Table tennis racket how to paste rubber for a detailed process

Items to prepare: special glue for table tennis, a glue rolling stick, a sharp knife, and one human resource (that is, yourself)!

Stick the new rubber on the new bottom plate: brush the new rubber sponge three times, brush the bottom plate twice, dry between each time, the drying time depends on the temperature of each place and the different glues used by individuals, the degree of drying, use the back of your hand to brush the bottom plate and the rubber, not wet and not too sticky!

The old base plate is glued with new rubber; The new rubber brush is three times, and the old bottom plate is brushed once!

The new base plate is glued with the old rubber; Two times for the new base plate and two times for the old rubber!

The above situation is a normal sticky shot, and friends who pour glue can completely ignore the above points and brush it at will, remember to buy more glue!

First: first glue the set of glue, glue on the bottom plate, wait for it to dry and glue, and then glue the set of glue to the bottom board, it's so simple!

Glue and bottom plate to brush glue, first brush glue on the sponge of the glue, remember to brush along one direction (such as from left to right), brush the glue evenly, and then brush the bottom plate, at the beginning, generally brush the glue three times, the bottom plate brush twice on it, must remember that the glue is dried and then brush the next glue, the dry boundary refers to the sponge with your hands, the bottom plate feels basically not sticky, so press the rubber on the bottom plate, with a glue stick (if not, You can use a cylindrical thing) to press evenly and forcefully back and forth on the rubber surface, and you're good to go!

Use special glue for table tennis, such as Haifu Blue Whale 2. The bottom plate is evenly coated with a layer and dried, and the rubber is evenly coated with a layer and then dried after drying. Bonded directly to the dry base plate. Roll one side with a roller (you can also replace it with an item such as a hairspray bottle).

Standard for drying: stick it with the back of your hand, and it will dry without sticking to your hands.

In addition, if you need more elasticity, you can apply a layer on the rubber. Apply a total of three times, each time be sure to dry before applying the next time, and the bottom plate only needs to be applied once.

Table tennis rackets, rubber, sponge selection.

Modern table tennis is fast, accurate, changing, spinning, etc. The size or strength of these factors, although mainly depends on the level of skill, is also closely related to the instrument. The history of the development of table tennis proves that the improvement of rackets directly promotes the change and development of technology.

To put it simply, a racket is made up of the following three parts:

1.Wooden paddle: It will produce different qualities of hardness and softness depending on the quality of the wood. The harder wooden ones are suitable for fast-break golfers, and the softer ones are suitable for curling balls and chippers.

2.Rubber: There are two kinds of positive stickers and reverse stickers (long glue is a kind of positive sticker).

3.Sponge: There are thick and thin, soft and hard.

Thick sponges will be faster than thin sponges. Due to the different feel of each person, when choosing the hardness of the sponge, it depends on the individual's feelings. Generally speaking, there are fewer users of sponges that are too hard, while younger golfers are more suitable for softer sponges as they can improve the feel of the hand when hitting the ball.

When choosing a table tennis racket, each person needs to decide which racket is suitable for them according to their own playing characteristics, especially the choice of rubber, the following is a brief introduction to the characteristics of three different performance rubber:

1.Sponge glue: Golfers who focus on speed will use this type of racket more often, especially the Chinese-style straight board attack is the most representative. This type of racket will have a slight downspin when it is hit, but it is not as strong as the reverse rubber in terms of pulling the ball and creating spin.

2.Reverse Paste Sponge Glue: Because the reverse paste rubber itself has large viscosity, strong friction, and easy to make rotation, there are many users of arc circle players; However, there are also some use of the reverse sticker fast attack, mainly to enhance the spin quality in serving and rubbing.

3.Long rubber: In general, this kind of rubber is not easy to actively create rotation, mainly relying on the different rotations of the incoming ball to produce opposite rotation, and the users are mainly players with changeable playing styles.

They usually convert rubber with different properties to hit the ball to increase the variation in spin, speed.

1. First of all, we will put the things we are going to use in front of us, the position that we can reach, table tennis rackets, two new pieces of rubber, special glue for table tennis, knives, rags, etc.

2. In order to save time, we can first brush one of the two new pieces of rubber with glue. Pay attention to be even when brushing. Wait until it is dry before brushing, a total of 2 or 3 times.

3. Next, we will tear off the old rubber on the table tennis racket, there will be a sponge under the rubber, which is more difficult to clean, we can use a knife to cut off along the edge, and use a knife to cut off the residue after tearing it off. After getting the forehand right, tear the rubber of the backhand.

4. Brush the wooden board with special glue for table tennis, brush it evenly, brush it again after drying, and balance filial piety 2 or 3 times. When brushing the glue, find that the remaining sponge is cleaned up in time, so as not to stick to the new rubber will be uneven and affect the use.

5. When waiting for the rubber and planks to dry, we can clean up the sponge debris to the point, and there is no debris for easy operation.

6. After the rubber and board are brushed 2 or 3 times and the glue is dry, I brush the board and the new rubber again, and press it once along the outer edge with my thumb. If there are some parts that can't be sticky when sticky, you can press it on it at noon, such as a water cup.

7. After that, glue another piece of rubber.

8. Because after brushing the glue many times, the rubber will swell, after the two new pieces of rubber are glued, we have to use scissors to cut along the outer edge, and try to carefully guide the manuscript when cutting, otherwise it will affect the appearance.

9. Finally, we wipe the rubber with a rag and remove the ash. Then put it in the case of the table tennis racket and you're done.

<>1. Prepare sponges, single rubber sheets, sponge blocks (for brushing inorganic glue), and glue sticks in the key slide.

2. Squeeze a little inorganic glue (about the size of a dollar coin) onto the rubber.

3. Brush evenly along a straight line with a sponge block.

4. Wait for the glue to dry. When the inorganic glue dries, it will be transparent and let it swim.

5. The sponge end is also coated with inorganic glue in the same way, and wait for it to dry.

6. In order to avoid mis-adhesion, cover a piece of plastic film (or white paper) on the rubber sheet, leaving only one bottom edge for alignment.

7. Align the bottom edge of the draft mountain with the sponge, and then pull out the plastic film.

8. Use a rubber rod to evenly paste the rubber and sponge together.

9. Then you can get a beautiful, flat and bubble-free assembly rubber with strong performance.