The all in one mobile phone is in the water, and if you don t take it for repair for a while, will t

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

If the water enters the mobile phone, it should be sent to the mobile phone repair station for ultrasonic cleaning as soon as possible.

If the battery is removable, remove the battery as soon as possible to reduce the corrosion of the internal components of the mobile phone caused by the electrolysis reaction of the liquid; At the same time, it can also avoid the occurrence of the phenomenon of inability to charge due to the short circuit of the circuit and the empty battery.

If it is not cleaned, the liquid will leave impurities attached to the components after the electrolysis reaction, and its electrical properties will be affected for a long time, such as leakage, poor contact, etc., and in serious cases, the components or motherboard wires will be corroded.

Unfortunately, if you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

The phone got into the water, and it wasn't broken at the time, so it proves that there is no big problem in the future, but don't use it as much as possible, and wait for a while, and then use it after the inside of the phone is dry.

Although I don't have any experience in this area, but I think if your mobile phone is not broken at the time, it is better to go to a professional mobile phone repair shop to check it, so that even if it is fine, it can be regarded as spending money to buy a rest assured, if there is something to pay attention to, the fault of the mobile phone can not be delayed, it will affect the service life and feel of the mobile phone, and the mobile phone in question can not be sold for a large price, so I suggest you still check it.

It is recommended to check it, although it can be used after entering the water, there may be dark diseases. Don't listen to those life tricks or anything, the safest way is to disassemble the machine and check whether there is water inside. Otherwise, there will be no problems now, and the cost of maintenance will be higher if there is a problem in the future.

The phone was flooded, it was not broken at the time, but it does not mean that it is completely not broken, he may need another hour or two, and he may not be able to use it in the future, because the water is immersed in the card of the mobile phone.

If the water is not broken at the time, it does not mean that it is fine, because the water in it can cause a short circuit in the mobile phone at any time.

If the water in the hand is not bad at that time, it can be used normally, it is recommended that you turn off the phone and dry it for half a day, and then the mobile phone If the water is not bad at that time, it can be used normally, I personally recommend that you turn off the machine and dry it for half a day, and then turn it on and use it, so as not to cause the motherboard to burn if there is water in it.

After the phone gets into the water, never use it immediately, and be sure to dry it thoroughly before using it. If you used it as usual at that time, and the phone still works, it means that the phone is not broken and should be fine.

If the phone gets into the water, although it is not broken at the time, then it should also be blown clean, otherwise, there will be water in it and it will corrode the parts inside.

The mobile phone is watery, many are fine at the time, and they cannot be used after the battery is damaged due to rust, and the mobile phone should be dried with a hair dryer in time.

If the mobile phone is adjusted to the water, it will shut down immediately, and the reason may be because of the internal short circuit, if it is a short circuit, it will burn out as the workers said, but the current ** generally does not have that kind of problem Mine ** has also been in the water before, take it out, and you can continue to use it after drying, and the degree of damage is not the same If it is dried, you can use it normally Instructions Your mobile phone has this kind of protection inside Once the water enters, it will automatically cut off the power Later, after turning on, I found that the flash frequency was because ** There is still some water in it, so there will be a short circuit after the power is turned on, if the degree is not large, there is no problem Now your ** inside should be completely dry, so it can be used normally, it is best to change the battery Don't use it with water. After the water enters, the worst will crash, and it can't be opened directly, but after the mobile phone enters the water, the first thing is to remove the back cover, take out the battery, SIM card, and TF card, if it is an all-in-one machine, you can force it to shut down (generally long press the power button for 10s), shake the water hard, and remember not to use the mobile phone at this time (that is, turn on) regardless of whether it is good or bad.

If there is not much water and there are no tools around, you can use a hair dryer (remember to use cold air) to blow back and forth on the mobile phone, without hot air, because hot air is easy to make water vapor enter the display screen and leave watermarks. Don't be in a hurry to turn on the phone after drying, you can place the phone on the windowsill or tuyere to dry for 7-8 hours, and be sure to wait for the water to dry completely before turning it on.

If there are tools around, dismantling and cleaning is the best choice, at this time, you must first unplug the touch screen, display screen, camera, on/off key, side button and other cable interfaces, remove the shield cover that can be removed, use toilet paper to absorb the visible water, and then use a hair dryer to dry, after the parts are dried, leave for 2-3 hours.

After confirming that the water is dry, you can assemble the parts, install the battery, test the machine, if the function is normal, you should pay attention to whether the mobile phone will be very hot or use for a short time during use, because the mobile phone with water is easy to leak and should be sent for repair in time.

It's hard to say, the mobile phone has just entered the water and is not damaged, it does not mean that it is fine, the water will slowly spread after entering the motherboard, and the power of the motherboard will cause the generation of electrolytes to corrode the circuit and damage the components.

