Is there a difference between international quality certification and quality system certification?

First of all, a concept, certification can be divided into two categories: management system certification and product certification, management system certification refers to the company's management to meet the requirements of the standard (such as ISO9001:2008), product certification refers to the company's products meet the requirements of the standard (ISO IEC 15408:2005).

These are two different concepts, which must be clearly distinguished, especially the requirements in the publicity must be clear and unambiguous, and consumers must not be misled.

ISO9001:2008 is a standard for quality management system certification, through ISO9001:2008 certification only shows that the company's quality management meets the requirements of the standard, not that the company's products meet the requirements of the standard, so it can only be advertised in the outer packaging (not on the specific product) to show that the company meets the requirements of ISO9001:

The requirements of 2008 can generally be said to be "ISO9001:2008 quality management system certification" or "ISO9001:2008 management system certification", but because the company likes to exaggerate or worship the ocean for publicity reasons, they like to say "ISO9001:".

2008 International Quality Management System Certification" or "ISO9001:2008 International Quality System Certification", it can be allowed to say that there are two reasons: one is the international standard of the standard; The second (and most important) is ISO9001:

The 2008 certification is an international mutual recognition, that is, the international recognition of the ISO9001:2008 certificate issued by China. Of course, international mutual recognition is conditional, and for companies, as long as the certification body is accredited by the China National Accreditation Service for Conformity Assessment (CNAS).

In addition, the system certification can not be said to obtain "quality certification" or "international quality certification", that is the product certification, only product certification can be said to obtain"xx standard quality certification".

Hope it helps.

Personally, I don't think there is a difference, did you offend the quality supervision department somewhere else?

This ISO9001 is not a product certification, it is the company's management system.

The company has passed ISO9001:2008 quality management system certification or the company has passed ISO9001 quality management system certification.

International 2 words can be added or not. I've never seen a ...... that said that this can also be punishedIf your product is not within the scope of your ISO9001 certification, it is not allowed.

As soon as you see the problem, in strict accordance with the regulations, the standards printed on your certified goods must be exactly the same as those on the issued certificates. Although there is no difference between the international quality certification and the quality system certification you said, this is a regulation, and not a word can be wrong.

The duration of the recertification on-site audit is the same as the time required for the initial certification Phase 2 on-site audit.

ISO9001 quality system certification.

The difference between ISO management system recertification and initial certification is that there is no one-stage audit for recertification, only two-stage, unless there is a significant change in the management system or operating environment of the certified organization; During the initial certification, only the operation of the auditee from the operation of the system to the on-site audit date needs to be considered, and the recertification conclusion should be made based on the system evaluation results during the certification cycle during the recertification on-site audit.

It's the same, except that some people omit it when typing.

The English word certification is baicertification, and its original meaning du refers to an action to issue certification documents. Daoiso IEC Guideline 2-1991

The general terminology and content of standardized and internal related activities.

Definition defines "certification" as: "a procedure by which a third party gives written assurance that a product, process or service meets the specified requirements". The main points of this definition can be summarized as follows:

l) the object of certification is a product, process or service; (2) Standards are the basis of certification; (3) Appraisal methods include quality sampling, quality system audit and evaluation; (4) The proof of certification includes certification certificate and certification mark; (5) Certification is an activity carried out by a third party.

Certifications include product quality certification and quality system certification (ISO9001).

ISO IEC Guideline 2 defines it as: "The procedure for a third party to provide written assurance that a product meets the specified requirements". The Regulations of the People's Republic of China on the Administration of Product Quality Certification uses more popular language to define product quality certification as:

Activities in which a certification body confirms and issues a certificate and a certification mark to prove that a product meets the corresponding standards and relevant technical requirements in accordance with product standards and related technical requirements".

1. The certification is different from the complex, the object of the quality system certification is the organization, and the product quality certification object of the product zhi (this dao is two completely different concepts, people often make some common sense mistakes when they don't know it before, such as the outer packaging is printed with "my company has passed the CCC compulsory certification" or "the product has passed the ISO9001 certification" and so on);

2. The standards applied in the certification are different, the standards applied in the quality system certification are only a few, and the standards applied in the product quality certification are thousands;

3. The focus of certification is also different, the general quality system certification focuses on the organization's ability to provide qualified products to customers continuously and stably, which is a comprehensive reflection of all aspects, while product quality certification focuses on whether the product meets the standard requirements, and it is not allowed to produce and sell if it is not met.

4. The process of certification is also different, the general quality system certification does not need to carry out the type test of the product, and the product type test in the process of product quality certification is an indispensable link, only the type test is qualified, and the follow-up certification content will be carried out. Wait a minute.

Answer: In short, the quality system certification is the production process of the whole product, including raw materials, semi-finished products, parts, finished products, packaging, handling, storage, etc., all of which are specified in the program documents, and the installation of the program documents is carried out, and the program documents are in line with the provisions of the program documents, which are in line with the quality management system.

