Which is better, instant heat type or heat preservation type water dispenser

Ready-to-heat water dispensers, of course.

1. Eliminate secondary pollution.

The instantaneous water dispenser uses the working principle of water's natural gravity and thermal expansion to completely isolate from the outside air, avoiding the invasion of bacteria and effectively preventing secondary pollution.

2. Energy saving. Traditional water dispensers normally need to consume electricity in a day, and products with poor thermal insulation performance will reach about degrees, while Qixi instant water dispensers consume only one degree, saving 50% compared with traditional water dispensers. According to the calculation of 80 million water dispensers in the country, if all are replaced with instant hot water dispensers, it will save 14 billion kilowatt hours of electricity for the country every year.

3. Instant heat. The instantaneous water dispenser can produce hot water in an average of 3-10 seconds, the amount of hot water in three minutes reaches more than 1000ml, and the hot water production capacity reaches 20L per hour, which is 30 times faster than the traditional water dispenser and more than 3 times larger than the hot water production capacity! The use of a rapid electric heating system virtually eliminates the deposition of stagnant water in the pipeline and minimizes the possibility of repeated heating.

The power of the heating element is greatly reduced, the thermal efficiency is higher, and the power is more efficient. The characteristics of instant heating and one-time heating overcomes the repeated heating phenomenon of traditional water dispensers and the phenomenon of "yin and yang water", effectively avoids the water quality of ordinary water dispensers due to repeated heating, and ensures that the nutrients in the water are not lost and the taste is better.

Fourth, security. The six safety protections of instant hot water dispenser ensure the safety and reliability of users in the process of use.

5. Comfort. The maximum hot water temperature of the instant hot water dispenser can reach 100 °C, which is nearly 12 times higher than the temperature of the traditional water dispenser, which is more in line with the drinking habits of Chinese consumers.

However, 1. The power of the instant heat type is much greater than that of the heat preservation type.

2. The water supply capacity of the thermal insulation type is much smaller than that of the instantaneous type.

Therefore, it doesn't matter if you use it at home, you can consider the power and the best of the day.

The common one is better than the instantaneous type.

The thermal type is better than the thermal type, that is, the thermal type does not destroy the water quality, the water molecules always make the active state, that is, the water molecules are always alive, the thermal insulation water molecules are always in a state of motion, the water molecules are too tired, and they lose part of their nutrients in the body.

I think the instant type is better, because the heat preservation type will heat up repeatedly, and the water will boil again and again, and I have read books that say that repeatedly boiling water is actually not good for health.

Instant heat is good.

The instantaneous water boiler can use a heating element with strong thermal conductivity to convert it into heat energy through electrical energy in the state of high power, and then transfer the heat to the water, and use the strong heat to heat the water quickly. When the water tank is full, the cold water tank is balanced with the boiling water tank, when heating, the boiling water temperature of the boiling water tank boils to the boiling point, the boiling water boils to the boiling water tank, and the water level of the boiling water tank is reduced at the same time, and the cold water tank automatically replenishes water, so that the cycle ensures that the one-time boiling fresh water is continuously provided, there is no raw water mixing, no need to keep warm and consume electricity, and it is 60% more energy-saving than the traditional water boiler.

The traditional water dispenser uses repeated heating, because it is boiled for too long, the water has a high content of non-volatile substances such as calcium, magnesium and other heavy metals and nitrite. The traditional water dispenser also consumes a lot of electricity, and the hot water will flow back to the water storage bucket during the heating process of the water dispenser, which will increase the temperature of the water storage barrel and cause unnecessary power consumption during refrigeration.

Precautions for the use of water dispensers.

1. The socket and power cord used by the water dispenser should meet the specified requirements, and it should be checked frequently, and repaired and replaced in time if damage is found to prevent accidents.

2. The water dispenser should be placed in a well-ventilated place, and there should be no flammable and explosive, heat source, fire source, corrosive gas or dusty place around.

3. When no one goes out, unplug the power plug of the water dispenser or turn off the power switch, which is safe and power-saving.

The basic characteristics of the filter-in-filter instantaneous water boiler are: cold water is superheated out, as long as the faucet is opened, the energy source will continue to supply hot water within a few seconds, and when the hot water is not used, the water heater will stop working when the faucet is closed. It takes a certain amount of time for the insulated filter water dispenser to boil, but there is no need to wait for the next drinking water.

