The network cable connection router is 100 megabytes, and it is 50 trillion when directly plugged in

The network speed of the connection route is slowed down because the Access mode is incorrectly set.

1. In the case of ensuring the normal access of the router, set the "access mode" of the router correctly. The network operator provides the required information for the specific access method.

2. Next, open the "Run" dialog box on one of the computers connected to the router (press Win+R to open), and enter cmd to enter the MSDOS interface.

3. Enter the command "ipconfig" in its window to get the IP address of the default gateway, i.e. router.

5. If you find that there is packet loss, it is recommended to replace the network cable between the computer and the router. Even if you cannot ping, you need to enable DHCP on the router.

6. Turn on DHCP service on the router: In the "Advanced Settings" tab, click "DHCP Server" and check the "Enable DHCP Service" item. At the same time, the computer must set the IP acquisition method to "Automatically obtain IP address".

9. When there is a "network timeout" prompt, it means that the network line is interfered by the line, or the network signal is unstable, which can only be solved by contacting the service personnel of the network operator.

10. If no data packets are received at all, it means that the IP address of the computer is not registered when the router uses static IP binding. Solution: On the DHCP Client page of the Advanced Settings tab, add the IP and MAC address pairs of the machine.

My computer is in the same situation as yours. Ask for a high finger point.

What happens when a 1000 megabyte router connects to a bedroom network cable with only 100 megabytes?

In this case, it first depends on whether your 1000 megabyte router is set up correctly. Under normal circumstances, the broadband at home is 1000 megabits, and the network speed is only 100 megabits, at this time you must modify this option of the computer to make your computer network speed increase rapidly.

First, enter the win+r keys on your computer

Pop up the run box, enter this line of letters in it, and press Enter

In the local Group Policy that pops up, select Windows Settings, and then find Policy-Based QoS on the right

Right-click and select Advanced Settings to change the level inside to the highest level 3

Finally, click OK

Then restart your computer, and you'll notice an instant increase in internet speed.

But if you find that the network speed at home is only 100 megabytes, then you need to check your computer's network card to see if it supports 1000 megabit network card.

Right-click on this PC, select Properties, find Device Manager in it, find Network Adapters, and double-click to open it

Find Advanced, find Speed and Duplex in Properties

Look inside on the right to see if there is an option for 1Gbps, if there is, it means that your computer is a Gigabit network card

If not, it means that your network card is a 100 Gigabit network card, and you need to replace the network card again to achieve the speed of the Gigabit network card.

Finally, we also need to check whether the optical modem, router and network cable of the broadband at home also support Gigabit, and if one of these supporting devices is not up to standard, the network speed is also not up to standard. If the broadband at home is not up to standard, check the above devices as soon as possible.

100 Gigabit broadband can be used with old-fashioned routers, Gigabit routers, or 100 Gigabit routers.

Routers are divided into local routers and remote routers, and local routers are used to connect network transmission media, such as optical fiber, coaxial cable, and twisted pair; The remote router is used to connect the remote transmission medium, and requires the corresponding equipment, such as the ** line to be equipped with a modem, and the wireless to be through the wireless receiver and transmitter.

The router must meet the conditions: Recently, telecom seems to have launched 100 megabytes of broadband, and it is necessary to think of reaching this speed (theoretically, practically,At the very least, you need to buy a router of more than 300m, both wired and wireless, and it is best to reach 1000 megabytes of network equipment. Why is that?

Why should you choose such a router?: Because the speed of the router is lost, it is recommended that the computer at home is also a 1000 megabyte network card (wired and wireless) to meet the above bandwidth.

Router purchase recommendation: Brands like TP-Link D-Link H3C Netgear have better routers.

TP-Link TL-WDR7500 1750M 11ac Dual-Band Gigabit Wireless Router

TP-Link TL-WDR4310 750M Dual-Band Gigabit Wireless Router

TP-Link TL-WDR3310 600M Dual-Band Gigabit Wireless Router

TP-Link TL-WR1041N 300M Wireless Gigabit Router.

These are all WAN、LAN port full gigabit wireless routers,The wireless speed is different,You can find it on Jingdong。

A little common sense:

Generally, the 100 megabits mentioned in broadband refer to bits, and ** is calculated by bytes, so 100 megabits correspond to the **speed of 12m bytes. If your speed reaches 30 megabytes per second, you're using 300 megabits of bandwidth efficiently. Some cell broadband does not have a speed limit, and the fiber speed may be greater than the 100 megabits you prescribed.

No. In a gigabit broadband network environment, it is necessary to use a Gigabit router. In a gigabit broadband network environment, in addition to using a gigabit router, you must also use a gigabit network cable, otherwise the network speed will be automatically limited to 100m.

When buying a router, you need to pay attention to the fact that after actual testing, the router you buy must have stable and reliable equipment, low network latency, fast network speed, and strong WiFi coverage.

We must first understand the process of network speed transmission: the optical modem is still a gigabit network, and the switch (often called a router in life) is also a gigabit, but there is one thing we must pay special attention to, that is, the wired network of the router, the WAN port and the LAN port must support Gigabit, otherwise after the switch is converted, it will be connected to the LAN port, and there will be a 100 Gigabit broadband phenomenon.

In addition to the LAN port output of the router may be 100 megabits, there is also the limitation of our computer itself, poor configuration or computer card, even if the network speed is good, it is not because the computer affects the network speed, but the computer itself has poor computing power. Therefore, the reason for the slowdown of the network speed is that the computer configuration also has a certain impact.

In addition, under normal circumstances, the transmission signal capability between the wireless router is stronger, much better than the signal ability of the notebook and the wireless router, so the direct transmission ability between the optical modem and the switch must be stronger than that of the switch and the computer, and the signal is better.

Finally, network transmission is a typical barrel principle, and the minimum bandwidth determines our overall networking bandwidth, so we must ensure that our network is smooth and efficient from all aspects.

How do you know for sure it's a Gigabit LAN?

Are you wired or wireless?

Have you tried the test of changing the Gigabit network card?

You can directly connect the computer to the optical modem to try it, if it is still 100 megabits, it means that it is a network card problem.