How to Fix Huawei Super Fast Charge Failure?

If your phone can't enter the fast charging mode, please try to solve the problem as follows:

1. Please confirm whether your mobile phone and charger support fast charging.

Please check the output parameters of the standard charger, judge the charging mode supported by the device according to the information in the following table, and judge whether it has entered the fast charging super fast charging mode through the charging status of the charging interface.

Normal charging: The icon is a single lightning, and the maximum output parameters of the standard charger are 5V 1A, 5V 2A.

Fast charging: The icon is a large and a small double lightning, and the maximum output parameters of the standard charger are 9V 2A and 10V 2A.

Super fast charging: The icon is double large lightning, and the maximum output parameter of the standard charger is 10V or.

2. If your device supports fast charging (or super fast charging) mode, but the normal charging icon (or fast charging icon) is displayed when charging

1) It is recommended that you use the data cable (including the fast charging cable) provided with the device, and the charger and data cable will be detected when charging, and only when the conditions are met can you enter the fast charging super fast charging mode.

a, Both the device and the charger support fast charging Super Fast Charging, and the charging mode is the same. If both the phone and the charger support 9V 2A fast charging, you can enter the 9V 2A fast charging mode.

b. The calibration current of the data line meets the requirements of fast charging and super fast charging in order to enter the fast charging and super fast charging mode. For example, for 5V super fast charging, the data line current needs to be 5A and above (non-standard data cables may not be able to recognize the data cable type).

2) Please check whether there are any foreign objects or dirt in the interface.

If you find any foreign matter or dirt in the interface, it is recommended that you clean it up in time (you can use a clean soft brush, and if possible, you can take alcohol).

If you find that the connector is not fully plugged in, or if it is significantly loose, it is recommended that you reseat it again.

If none of the above methods can solve the problem, it is recommended that you back up your data in advance (QQ, WeChat and other third-party applications need to be backed up separately) and bring your device, charger, data cable and purchase voucher to a nearby customer service center for testing.

When I charge itHuawei phonesThe fast charging suddenly disappeared, and here is the solution to share.

1. First of all, check that Huawei phones need to have super fast charging, as shown in the figure below.

2. Then you also need a super fast charging charging head, and the charging head says "super charge" above it, as shown in the figure below.

3. Then there is also a 5A word on the data line, so that the power can be transmitted, as shown in the figure below.

4. Finally, plug in the mobile phone to quickly charge, as shown in the figure below.

Whether the charger data cable has been replaced, check the charging interface of the mobile phone, whether there is a bad contact point, you can try to turn off the phone and then start, take a look at the fast charging, other reasons are also in the system, whether it has been updated.

Turn on the switch of power-saving mode in the battery interface, and the button will turn blue for on;

At this time, a dialog box will pop up, asking whether to turn on the power saving mode, select [OK];

Finally, turn on the switch of the super power saving function, so that the fast charging function is successfully turned on.

3.It is recommended that you unplug the charger from the connector and plug it in again after 10s.

4. Please confirm whether there is poor contact or damaged interface.

Hello, you can turn off the phone, and then turn on to see if the fast charging is normal, if it is still the same, then look at the mobile phone charging port to see if the contact is not good, you can clean it up, you need to turn off the state, of course, it also depends on whether it has been replaced, the charger and the charging data cable.

Hello Oh you can do this Oh 1 3 Click on the battery to go to the settings of the Huawei phone, and click on the battery option to enter. 2 3 Enter More Battery Settings In the interface entered, click on the More Battery Settings option to enter. 3 3 Turn off the smart charging modeIn the interface you enter, turn off the smart charging mode button.

Generally speaking, mobile phones have slow charging and fast charging modes, if your mobile phone has no way to fast charge, then you should turn off the fast charging function, you only need to turn the fast charging function back on to fast charging.

Huawei phones can't do fast charging, which means that you don't have a fast charger for fast charging at all. That said, if you use flash charging, this should be possible.

What should I do if my Huawei phone can't be fast charged? That must be the battery and the charging port where there is a problem, you can go to the after-sales service. The service area asks. Let him fix it for you.

If you have a Huawei phone, you just can't do fast charging, you can change the charger and see if he can still fast charge after replacing the charger.

What should I do if my Huawei phone can't be fast charged? If you can't fast charge your mobile phone, you may only be able to do this at this time, and you can only use this short-term and long-term first charge or fast charge.

The phone can't be carried out, it's fast charging, is there a problem with that socket under normal circumstances? You try to change the socket.

What should I do if my Huawei phone can't be fast charged? Huawei phones can't be fast-charging, it may be due to poor contact.