It's best not to turn on the phone immediately if the water enters the motherboard or battery, then you start at the beginning, when the power is turned on, the inside will be all burned, wipe the water on the surface, shake it off, and put it in the rice after there is no water, or a dry and ventilated place, wait for a day or two, and then turn it on. If the water ingress is more serious, take it directly for repair, and the above method will not work for a long time.

The safety point will be turned off, and you will not use it for the time being.

The treatment method of water ingress into mobile phones is basically the same as that of general electronic products

Turn off to dry.

Make sure it's completely dry (or use a hair dryer) before turning it on.

Since the sealing of the shell of the mobile phone is better than that of general electronic products, there is a certain degree of waterproofness, if it is not in the water for a long time, there will generally be no problems).

The phone is immediately picked up after falling into the water for a few seconds, and it can generally be used normally. However, it is recommended that you deal with it as follows:

Shut down immediately. Send it to a professional mobile phone repair shop to disassemble the phone, motherboard, battery, and parts that are convenient for disassembly, baking, and drying.

It is completely dry and then installed and tested.

Generally, the screen is prone to water ripples when it enters the water, and it is difficult to completely dry the water in a short time, but the water traces will disappear slowly, so it can not be replaced for a short time, and it cannot be restored for a long time.

When the mobile phone is flooded, it is scattered and empty, so it is not turned on, and as long as it is dried inside, it can definitely be repaired.

In fact, I said that the clan I spent a lot of money did not have to be burned, so I had to repair it again. Because sometimes you have to change parts.

Some can really be repaired, you can dry the phone yourself, put it in the sun, put it in the apple or rice to cover it, it may really be good.

The phone has been put in water for a while, can it still be repaired? I think it can be repaired, Dou Hu turned on the phone, and then wiped the water dry the manuscript machine into the water for a while, can it still be repaired? I think it's good to fix the key car, turn on the phone, and wipe the water clean.

The mobile phone got into the water, can it be repaired after a period of time? After the phone gets into the water, although you put it in the repair shop for a while, let him dry it for you and then check whether the piece ** is not usable. See if it's worth changing, if it's not worth changing, get a new phone.

After the mobile phone enters the water first, we must quickly take a hair dryer to dry the water seepage in the mobile phone, and then try to open the mobile phone to see if it can be used normally, if you can't open the mobile phone, can not apply normally, then you must go to the repair shop for repair.

If the phone gets into the water, can it be repaired after a while? The mobile phone is flooded, and you use a hair dryer to dry the bark branches when you start the book, so you can see if you can use it? If you can't use Sun Zhuhong.

It should be fine depending on the situation, but it will still affect the use time, and it will be more likely to break down than before it was in water.

Generally speaking, it is like this.

Now, the sealing of many mobile phones is still very good, and if it falls into the water for a short time, it will not enter the water. In this case, if there was no problem at the time, there will be no problem in the future. Of course, you should still be careful when using your mobile phone.

Water on the phone may not be able to fix it.

Nowadays, many mobile phones are waterproof, and the impact of water is generally very small, and there is no need to repair it. However, some of them are not waterproof, and they will cause damage to the circuit board after water ingress, so they cannot be repaired.

Emergency treatment after water ingress on your phone:

1. Quickly cut off the power supply.

The phone is easy to break down after falling into the water and cannot be used because the water enters the phone and causes the internal components of the phone to short circuit, and if it is powered on and used again, it may cause the internal components to burn out or the battery**. Therefore, once the mobile phone gets water, you must quickly wipe the surface moisture with a paper towel, and then disconnect the power supply. If the battery is removable, remove it as soon as possible.

2. Disassemble the phone as much as possible.

In order to thoroughly dry and dry the water that enters the phone, disassemble the phone as much as possible. Such as SIM card, memory card, etc., these parts are all disassembled.

3. Suck up the water in the interface.

Interfaces such as the headphone jack and charging port are also the most susceptible places for mobile phones to be affected by water. It is recommended to use a fine cotton swab to carefully absorb the moisture at the interface. In addition, if there is a vacuum cleaner at home, it is an ideal tool to suck at each port for more than 5 minutes to remove as much water as possible.

4. Thoroughly remove the water from the imperial grip.

Rice has very good water absorption. Putting your phone in dry rice for at least 24 hours can completely remove the moisture from your phone. Of course, in addition to rice, other desiccants can also be used, but rice will be easier to clean, so it is recommended that you use rice, and the materials are easy to find.

5. Check whether the phone can be used.

If there is no water mist on the phone screen, it means that the water on the phone has been removed. At this time, put the battery back into the phone, restart it and see, under normal circumstances, after the above four steps, your phone can continue to use. <>