What should I do if my Mate30Pro falls into the water for half an hour?

What about half an hour? If it's an office, if it's not waterproof, the circuit board may be broken, so try not to play, put it in a rice bag, and use rice to absorb moisture.

1. Try to place the mobile phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of the mobile phone.

2. If the mobile phone is turned on, it is recommended to press the power button to turn it off; If the phone is turned off, it is recommended not to try to turn it on.

3. Take out the SIM card and microSD card as much as possible.

4. You can bring your phone to the Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

After the mobile phone is injected, there may be abnormal function, in order to reduce the loss, it is recommended to deal with it as follows:

1.If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

2.Remove the SIM card and memory card.

3.Try to place your phone in a dry and ventilated place, and use a paper towel to blot the liquid on the surface of your phone.

4.Take your phone to a nearby Huawei customer service center for maintenance as soon as possible to avoid unnecessary losses. If you don't have a backup of your data, there may be a risk of data loss when repairing.

Notes:1Do not move or shake your phone frequently after the liquid is ingested to avoid the spread of liquid inside the phone.

2.Mobile phones are made of delicate electronic components, and there is a hidden risk after liquid ingress, so it is recommended not to try to turn them on.

3.Do not blow with a hair dryer or bake at high temperature after liquid intake, so as to avoid the liquid being blown into the inside of the phone and the high temperature damaging the phone.

If the phone falls into the basin and gets into the water, it is best to pick it up immediately and turn it off immediately, whether it is bad or not, do not try to turn it on. You should find a hair dryer to blow on the phone, blow for about half an hour, blow a little longer if the cold wind blows, and not too hot if the wind blows hot, wait until you confirm that the inside of the phone is completely dry, and then try to turn it on. Be sure to confirm that it is dry and do not rush.

If you are in too much of a hurry, powering on may burn out the electronic components inside. After completing the above steps, if the phone can be turned on and normal, it is fine, if the phone cannot be turned on normally, it is recommended to go to the repair shop for repair.

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Hello, according to the inquiry, method 1: Please try to place the mobile phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of the mobile phone. If the phone is on, then press the power button to power off.

If your phone is turned off, don't try to turn it on. Then take out the SIM card and SD card, and immediately take your phone to the Huawei customer service center for testing and processing, so as not to cause unnecessary losses. Method 2:

Do not move or shake your phone frequently after water is ingested to prevent moisture from spreading inside your phone. We do not bake with a hair dryer or stove to avoid liquids being blown into the phone and the heat damaging the phone. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of delicate electronic components, and there is a hidden risk after water ingress, so don't try to turn it on.

Method 3: Remove the battery, wipe the phone clean, and then wrap the phone in newspaper to prevent the high temperature water vapor from entering the phone. Preheat the dry rice cooker liner and wait for it to be set to the keep warm before putting it into the phone, and drying it on the heat saving setting for a while can perfectly remove the moisture inside the phone without damaging the phone.

The above is the specific solution to what to do if the Huawei mate30 mobile phone falls into the water, I believe you will soon be able to learn how to operate through the introduction of the above content.

I hope the above answers are helpful to you!

Remove this phone from the water source as soon as possible. Then just wipe the surface with a dry towel with water. Then put it in a dry and ventilated place.

Remove your phone's SIM card or memory card to avoid unnecessary data loss. Do not turn on the machine, try to go to the after-sales inspection to avoid secondary damage.

Fish it out first, don't turn it on first, and put it in the rice pile for more than six hours, it shouldn't be too much of a problem. The Mate30Pro waterproof function is still okay.

mate30 supports IP68 waterproof, so take it out and put it in the meter and let it stand for 12 hours before taking it out, check whether the tail plug - earpiece - camera is fogged, whether the battery is bulging, whether the screen can be used normally, if it is greater than or equal to 2 problems, it is recommended to send it to the official after-sales service for testing, check the waterproof mark, and then carry out follow-up maintenance.

Have a great day

This must be dried to know whether your phone is still useful, you either stand the phone yourself, let it be tried for a few days, if you are in a hurry, it is best to go to the repair shop, let him help you disassemble and dry, so that faster, you don't disassemble the machine yourself, in case of a short circuit, it will be completely finished.

First go earn some money, then walk to the door of the mobile phone store and buy another one.

It can be broadly divided into three situations.

1) Drop into clean water when the power is on;

2) Falling into non-corrosive liquids in the event of a power failure;

3) Drop into non-clean water when energized, or corrosive liquid or viscous liquid or other clean liquid regardless of whether it is energized or not.

What if the phone falls into the water in these three situations? The first two cases have a good chance of being saved and there may be no sequelae, while the latter depends on luck. What to do if the mobile phone falls into the water, First, what to do if the mobile phone falls into the water when the power is on, this situation generally does not need to be disassembled.

1 Power off as soon as possible.

2 Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3 Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry. After these three steps of processing, the power supply can basically work normally.

2. In the case of power failure, the mobile phone falls into non-corrosive liquid. In this case, it can be assumed that the machine is not damaged. But maybe the LCD screen will be more ugly.

1 Shake dry vigorously, but don't shake the machine off.

2 If there is no trace on the LCD screen, treat it according to Article 3 of the first point.

3 If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not. This situation is the most troublesome. However, there is also a good chance that the machine will recover after proper treatment.

1 Power off as soon as possible.

2 If it falls into corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3 Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4 Clean with alcohol or professional washing water.

5 Assemble. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.

In short, what to do if the mobile phone falls into the water, don't panic, as long as it is handled properly, our mobile phones can be resurrected, if the situation is serious, go to the after-sales service to help repair it.

Wipe it dry and dry it in a cool place, never turn on the device or turn on the power, and then take it to Huawei's special maintenance center for testing and repair.

Personally, I think it's better to go to the Huawei service center as soon as possible to check.