Product certification: test the products you produce to test whether their indicators meet the relevant national standards. (In product certification, there is a factory inspection, but also to look at the production process and the raw materials used, etc.).

The quality certification of the product is included in the quality body.

Within the system certification, there are many different emphases from the quality system. Product certification is only for a certain type of product audit, and the focus is on whether the identification management of the product meets the scope requirements to verify, mainly to review the quality of the product to be certified; Quality system certification, on the other hand, is a review of processes across the organization to confirm the organization's ability to ensure product quality, not for a specific product. In fact, there are many similarities between the two in the audit process, and the specific audit rules need to be checked.

Quality certification refers to ISO, which refers to whether the operating process of the entire factory is standardized. Product quality certification is for the verification of product conformity.

The object of quality management system certification is the quality management system, that is, the quality management and quality assurance capabilities of the enterprise. It is based on relevant national standards (e.g. GB T9001) that are equivalent to the ISO9000 family of standards. Its function is to improve the customer's trust in the supplier, reduce the customer's inspection and evaluation of the supplier, and help the customer choose a qualified supplier.

Quality management system certification is voluntary, the system certification certificate obtained by the enterprise through the system certification can not be used in the production of products, but can be used for correct publicity, it is one of the certification systems recommended by ISO to various countries. Product quality certification is to do the type test of the product, and the quality management system of the supplier related to the product is evaluated, including the quality management system of the supplier can be properly controlled over its production, equipment, material procurement, inspection methods, etc., and whether the product can always meet the technical specifications. After passing the product quality certification, not only the certification certificate is issued, but also the use of the certification mark on the product is also allowed.

The main difference between quality management system certification and product quality certification is that the objects of certification are different. The object of product quality certification is a specific product, while the object of quality management system certification is the quality management system of the supplier organization. Due to the different certification objects, a series of differences have been caused by a series of differences in the approved certification conditions, certification methods, and the use of certificates.

But they also have something in common, that is, they all require a systematic audit of the quality management system of the supplier organization.

Quality management system certification has the advantage of covering a wide range, but the external impact is not as good as product quality certification. Product quality certification can directly make the mark on the packaging of the product, which has the advantage of having a large impact. However, it also has great limitations and can only be used on a specific product.

There are pros and cons to both. When enterprises choose which way to use certification, they should choose carefully according to their own situation and customer requirements, and do not think that the quality management system certification has a large scope, high level and good reputation, while the level of product quality certification is low. We must not blindly listen to the misleading of some illegal certification bodies, and enterprises must have a clear awareness of this.

Quality management system requirements and product requirements.

The GB T19000 family of standards distinguishes between quality management system requirements and product requirements.

GB T19001 specifies the requirements for a quality management system. The requirements for a quality management system are generic and apply to all industries or sectors of the economy, regardless of the category of products offered. GB T19001 itself does not specify product requirements.

Product requirements may be prescribed by the customer, or by the organization through the customer's requirements, or by regulations. Product requirements are sometimes included in the context of such as, technical specifications, product standards, process standards, contractual agreements, and regulatory requirements, together with relevant process requirements.

Quality system certification, also known as quality system evaluation and registration. This refers to the inspection team composed of qualified auditors sent by an authoritative, impartial certification body with independent third-party legal personality (recognized and authorized by the national management agency) to inspect and evaluate the quality assurance ability of the applicant's quality system according to the three quality assurance model standards, and to award a certificate of conformity and register all activities for Buxiang who meets the requirements of the standard.

Certification stage: the application and evaluation stage of certification, its main task is to accept and accept the application of the supplier quality system to inspect and evaluate, decide whether to approve the certification and type to register, and issue a certificate of conformity; The purpose of the daily supervision and management stage of the approved supplier's quality system is to make the approved supplier's quality system continue to meet the requirements of the corresponding quality system standards during the validity period of the certification.

The following conditions need to be met when ISO9001 certification: 1. Chinese enterprises are issued by the administrative department for industry and commerce"Business license of enterprise legal person"；The foreign enterprise holds a certificate of registration with the relevant ministry training institution. 2. The product quality is stable and can be mass-produced normally.

Stable quality means that the product has been continuously inspected for more than one year. Products produced in small batches cannot represent the stability of product quality, and enterprises that produce products in batches must be eligible to apply for certification. 3. The product conforms to national standards, industry standards and their supplementary technical requirements, or meets the standards confirmed by the competent administrative department of standardization.

The air-side standard mentioned here refers to the national bucket rubber standard or industry standard with international level. Whether the product meets the standard shall be confirmed and approved by the inspection agency confirmed and approved by the State Bureau of Quality and Technical Supervision to conduct sampling to prove. 4. The quality system established by the manufacturer meets the requirements of the quality assurance standards in the GB T19000-ISO9000 family.

Establish an applicable quality standard system (generally ISO9002 is selected to establish a quality system) and make it operate effectively.