If you want to drink a lot of water, you can choose a heat preservation type, and if you want to drink water urgently, you can choose an instant heating type.

Reasons why it is not recommended to use instant hot water dispensers: the water used in instant hot water dispensers is limited, the power of instant hot water dispensers is generally relatively large, and the water in the memory of instant water dispensers cannot exceed two days.

1. The water used in instantaneous water dispensers is restricted.

Because many friends reported that the instant hot water dispenser at home broke down after a period of use, and later found that they added tap water. In fact, if you look at the instructions on the instant hot water dispenser, there are clear requirements to add purified water or mineral water, which you must not be mistaken.

2. The power of instant hot water dispenser is generally relatively large.

Like some common instantaneous water dispensers, the power is basically between 2000 watts and 2500 watts. For 2000 watts to 2500 watts, generally speaking, square acres of copper wire are used. Therefore, when we use it in our family, we must ensure that there are no other high-power electrical appliances in this circuit at the same time.

3. The water in the instant hot water dispenser cannot be used for more than two days.

Generally speaking, we should try to use up the water in the instant hot water dispenser within one day, and then add new water the next day. This is to prevent the water from being left in it for a long time, which will lead to the production of bacteria, and it is also for the sake of our health, so such a requirement is put forward.

Water dispenser

A water dispenser is a device that heats or cools down bottled purified water so that people can drink it, and the bottled water is placed above the machine for use. From the perspective of function, the water dispenser is mainly divided into three types: warm, ice hot, and ice warm, which will provide water at different temperatures for people to drink, and the machine itself has the functions of cooling and cooling, or heating and heat preservation. There are also many styles of water dispensers, such as nozzle type, press type, etc.

Although drinking water is one of the most basic necessities of life, the exploration of drinking water has never stopped. From the kettle that relies on physics to boil the chirping kettle, to today's instantaneous water dispenser. Our expectations for water dispensers have also changed from simply boiling water to exquisite drinking water, and there are even water dispensers with their own tea making functions.

Just as a few years ago, when the hand-poured coffee was just half rammed, the rapid development of modern industry has even developed a coffee machine that can be automatically poured. As a "lazy cancer patient", although I am quite interested, I also feel that why should such a wonderful experience of focusing on one thing in a time be deprived by a machine?

So I specialize in the art industry, and I don't covet it to plug in too much, so the instant hot water dispenser just meets my expectations for the water dispenser.

So, I thought about the instant hot water dispenser.

Extremely simple. As a "designer's occupational disease", the appearance has always been the point I care about the most.

For a home product, it is simple and neutral enough, and it is suitable for many style scenes. His white plastic is soft and delicate, with his overall soft lines, his presence is a soft stone for a home environment, warm and quiet.

Although it is an electronic product, he does not employ hard lines to emphasize the sense of technology. The whole machine runs through a soft and just right curvature, which makes him stand out from similar products. In particular, his water tank has a frosted texture, transparent and not too strong, and the refraction of light after being loaded into water makes the whole machine smart.

As the name suggests, instant drinking water is instant heating, the water time is controlled within 3 seconds, through a heating pipe, the machine is heated to 100 °C from room temperature to instantaneous, realizing the ultra-high power boiling process. It can be seen that we cannot use normal faucet water and mineral water that exceeds the standard (most mineral water is OK), because there are a lot of minerals in this water source, and minerals will be more than 75 °C.

Instant hot water dispenser, it is better to use tap water. Because tap water is rich in minerals, the composition of the water is not destroyed. If you use pure water, the benefits outweigh the costs.

Bottled water is best.

Bottled purified water, less limescale, not easy to damage the heating element.

Of course, you can also use tap water, but it's just a little limescale.

You can also use water from a water purifier.

If you usually like to drink tea, or like to make some brewing water needs, you must be very particular about the water temperature, because each drink has its own suitable brewing temperature. Traditional kettles can only be heated to boiling water, and cold water cannot be brewed to the standard.

I belong to the people who must pay attention to the water temperature when soaking things, and I bought a vertical speed hot water dispenser a few days ago, which is so practical!

