What is the difference between a wireless router 600 megabyte and a 300 megabit is not big

The main difference is the bandwidth of wireless data transmission, wireless Internet access can not be felt, the network speed of China's operators is far lower than 54mbps, I have a fiber optic cable here is also 20-30, so, if you just wireless Internet access, the three specifications can not be felt, but if you have multiple wireless access devices, there is a difference between each other LAN file transmission, 300 is of course much higher than the first two, but this is the need for wireless connection equipment compatibility, wireless network card is also 300, In order to connect the route of 300 at full speed, if your network card is only 54, the route is 300, then you still only have 54, and vice versa, these are the theoretical values of the best signal, farther, the signal is almost a little bit of the network card will automatically reduce the rate of access to infinity, through the wall and the wireless network access speed is not necessarily related, the relationship lies in the transmission power of the router and its antenna, the route with high wireless speed is generally good because their antenna power is not low, and there are at least 2 antennas, However, if the 54 product is replaced with a high-power transmitting antenna, and the third-party firmware is brushed, and its transmitting power is increased, it will never lose to the 300 product in terms of penetrating the wall, but it is actually enough, and the room can be covered on the line, and there is no need to pursue a full grid signal everywhere, and the radiation is too big and meaningless.

Wireless routers.

600M is twice as large as the bandwidth of 300M, which means that it can reach a rate of 75MB (600 8) per second, while the rate of a router of 300 per second is half smaller, but in actual use, due to the limitation of the maximum bandwidth currently provided by network operators, the practical effect is not much different.

A wireless router is a router that is used for users to surf the Internet and has a wireless coverage function. A wireless router can be seen as a device that sends broadband network signals from the wall of your home to nearby wireless network devices (laptops, Wi-Fi-enabled mobile phones, tablets, and all Wi-Fi enabled devices) through the antenna. The bandwidth of the wireless router 600m is twice as large as that of 300m, which means that the rate of 75mb (600 8) per second can be reached, while the rate of the router of 300 per second is half smaller, but in actual use, due to the limitation of the maximum bandwidth currently provided by network operators, the practical effect is not much different.

1. The difference in wireless transmission speed.

Gigabit routers are dual-band networks, i.e., wifi in the frequency band and 5G band, with a maximum wireless rate of 1167Mbps. A 300 Gigabit router usually only supports WiFi in the frequency band, and the maximum wireless rate is lower than that of a Gigabit router.

2. Differences in transmission coverage.

Compared with 300 Gigabit routers, Gigabit routers have a wider signal coverage and a longer transmission distance.

3. The difference between CPU and chip.

Gigabit routers' CPUs and chips have gigabit data processing power, which is powerful and has excellent performance. Since 300 Gigabit routers have lower requirements for CPU data processing power, slightly lower-end chips are often used to save costs.

If the broadband at home is 300M, when buying a wireless router, you need to choose a gigabit version of the wireless router, the gigabit version of the wireless router, which means that the WAN port and LAN port of the wireless router support 1000M transmission speed.

At present, there are a lot of wireless routers on the market, and their WAN port and LAN port only support a maximum transmission speed of 100M, if you choose such a wireless router, then 300M broadband, at most can only use 100M network speed, now there are more and more routers that can support 300 broadband, but the cheapest ones are relatively few, and generally need to be more than 300 yuan.

When buying this gigabit router, you must see two very key parameters, gigabit wan lan interface and support5G band protocol, if there are no these two parameters, it cannot be called real gigabit routing, about the brand of the router, it is recommended to choose some big brands, good stability, such as TP-link, Huawei, Xiaomi, etc.

The wider the frequency band, the faster the transmission speed. 1200m is 4 times that of 300m, and the transmission speed and the amount of information transmitted are a lot.

The Mega wireless router is a dual-band wireless transmitter, with 2 WiFi, one and one 5G WiFi, the maximum rate of WiFi is 300M, the maximum rate of 5G is 866M, and the maximum rate of 1200M is added up.

Mega wireless router is a single-band wireless transmitter, there is only one wifi, and the maximum transmission rate is 300m, because the transmission rate is too low, the current single-band wifi router has been eliminated.

