Why is the Samsung phone always disconnected from the wifi and then automatically connected again, a

Log in to the router management address based on the information on the back of the wireless router (including the router IP address, login username and password).

In the router management interface, switch to the "Wireless Settings" tab and click the "Wireless Encryption" item, where you can set the "Safe Mode".

Click on the "Safe Mode" drop-down list and select the "WPA2-PSK" item from its extended list, which is a secure encryption mode that all phones support.

Click the "OK" button to save the settings. Finally, switch to the "System Tools" tab and click the "Restart Router" button to restart the router.

Finally, you can try to use your mobile phone to connect to the wifi hotspot, if the fault still exists, it is recommended to change to other "safe mode" type to try to solve it.

Hello dear Samsung users:

Recommendations:1Check if other devices have a good or full signal to connect to the wireless network.

2.Check to see if there are many devices connected to the wireless network.

4.If it is a home router, it is recommended to disconnect the power supply for a while and try to plug it in again.

5.If you are using the network operator's wireless network, it is recommended to try a different location.

6.Try a different wireless network.

7.Back up the data in the machine (e.g., contacts, text messages, multi**, etc.), and then restore the factory settings (Settings - Reset Privacy - Factory Reset).

If the problem persists after the above operation, please bring the purchase invoice, repair card and device to the Samsung service center for inspection.

Solution: 1. Turn on the background refresh function of the program.

2. Many Android phones, there will be a wifi hibernation option in the advanced options of wifi, just turn it off.

3. Turn off the power-saving mode.

Based on the energy-saving problem of mobile devices, major mobile phone manufacturers have developed this function to save power and extend the standby time of mobile phones. However, most of the current users are often required to make the phone moment**, so this feature is not popular with a large number of users.

Based on your description, it is recommended that you:1Re-switch your mobile phone and wireless devices 2

Long press and hold the network name - select Forget, turn on the phone WLAN, search for signal connection attempt3Replace static IP attempt 4Whether it is too far away from the wireless router and affects the received signal.

5.If possible, this phenomenon occurs when merging or changing to other routers or wireless connection attempts6Back up your phone data (**book, text message, multi** files, etc.), restore factory settings7

If the problem persists, it is recommended that you send your mobile phone to the nearest Samsung Service Center for testing, and please visit the specific service center address.

Mobile phone settings - WLAN - click the menu button in the lower left corner of the screen - advanced settings - set network connection method - self-slag imitation connection.

If it is an unconnected wireless hotspot and has a password, you need to manually connect it once before it can be automatically connected. If you have changed the password of a connected wireless hotspot, you will also need to re-enter the correct password again before you can connect freely.

A bad wifi signal can be due to the following reasons:

1. The quality of mobile phone wifi hardware is not good;

2. The mobile phone version causes the signal reception of wifi to be poor;

3. The signal of the router at the wifi transmitter end is weak, so you can enhance the signal by approaching the transmitter or consider using a wireless transmitter with higher power.

There are many different reasons for this:

1. The quality of mobile phone wifi hardware is not good, and this needs to be replaced!

2. The ROM version of the hand back to the machine leads to poor WiFi acceptance, and the answer can be solved by flashing.

3. The signal at the transmitter end of wifi is weak, you can enhance the signal by getting close to the transmitter. Or consider using a more powerful wireless transmitter.

Do you often encounter such a situation, resulting in yourself unable to access the Internet? As long as you find the right cause, you can solve the problem with the right medicine.

Answer 1: The WiFi network is automatically turned off.

Go to "Phone Settings - > Wireless & Network - >Wi-Fi Settings", click the "Menu" button at the bottom of the phone, select "Advanced" from the pop-up menu, and then select "Never" from the drop-down menu of "Wi-Fi Hibernation Policy", so that Wi-Fi is always on and never sleeps. Choosing the right wifi hibernation strategy can help you have a better phone experience.

Answer 2: How to use wifi to access the Internet.

If you need to have an available wireless network nearby, go to the "Wireless & Network" menu in your phone's settings, tick "Turn on Wi-Fi", and then go to "Wi-Fi Settings" to search for available Wi-Fi networks. Once you've found it, click Connect.

Answer 3: WiFi cannot be connected to the wireless LAN.

1.If the network has a key, make sure you get it.

2.In addition, some networks have filtering mechanisms (e.g., MAC address filtering) Please make sure that the filtering mechanism does not filter out your phone.

3.Changing the network standard Today's home wireless routers generally support and standard. The network card of the computer is generally supported.

However, many mobile phones only support one of them, please change the network standard and restart the router to try. Also, it is recommended not to select a blending mode.

The above are the three solutions for the mobile phone wifi always disconnects and reconnects repeatedly!