The Lisheng hot water dispenser has 7 levels of temperature control, including room temperature 45 55 65 75 85 99, which can heat up the water in 3 seconds without waiting for a long time, whether it is 65 health fruit tea, 75 beauty flower tea, or 99 green tea, it is easy to meet my personalized drinking needs.

4) The inlet water flow can be controlled by the inlet valve to achieve the purpose of assisting in adjusting the water temperature;

5) When the use is suspended in the middle, you can press "on" to close the circuit or directly close the water inlet valve, so that the machine enters the standby state;

6) If not in use for a long time, please turn off the power supply and water inlet valve.

Pure water and tap water are available for instant hot water dispensers, which are very convenient to use when they are turned on and heated when they are turned on.

The instant hot water dispenser uses pure water, which is relatively clean.

Purified water and mineral water, not tap water.

Nowadays, water dispensers are basically installed at home, which brings great convenience to life. Is the instant hot water dispenser any better? PChouse will take you to find out.

1. Instant hot water dispenser is relatively easy to use, it is a kind of hot water without waiting, that is, it is pressed and discharged, and it does not need to be heated repeatedly, which is different from the liquid family water dispenser.

2. The power of the instantaneous water heater is generally larger, and when it is used, it can be drunk with hot water as long as it is turned on for a few seconds, and it is really open and drink. Time-saving, easy-to-use, and extremely efficient.

3. And it has the function of energy saving and power saving. Traditional water dispensers boil water repeatedly and then boil it after it cools, which consumes a lot of power. The instant hot water dispenser is instant hot when drinking, does not heat when not drinking, and does not need the heat preservation function, which can save a lot of power supply.

Instantaneous water dispenser is a smart water dispenser that can heat water quickly, compared with traditional water dispensers, it has the following advantages:

Health: There is no need to heat and store drinking water repeatedly, which avoids the problem of water quality deterioration and nutrient loss, and maintains the freshness and taste of the water.

Convenient: Built-in rapid heating system, heating only when you want to use it, one-time heating, heating power is greatly improved, and the water output speed is fast.

Energy saving: There is no need for long-term insulation, and liquid dissipated electricity is only consumed when the water is discharged, saving electricity expenses.

Flexible: Multi-level temperature and water volume adjustment, you can choose the right temperature and water volume according to different needs, suitable for a variety of brewing methods.

Of course, instantaneous water dispensers also have some drawbacks:

Do not boil the water. Even if it is marked at 100 degrees, it does not actually boil, so it is necessary to add purified water or purified direct drinking water.

The amount of water produced is relatively small. Because the water is heated at the same time, the water output is slower than that of traditional water dispensers, and it may not be convenient if you need a large amount of water.

If the tank is not large, it may need to be refilled frequently. Some mini instant hot water dispensers are more suitable for desktop or room use, and if you are the main water dispenser in the family, you may need to replenish the water frequently.

Instantaneous water dispensers are basically harmless, because the cold water and hot water of instantaneous water dispensers are always separated, and the instant hot water dispenser has no inner tank, and the water inside will be in a flowing state, which is not easy to produce scale. And the instantaneous water dispenser is more user-friendly than the ordinary water dispenser, when the water dispenser runs out of water, it will automatically stop working and send out an alarm.

There is no harm in i.e. hot water dispensers.

That is, there is no harm in the hot water dispenser, its working principle is to use the control module to control the water pump to work, and connect the heating power supply of the heater while continuously adding cold water to the heater, and the cold water is quickly heated in the process of passing through the heater, so as to flow out hot water.

Instant hot water dispenser is different from ordinary water dispensers, its cold water and hot water are always separated, and there will be no mixing of hot water and cold water. In addition, the instantaneous water dispenser does not have an inner tank, and the cold water will always be heated in a flowing state, so this kind of water dispenser is not easy to precipitate and produce scale.

At present, there are still some instant hot water dispensers that are controlled by microcomputers, and their functional design is more humanized. For example, there is a built-in water storage tank into which mineral water can be poured and heated. In the event that there is no water in the tank, the instant hot water dispenser stops working and sounds an alarm.

At the same time, the amount of water output and water temperature can be set to meet the needs of each person.