How to distinguish the appearance of an electric guitar from a single rock, a double rock, a small d

Single and double shakes, mainly depending on the bridge.

A single shake can only press down on the knob to make the string tone fall by semitone, whole tone, or two or three whole tones.

In addition to pressing down on the handle, the double shaker can also be lifted upwards to raise the string tone by semitone, whole tone, or two or three whole tones.

If the bridge is fixed, you can't use a crank, as is the case with many Gibson's pianos. But the resonance of the fixed bridge is the best, and the sustain is longer. So, each has its own benefits.

The double shake is not particularly ruined, the key depends on what the bridge is, for example, IBANEZ generally uses Floyed bridge, the double shake effect is very good, and the strings are rarely run. I've been using the RG350DX for over three years and the dual shake system is still very good.

The choice of pickups is to your own liking, there is no fixed pattern. If you want to play the lead and prefer a sharp, bright and crisp tone, then the standard single pickup of the Fender ST is the best fit.

If you want to play heavy** and like a calm, punchy, explosive tone, then the Gibson LP standard double double pickups are the way to go.

If you want to play a little bit about everything, aren't very picky about the tone, and have a good case to match, then the double and double pickups will definitely meet your requirements.

Also pay attention to the brands of pickups, such as EMG, Seymour Duncan, Gibson, Fender, Dimarzio, Kent Armstrong, Bartolini, Lindy Franlin, Chris Kinman, Bill Lawrence and many more. Everyone prefers EMG and Duncan, which are first-class for playing metal.

First, the role is different:

1. With a crank to raise the crank, the string tone is raised by a semitone, a whole tone or two or three whole tones. The tone of the piano with a crank is very hard. After adding effect distortion. The tone style is sharper.

2. No shake down to press down on the crank, the string tone descends semitone, whole tone or two or three whole tones. The no-shake style is a bit more extensive. A single piano like the Fender is generally very popular with some beginners in China. Because the shape is soft and the tone is sweet.

Ersen Dou, Descending:

Descending, with no shaking; Rise, with a crank band. The key with a rocker is not particularly ruined, the key depends on what kind of bridge, for example, IBANEZ generally uses a floyed bridge, and the effect with a rocker is very good, and the strings are rarely run.

3. Vibrato system.

A tremolo system with a crank usually consists of two parts: a neck lock and a bridge vibrato system. In addition to the blind bridge with a crank, there are three types of structures: a rockless bridge, a fixed bridge, and a piercing bridge. In addition to pressing down on the rocker, you can also lift the rocker upwards to raise or lower the string tone by semitone, whole tone or two or three whole tones.

Double shake and single shake refer to the vibrato system of the electric guitar, that is, the metal rod and the series of vibrato systems on the body of the piano in the eyes of outsiders. And the double shake is able to lift up and down, this kind of piano is generally difficult to debug, to tune into the standard tone needs to come several times, if it is a high-grade goods can also, after all, after tuning not much to run the sound, but if it is a low-grade goods, it will be troublesome, three days and two ends need to tune the strings. The vibrato system is generally installed at the tail of the electric guitar. Beginners are advised not to use electric guitars with a vibrato system.

Using a vibrato system requires mastering the crank technique, which will make the tone more gorgeous, but there are also guitar masters (such as slash, ozzy, etc.) who don't use the vibrato system, depending on how you like to play.

About effects and speakers,This can't give you a definitive conclusion,It mainly depends on what style you like,The more high-end the timbre, the better,I think beginners don't need to pursue the excellence of the timbre to practice their skills,Buy a low-grade one.,When you have a direction for the effect and timbre, then change the equipment purposefully.。

A single-shake handle can only loosen the strings, while a double-shake can move the strings in both directions, either loosening or tightening.

Single-shake electric guitar: The bridge is at the bottom of the body.

Dual-crank electric guitar: The bridge is in the middle of the body.

There are a few differences between an electric guitar double shake and a single shake:

1) Double shake up the crank, the string tone rises to 100 high semitones, whole tones or two or three whole tones. Whereas a single shake is pressed down on the crank, the string tone is reduced by semitones, whole tones, or two or three whole tones.

b) The single shaker can only be pressed down on the shaker. In addition to pressing down on the rocker, the double shaker can also lift the rocker upward.

c) Descending, with a single shake; For the rising tone, double shake is used.

There are a few differences between an electric guitar double shake and a single shake:

1) Double crank up and raise the crank, and the string tone is raised by a semitone, a whole tone, or two or three whole tones. Whereas a single shake is pressed down on the crank, the string tone is reduced by semitones, whole tones, or two or three whole tones.

b) The single shaker can only be pressed down on the shaker. In addition to pressing down on the rocker, the double shaker can also lift the shaker upward.

c) Descending, with a single shake; For the rising tone, double shake is used.

There are a few differences between an electric guitar double shake and a single shake:

1) Double crank up and raise the crank, and the string tone is raised by a semitone, a whole tone, or two or three whole tones. Whereas a single shake is pressed down on the crank, the string tone is reduced by semitones, whole tones, or two or three whole tones.

b) The single shaker can only be pressed down on the shaker. In addition to pressing down on the rocker, the double shaker can also lift the shaker upward.

c) Descending, with a single shake; For the rising tone, double shake is used.

There are a few differences between an electric guitar double shake and a single shake:

1) Double crank up and raise the crank, and the string tone is raised by a semitone, a whole tone, or two or three whole tones. Whereas a single shake is pressed down on the crank, the string tone is reduced by semitones, whole tones, or two or three whole tones.

b) The single shaker can only be pressed down on the shaker. In addition to pressing down on the rocker, the double shaker can also lift the shaker upward.

c) Descending, with a single shake; For the rising tone, double shake is used.