What is the difference between an iron head billiard cue and a normal one?

The open ball room will prepare some clubs for everyone to use, which is called a male club. The rods sold are generally brand new before they have been used.

The open ball room will prepare some clubs for everyone to use, which is called a male club. The male rod is a mechanism rod, which is cheap and of average quality. The male rod is suitable for most people who usually play billiards casually. The rods sold are expensive and high-end, which varies from person to person.

The choice of billiard cues in the material, mainly divided into oak and maple, some people say ash, piano wood, these are different translations of ash, in ash, because the wood produced in different time zones, different export routes, so some people call ash, some people call piano wood.

The common characteristics of these two types of wood are: high density, good water retention and moderate elasticity.

The different characteristics are: there are many types of oak, there is more room for wood selection with different elasticity, the timber cycle is short, the material extraction rate is slightly higher than that of maple, and it is easier to air dry. But good color oak is hard to find.

1. Maple: moderate elasticity, long timber cycle, slightly lower material extraction rate, and long air-drying process, which is the reason why maple is more expensive. It is basically used in the production of 9 clubs. Maple clubs are a little easier to maintain than oak.

The appearance is generally straight wood grain, but sometimes with wrinkled texture, and the structure is coarse; Medium in weight, hardness and strength; Low flexural strength, toughness, seismic performance, and corrosion resistance; Medium durability with extremely high compressive strength.

According to this difference, anyone can choose the oak club that suits them, but maple clubs can not be used by everyone, because oak can be said to have all the feels, and maple basically has the same feel.

2. Oak: heavy and hard grain straight, coarse structure, elegant color and beautiful texture, high mechanical strength, wear resistance, but wood is not easy to dry, sawing and cutting.

Ashwood, tough and elastic, creamy white or slightly pinkish. It is easy to bend with the steam method, but it is easy to decay.

Billiard cues are made of ash, maple and oak.

1. Ash.

Ash wood is a very common billiard cue material, which has the characteristics of straight, soft, loose, easy to dry, light weight and not easy to deform. The fine grain of ash wood makes it possible to make a billiard cue with a very beautiful appearance. Ash wood is mainly used to make the shaft and head of billiard cues, and is one of the preferred materials for high-performance billiard cues.

2. Maple. Maple is a material with high hardness, which has the characteristics of high density, delicate grain, good elasticity and good durability. Billiard cues made of maple wood have good elasticity and control, which is suitable for more skilled players.

Maple wood is mainly used to make the shaft and head of billiard cues, which can provide a more stable and accurate shot.

3. Oak. Oak is a dense material with the characteristics of hardness, rough grain, and good durability. Oak billiard cues can be muffled to provide more hitting power and stability, but care needs to be taken to prevent cracking.

Oak is mainly used to make the shaft and head of billiard cues, and is one of the more common choices. Min Hood Hu.

How to choose a billiard cue:

1. Length selection.

The length of a billiard cue varies depending on the individual's height and habits. Generally speaking, the length of the billiard cue should be chosen so that the individual should stand about the table about and left from the table. If the length is too short, it may affect the stability and power of the shot; If the length is too long, it may affect the sensitivity and accuracy of the shot.

2. Weight selection.

The weight of a billiard cue also varies depending on personal habits and strength. In general, a lighter cue can provide better control and flexibility, and is suitable for players with better technique; A heavier cue can provide more strength and stability, making it suitable for beginners or power players.

3. Material selection.

The material of the pool cue has an impact on the sound, trajectory and feel of the ball. Common billiard cue materials are ash, maple, oak, etc. Billiard cues of different materials have different bridge characteristics, and you should choose a billiard cue that suits you according to your needs and habits.

You use an ordinary club to shrink the ball, how far can it shrink, with a professional club, the big difference is that the toughness of the club itself, the professional club has a good elasticity. The clubhead is also very different. The professional club is relatively thin and elastic, and there is no ordinary one, it is just an ordinary one that can cope with playing billiards. . .

1. The material is different, although most of the forelimbs are ash, but the position is different, and the performance is different.

2. The production process is different, a good club is made of several pieces of wood, which can increase the toughness and force transmission effect, and the ordinary one is a piece of wood.

3. Good clubs are handmade by famous craftsmen, and ordinary ones are made in batches.

Billiard cues: are batting tools made of high-quality wood. The club is thin at the front and thick at the back, it can be long or short, generally speaking, the club should not be shorter than 91cm

The club is too long and difficult to master, which can affect both aiming and hitting the ball, so choose the right club for you. The rod body is round, thin in the front and thick in the back, straight, the length is in between, and the diameter of the club head (thin end) is about 9 12mm.

Mainly oak and maple, others say ash, piano.

The material of the billiard cue:

The club, as a tool that every golfer must have, plays a particularly important role in playing.

First of all, choose a club that suits you. Many golfers choose clubs to consider several problems are completely wrong, for example, some golfers choose clubs first superstitious about a certain brand, then superstitious about a certain professional player, and then superstitious about a certain material. It's all meaningless, the only criterion for the quality of the club is whether it suits you.

The clubs used by beginners and experts are different. Beginners' requirements for clubs should be elastic and hard, and the weight is larger, so that beginners can easily cultivate more standardized movements when practicing and improve basic accuracy, because the hardness of slightly larger clubs is not easy to deform in the process of playing out, and there will be no unconscious rotation, so that the accuracy can be improved, as well as the concentration of exercise. And then have a certain foundation, when the beginning to a higher level, this kind of harder cue may not be suitable for these golfers, and then the higher the level of the month, the golfer is more and more reducing the number of strikes, the strength of the arm is reduced, and more use of the strength of the wrist to avoid the deformation of the action when the force is generated, affecting the accuracy, always hope to use a little force to send the cue ball out, with a reasonable strike point to get out of a more comfortable position.

Therefore, at this time, golfers should choose clubs that are more elastic, lighter, and most of them are chemically treated. It is also a relatively expensive club.

Extreme billiards answers you: Generally, the forelimbs are ash and maple, Canada, North America, are different. There are many varieties of wood, wenge, ebony, shadow wood, serpentine wood, and grimace wood. You can come to our store and buy it.

In the market, it is generally dominated by ash (ash) and Canadian maple.

Depending on whether you are a 9 or SNK 9 balls are generally maple and SNK is generally ash.

Mainly maple! Because the maple wood is hard, it is placed for a long time, and the baking is drier and not easy to bend and deform.

It is mainly divided into oak and maple.

Oak wood, heavy hard grain straight, coarse structure, light color and beautiful texture, high mechanical strength, wear resistance, but the wood is not easy to dry, sawing and cutting.

Ashwood, tough and elastic, creamy white or slightly pinkish. It is easy to bend with the steam method, but it is easy to decay.

The more expensive the club, the older the tree and the closer it is to the center of the tree.

The common ones in China are generally divided into maple and ash wood.

There are several kinds of wood, and I am using maple now, and I feel okay.