highway. If there is a vehicle in front of you while driving, you should not use the Tono Banquet lights for a long time. When driving at night, it is necessary to check in advance whether the emergency lights, warning triangles and other necessary and commonly used tools are complete and effective.

2. How to use the "light" of the road?

When the light moves from the middle of the road to one side, it indicates that there is a curve ahead. When the lights move from one side of the road to the other, it indicates that the vehicle has entered a continuous curve. The color of the light illuminating the ground can reflect the condition of the road surface seepage, generally speaking, white is stagnant water, black is potholes, and the normal road surface is mostly gray, usually gray does not go white, and slows down in black.

3. How to use the "reflection" of the other party?

The body reflective sign is an important safety protection facility for trucks, trailers and other vehicles, and it is also an auxiliary facility for vehicle lights. Reflective markings are used to outline the body to maximize the visibility of the vehicle. Therefore, when driving at night and finding that there is a "body reflective sign" in front of you, you need to increase the safety distance in time to prevent rear-end collisions.

4. Use lights for starting and stopping at night.

After starting the engine, turn on the small lights, headlights and low beams, and then turn on the left turn signal before starting. When parking at night, use the right turn signal to pull over and slow down, then turn on the low beam to pull over, and turn off all lights after stopping.

Temporary parking needs to be turned on double flashes to indicate temporary parking. Keep this night driving knowledge firmly in mind!

Cars use high beams well at night. The night vision effect of highway driving is not good, and the speed of the vehicle should be slowed down appropriately. On the highway, there are no street lights, so they are all car lights.

At this time, it is necessary to remember the essentials of using lights at night, turn on the night light, show the width of the light, and turn on the fog lights in case of rain, snow and fog. If there is no car in front of you, you can turn on the high beams appropriately and use the high beams to briefly observe the road conditions in front of you and the surrounding vehicles. In urban areas, drivers can observe the scenery on the road together with the street lights thanks to the powerful lighting system of the street lights.

They can have a clearer understanding of the road surface and surrounding objects than in the first two situations, allowing them to make more timely and accurate judgments while driving. Now more and more friends have obtained driver's licenses, and many friends are in a hurry to drive on the road after the test, but driving on the road is not the same as practicing at a driving school. Because the traffic on the road is too large, the novice driver is not proficient in driving, and our use of the lights is very skillful, which greatly affects our car safety.

The lights in our homes include lights, signal lights, and auxiliary lights.

Next, I will tell you how our cars use these lights well at night, so that in case of emergency, accidents will inevitably occur. Today, xiaobian will introduce to you how to use the headlights correctly at night and how novice drivers should look. When driving at night, the lights are the most important because they give us better illumination and allow us to see more clearly when driving late at night.

But there are also skills and regulations for the use of lights, not to say that you can use whichever light you want, and of course it is not to say that you don't want to turn on the lights, which is very dangerous. Hello everyone. I was the first to learn about cars.

Many novice friends don't know how to control the lights after buying a car.

For example, at night, it is easy to turn on the high beams, causing inconvenience. Most cars' high beams are pushed forward on the left lever. Pulling back is the low beam.

Two more brushes up to alternate distances. In general, in the absence of street lights, high beams are used. This allows you to see farther roads, but if you are in a city with street lights, it is absolutely forbidden.

When the car uses the lights at night, you must remember to turn off the high beams. The lighting conditions are very good when driving on city roads, and it is enough to turn on a low beam when driving. High beams can affect the other person's eyesight and may also cause damage to the eyes of others.

When using lights, be sure to keep them on at all times. Like some darker roads, you should give each other some warnings in advance. You must be careful when driving, otherwise it will have a great impact on yourself.

Double flashing and turn signals are the most important things for novices to master, otherwise there is no way to drive. In heavy rain and fog, the double flashing fog lights should be turned on in time, and the foggy weather must be slowed down. If you don't turn on the lights on a foggy day, the other party will not be able to know that there is someone in front of you.

In summer, when heavy rain is most likely to occur, it may be possible for the other party to find that there is someone in front of it. They will avoid novice drivers, so they will protect their own safety first, and secondly, it will also improve themselves. The turn signal is actually the most commonly used signal, and you must pay attention to the direction when turning.

If you don't go in the right direction, others may misunderstand, and the speed will be very fast. <>

When overtaking, be sure to pay attention to the distance in a straight line, especially at night, and make sure you don't overtake in corners. When overtaking, you can change the lights appropriately, and be sure to give the other party a hint. When driving at night, you must control your speed and keep your distance.

Keep an eye on the vehicle in front of you at all times, and keep yourself in a safe range. <>

In general, when driving at night, be sure to bring some maintenance supplies, such as a spare tire or jack. In the event of a malfunction, it is best if you can fix it by hand, and it is also good if you can't call someone in time to have tools. When driving at night, you should be the most careful, and you must prevent accidents to ensure your safety.

The use of night driving lights is as follows: 1. Use low beam lights when the lighting conditions of urban roads are very good at night; 2. Turn on the high beam on the road with poor lighting conditions at night, but change the low beam in time when you meet the car; 3. High beams are prohibited in foggy weather, because the air transparency is poor at this time, and the lights will form a diffuse reflection effect in the air.

It should be noted that the lights of other cars should not be interfered with. The lights of the car in front of you can cause you to be dizzy to a certain extent, so you can avoid the direct light and block the light through the baffle to prevent the lights from interfering with the driving.

In addition, the trailing car may have its high beams on all the time, reflecting into your eyes through the rearview mirror, which affects you to some extent, and you need to move left and right to avoid the lights. Don't use high beams on foggy days. Fog has a reflective effect, turn on the high beam, the fog will reflect the light to the cab, make the driver's vision blurred, affect the accuracy of his judgment of the vehicle in front, and easily cause accidents.

Generally, low beams should be used when starting and driving on bright roads; If there are no street lights and there are no pedestrians, use high beams, such as on mountain roads, because they allow car owners to see the road ahead more quickly. When the driver overtakes, the driver in front should be informed by alternating low and high beams, and wait until the car in front gives way, and then turn the left turn signal; After overtaking, the owner should also keep a safe distance from the overtaken driver, and then turn the right turn signal and drive back to the original lane. If there is a car coming from the opposite side, you should turn off the high beams immediately to prevent the lights from affecting the driving safety of others.

It is correct to use high beams in open areas and then switch to low beams when you meet the car.

When the two cars meet at night, if the distance is less than 200 meters, you should turn off the high beams in front of the celebration to avoid affecting the other party's line of sight; When driving normally, when the distance from the car in front is relatively close, the car behind should not turn on the high beams, and can only use the low beams, otherwise it will affect the driving of the car in front.

Precautions for driving at night].

1. Pay attention to the brake lights of the front car.

2. Drive on the right side of the road but keep a distance.

3. Remember to turn off the lights in the car.

4. Pay attention to identify carts.

5. Turn on the high beam.

6. Pay attention to the speed of the vehicle.

7. Find a way to prompt when encountering high beam obsessive-compulsive disorder.

Pay attention to the brake lights of the front car. Driving is most afraid of the sudden deceleration or braking of the car in front, in fact, it is the same in the daytime, the most obvious sign of the deceleration of the front car is the red tail lights and high brake lights on both sides of the rear, driving at night for safety, the front answer is not to slow down you also have to slow down.