The newly bought fish tank can be used for a few days, and how long can the fish be placed when the

The new fish tank can only be released after 6-9 years of water rearing.

First of all, according to your own breeding situation (aquarium species, number of aquariums, etc.), choose a fish tank of the right size. Other equipment for fish farming should also be prepared. For example, lighting rods, thermometers, filtration systems, etc.

The second step is to disinfect the new fish tank first, after which water is poured into the fish tank. At present, most of our aquariums are raised using tap water, well water, and river water. Because the water contains a lot of chlorine, it is necessary to dry the water in the fish tank for 2-3 days without rushing to put the fish in the water.

Third, after 2-3 days of water rearing, the water quality environment should be reasonably regulated according to the conditions of the aquarium organisms raised, and the temperature, pH, and hardness should be adjusted to the range required by the fish, and the fish tank should be oxygenated for 24 hours in advance.

Finally, it is necessary to establish a nitrification system, after raising water, it is necessary to put nitrifying bacteria to open the filter, and after the water quality is clear and turbid, and then after the process of becoming clear, you can start fish farming. Note that it usually takes about 4-6 days to complete this process of water cultivation. Therefore, don't rush to put fish in the fish tank before the water quality is raised.

Once the water and filtration system are raised, the fish can be released.

How long it takes to raise it depends on the specific situation. I have a few tanks, the fastest tank is put away, and after adding water, the temperature is directly adjusted to pass the underwater fish. It took about 45 days to put the tank.

1-2 days is fine, there is no need to let it go for a long time. When putting the new fish into the tank, pay attention to putting the whole bag in the water for 15 minutes to balance the water temperature. This is important! Otherwise, the temperature difference is large and it is easy to die.

Happy fish farming!

Hope, thank you!

The fish can be released after 3 days of opening the tank, the purpose is to let the fish adapt to the water quality, if the fish grow well, you can put other fish together. Before opening the fish tank, it is necessary to disinfect it with potassium permanganate, and the exterior also needs to be properly brushed. After that, tap water can be poured into the tank after 2 to 3 days of drying, and a small amount of nitrifying bacteria can be put in, and the nitrification system can be put into the tank fish after the perfection.

The fish can be released after 3 days of opening. At this time, the fish in the tank is the fish in the tank, the purpose is to let it adapt to the water quality, in order to ensure the stability of the water quality, if the growth state of the fish in the tank is better, you can put other fish into the tank to raise together. The time to test the water is not fixed, it is generally controlled in about half a month, and the shortest time is 1 week.

Before opening the fish tank, the fish tank needs to be disinfected to avoid a large number of bacteria in the tank and affect the normal growth of the fish. Potassium permanganate solution can be poured directly into the tank for disinfection, and the outside can also be properly brushed. After disinfection, it is necessary to wash with clean water to avoid residual substances, which may affect the normal growth of the fish.

After disinfecting the fish tank, you can pour in the appropriate amount of water. Tap water can be left to dry in the sun for 2 to 3 days, and then used after the chlorine in the water has completely volatilized. After the water is discharged, a small amount of nitrifying bacteria needs to be put into the tank, and the water in the fish tank will first become turbid and then become clear.

After the nitrification system is perfected, it can be put into the tank to test the water.

<> new fish tank can be released for 6 to 9 days.

Steps: 1. Disinfect and sterilize the new fish tank first, and then fill the fish tank with water. Because the water contains a lot of chlorine, the water in the tank should be dried for 2 to 3 days.

2. After 2 to 3 days of water raising, the water quality environment should be reasonably regulated according to the conditions of the aquarium organisms raised, and the temperature, pH, and hardness should be adjusted to the required range, and the fish tank should be oxygenated for 24 hours in advance.

3. Finally, it is necessary to establish a nitrification system, after raising water, it is necessary to put nitrifying bacteria to open the filter, and after the process of water quality from clear to turbid and then clear, you can start to raise fish, which generally takes about 4 to 6 days.

1. The new fish tank is generally raised in water for 5-6 days before the fish can be released.

2. Before raising water, it is necessary to sterilize and disinfect first, and then fill the fish tank with water and dry it for 2-3 days, because most of the water contains chlorine.

Drying can eliminate chlorine. Oxygenate the water body for another 1-2 days, and finally establish a nitrification system with an appropriate amount of nitrifying bacteria.

potion, when the water is clear, you can release the fish.

The new tank can be retained for 6 to 9 days.

The reasons for raising fish in the new fish tank are as follows:

1. According to the feeding situation, choose the right fish tank. Other equipment for fish farming should be fully prepared. Such as lighting rods, thermometers, filtration systems, etc.

2. Disinfect and sterilize the new fish tank and inject water into the fish tank. Most aquariums are raised using tap water, well water, and river water. Because the water contains a lot of chlorine, the water in the tank is dried for 2 to 3 days.

3. Reasonably regulate the water quality environment according to the conditions of the aquarium organisms raised, adjust the temperature, pH and hardness to the range of fish need to be sourced, and at the same time oxygenate the fish tank for 24 hours in advance, and the oxygenation cannot be stopped after raising fish.

4. Establish a nitrification system, add the Ashiga nitrifying bacteria solution and open the filter, and after the process of the water quality changing from clear to turbid and then clear, the fish will be put in. It usually takes 4 to 6 days to complete the process of water cultivation.