Where is the rubber power of the table tennis racket marked, and how to choose the power of the tabl

The degree refers to the hardness of the rubber sponge, the higher the degree, the harder the hardness, and the red double happiness.

Hurricane (Tianji.

In addition, the hardness standard identification of different companies is different, such as 729 sets of rubber 45 degrees is about equivalent to the hardness of 38 degrees of double happiness. Although they are all Shore hardness.

But the probe is different, Shanghai is a needle probe so the hardness display reading is smaller, and Tianjin's probe is spherical, so the reading is larger, the general hardness number is marked on the sponge behind the rubber, there is a seal inside the place where the hardness number is specially filled, it is very obvious, but the jacket does not have a hardness to indicate that each rubber has a fixed hardness, and their hardness is generally soft. Well, if you don't understand anything about this question, you can ask it, and if you are satisfied, remember.

If you have other questions, click to ask me for help after this question, it is not easy to answer the question, please understand, thank you! (Bye-bye!)

The rubber power of the table tennis racket is marked on the sponge behind the rubber. There is a place for the hardness number to be filled in in the stamp, which is very obvious.

Crazy three straight forehand also up to 48 grams of weight, crazy three to fill glue, plus glue weight, 50 grams is very normal, if the backhand is full or transverse, one side will weigh more than 50 grams, straight plate will definitely not work, transverse board does not matter.

What to match with backhand glue depends on your bottom plate, how much budget is, and most importantly, it depends on the technical composition.

Generally, the backhand is mostly equipped with a jacket, these glues are soft and elastic, and the bite ball has speed, and the best one to use Dornick platinum jo is close to the people, whether it is twisted or bounced, it is very threatening, about 150 yuan.

Summary. 1.In order to ensure the offensive intensity of the near stage, the offensive athletes who mainly attack and smash generally choose a slightly heavier (more than 90g) and thicker (above) 7-layer bottom plate.

1.In order to ensure the strength of the offensive posture near the stage, the offensive athletes who mainly attack and smash in the Jimin Shed generally choose a 7-layer bottom plate that is slightly heavier (more than 90g) and more filial (above).

Table tennis amateurs, the cavity closure of the rubber degree contains the thickness of the oak Zhaoyi and the thickness of the sponge to understand the effect, in order to choose the right one for their own Wu Ru crack rubber. What is the power of the table tennis sleeve glue for? Generally speaking, the larger the degree, the greater the hardness, and the greater the hardness, the greater the elasticity.

If the hardness and elasticity are large, its strength is sufficient, but the control is weak. On the contrary, if the hardness is small, the elasticity will be relatively small, and it will be soft in strength, but much better in control.

However, for direct attackers on both sides, the base plate with the weight is relatively lighter because the back is also covered with sponge rubber. Pay attention to rotation, usually choose a reverse adhesive with good surface viscosity and slightly longer particles; Pay attention to the speed of the lead spring and choose a thick (millilocust potato) and a hard (45-48 degrees) sponge to match with it.

2.Athletes who combine attacking and cutting hail books, because they need to fully master the technology and be able to attack and defend, generally choose the weight, which is lighter (less than 90g), has a large board surface, and eats the ball deeply, but has a certain elasticity. If you pay attention to the rotation change, you usually choose a reverse adhesive with better surface viscosity and slightly longer particles; In order to ensure that the cutting ball is well controlled, Naisha often chooses a medium thickness sponge (and a soft and hard sponge (about 40 degrees) with Changxin.

The degree of the rubber of the table tennis racket usually refers to the hardness of the rubber, that is, the elasticity of the rubber, which is a term for table tennis rackets and sponges.

Table tennis racket rubber is divided into: reverse rubber, raw rubber, long rubber, and arc resistant rubber, and the performance and control of table tennis balls are not the same for each rubber.

Anti-rubbing: strong spin force, stable batting, easy to control, suitable for arc circle type or arc circle combined with fast attack type play.

Raw rubber: rubber with particles pointing upwards and a diameter greater than the height.

Long glue: This is a glue that is a thin and long rubber skin that is covered with a thin sponge and a rubber sponge.

Anti-arc rubber: There is also a kind of anti-rubber sponge rubber called "anti-arc rubber" specially to deal with the arc ball, this rubber paddle surface is non-sticky, the surface is smooth and slightly astringent, the speed of the ball is slow, the arc is shorter, and the sinking and fluttering after landing on the stage makes it difficult for the opponent to judge according to the convention, and it is especially effective for dealing with the arc ball.