Summary. Is it okay to use a 3000 megabyte router for telecom 300 megabyte broadband, how big a router is generally used, hello! First of all, let's be clear, it must be able to move, the 3000 megabyte router is the ax protocol, generally 80MHz bandwidth, it is easy to run full 300 megabyte broadband, under laboratory conditions, the same router reaches 2000 megabyte transmission rate is no problem, so don't worry.

In addition, I think that it is more important to consider if the coverage is larger than whether it can be moved. Hope it helps!

Is it okay to use a 3000 megabyte router for telecom 300 megabyte broadband, and how big a router is generally used.

Is it okay to use a 3000 megabyte router for telecom 300 megabyte broadband, how big a router is generally used, hello! First of all, let's be clear, it must be able to move, the 3000 megabyte router is the ax protocol, generally 80MHz bandwidth, it is easy to run full 300 megabyte broadband, under laboratory conditions, the same router reaches 2000 megabyte transmission rate is no problem, so don't worry. In addition, I think that it is more important to consider if the coverage is larger than whether it can be moved.

Hope it helps!

Hello, dear, thank you for your patience, the answer has been found for you, you check it, thank you!

Oh. You're welcome, if my answer is helpful to you, please give it a thumbs up (comment in the bottom left corner), your efforts are important to me, and your support is also the driving force for my progress. Wishing you good health and a happy mood!

Hello, yes, 300M needs to be replaced with a gigabit router, and it's not just a router, your optical modem.

All network devices such as network cards and network cables must support Gigabit network transmission standards. That is to say, in addition to gigabit routers, gigabit optical modems, gigabit network cards, and super five network cables are also needed.

Or Category 6 network cables.

Yes, 300 megabit broadband must use a gigabit router to reach 300 megabit rate, if you use a 100 megabit router then the speed can only reach 100 megabit, so that the rate can not reach 300 megabit, for reference only, more Anhui Telecom**, business information can pay attention to Anhui Telecom***.

Hello, there is no way to increase the speed of the router, and the only way to increase the speed is to customize the bandwidth at a larger price. Thank you for the role of the router 1After the computer is turned on and enters the system, you can directly access the Internet without dialing.

2.Realize multiple computers to access the Internet at the same time. 3.

Surf the Internet directly via wireless without plugging in a cable.

This is okay, if you can bring it, you can use a gigabit router, if your router does not match your broadband, it still can't, you have to use a universal router to use, don't use that kind of professional mobile telecommunications, Unicom this router.

Yes, more than 100 trillion can be used.

Yes.

The home is 200M broadband, in this case, when choosing a router, you should mainly check the router's WAN port, LAN port rate, that is, the maximum network speed of WAN and LAN port.

1. If the WAN port and LAN port of the router are 100 Gigabit, this router is a 100 Gigabit router and does not support 200M broadband.

2. If the WAN port of the router is 100 Gigabit and the LAN port is Gigabit, such a router is also a 100 Gigabit router and cannot support 200M broadband.

3. If the router is a gigabit WAN port or a gigabit LAN port, this router belongs to a gigabit router and supports 200M broadband.

Some areas are restricting routes.,Even if you connect to the route, you can't use it.,It's good to connect alone in ADSL.,It's so weird.,You can borrow a few people's routes to try and then decide whether to buy a router or not.。

The router reaches the gigabit network bandwidth, which is just the highest bandwidth.

In fact, it depends on how many megabytes of network you pull.

And the electricity consumption, gigabit and 100 gigabit is actually about the same, and it will not use much more electricity.

It refers to the transmission rate within the local area network, that is, the data transmission between terminals in the intranet. In fact, the network depends on the broadband operator.

The difference between a gigabit router and a 100 gigabit.

One can reach a maximum speed of 30 meters per second, and one can reach a maximum of 100 meters per second

A 300M broadband requires a full Gigabit wireless router to maximize the speed.

At present, there are many full gigabit routers on the market, and the quality of routers from ASUS, Netgear, Linksys, and Huawei is better.

At present, there are some routers on the market, the wireless is gigabit, but the wired is 100 gigabit, and this router cannot support 300M broadband.

That's why you can buy a full gigabit router.