The degree on the rubber of the table tennis ball represents the Shore hardness: the smaller the data, the softer, the common rubber power range is generally 35 45, and there are some extreme phenomena. Usually, the rubber elastic with high hardness is good but poorly controlled, that is, the force is strong and the rotation is weak, and the hardness is low.

The hard state grip index can only be experienced by people who have reached a certain level, and ordinary enthusiasts can choose to play about 40, so they don't have to care too much about this indicator.

Table tennis rubber degree refers to the hardness of the table tennis racket rubber, which is usually expressed by numbers. The higher the number, the harder the rubber and vice versa. The hardness of the rubber has an impact on both the control and speed of the racket, so it is important to choose the right rubber power.

The hardness of the rubber of the table tennis racket is determined by the sponge layer of the rubber. The thickness and hardness of the sponge layer will affect the ** and control performance of the rubber. Generally speaking, the thicker the sponge layer, the stronger the rubber and the faster the speed.

The thinner the sponge layer, the smaller the ** of the Yinsong rubber, and the slower the speed. However, a thick sponge layer can also affect the control performance, as the paddle is too elastic and it is difficult to control the direction and rotation of the ball.

When choosing a table tennis racket, you should choose the right rubber power according to your skill level and the needs of the game. For beginners, it is recommended to choose a racket with a lower rubber hardness, so that you can better grasp the control performance of the racket. For high-level players, they can choose different hardness of Fengtang Zheng rubber according to their own technical characteristics and competition needs.

In short, table tennis rubber power refers to the hardness of the table tennis racket rubber, and choosing the right rubber power can improve the control performance and speed of the racket, so as to better play their technical level. <>

According to your own physical condition, etc.

The choice of table tennis racket rubber is based on the condition of one's physical fitness, such as the size of the strength, the strength and weakness of the explosive power, the speed of the swing racket, etc. The second is to make a choice according to the characteristics of one's own play, such as liking to borrow force or liking to exert force, how good or bad the feeling of the ball is in the hand, whether the technical style is speed-based or spin-based, good at offense or defense, ingenious or bold type, like change or like simplicity, psychological quality ability, etc.

Precautions for table tennis:

1. Since it is in the stage of learning technology, the type of play is still uncertain, so you should choose a racket with light weight, good feel and low bounce rate, so as to master the ball control technique as soon as possible.

2. Children should choose a special racket suitable for the development level of children's strength and hand shape, in addition to the need for lighter weight, the more important thing is that the handle is thinner and thinner, which is conducive to helping them develop the habit of holding the racket correctly.

3. Children and beginners can choose a reverse rubber sponge with a thickness of millimeters and a hardness of about 40 degrees or a positive rubber sponge with a hardness of less than 35 degrees. In the early learning stage, children should try to choose conventional rackets such as reverse glue or positive glue, which is conducive to all-round learning of technology. <>

The degree of the table tennis ball rubber is an indication of the hardness of the sponge; From the perspective of hardness alone, the elasticity of the rubber itself cannot be expressed. Table Tennis World Magazine did an experiment and measured the hardness of a batch of old sets of rubber, in which Dark's blue V is the degree, which is equivalent to the butterfly's Sriver-L, and the gold V is 25 degrees, which is comparable to the butterfly's Sriver-G3 and lower than the bus and T05, and higher than the T05FX. It is estimated that the new Dack rubber is about 39 degrees in medium hardness and about 36 degrees in medium softness.

It is generally believed that the medium hard is closer to the feel of the national set, and the medium soft is closer to the feel of the Japanese set. If you're used to hurricane before, it's better to choose harder. If you want to try Japanese rubber sets, you can try the medium soft one.

Let's take a look at different hardness standards, medium soft = 43 Shore W 44 degrees = Shore A 38 degrees.

Medium = Shore W 45 46 degrees = Shore A 39 degrees.

Medium-hard = 46 degrees Shore W 47 degrees = 40 degrees Shore A.

For example, when using the hardness identification, Double Happiness uses Shore A to express it, and 729 uses Shore W, even if the 47-degree rubber of 729 and the 40-degree rubber of Double Happiness are the same in terms of theoretical hardness in measurement, but there are certain differences in the actual hitting feeling, which is mainly in the different processes of different manufacturers. The rubber 729 of the same hardness feels tough, Double Happiness feels hard, and the foreign rubber feels brittle.

Here we can also emphasize that these two kinds (the probe of the Shore hardness tester is different, Shanghai is a sharp needle probe (A), so the value is relatively small, and Tianjin 729 is measured with a spherical (W) probe, the value is naturally larger, which is why the same limb is a hardness of the rubber, with W and A to get two values.