How to use the two card slots of the Mate7 telecom version

Preface Main screen size: 6 inches Main screen resolution: 1920x1080 pixels rear camera:

13 million pixel front camera: 5 million pixel battery capacity: 4100mAh battery type:

Non-removable battery CPU: Smart octa-core memory: 2GB

The secondary card of the Huawei Mate7 telecom version of the phone does not support the use of the telecom card. 5G+1000M broadband for capricious use, intelligent dual gigabit, customized for a better life, details can be viewed in the online business hall of Guangxi Telecom. Customer service number 156 will answer for you.

No, you cannot. Cannot be used at the same time.

Only one telecom card can be used. If you use two telecom cards at the same time, the one set as a supplementary card will show no service and not available.

Today's mobile phones don't support the simultaneous use of two cards from the same carrier.

No, the telecom version is that card one can use a telecom card, and card two can only use a mobile or Unicom 2G network.

Hello! OK.

HUAWEI Mate7 Telecom Edition is dual SIM dual standby, the main card slot can only insert telecom cards, and the secondary card slot can be inserted mobile card, or China Unicom card, or expansion SD card. Of course, you can only use a 2G network with a mobile card.

Huawei mate7 telecom version of card one supports telecom 2 3 4G network, card two supports mobile Unicom's 2G network, so only card one can use telecom card, there is no way to support the use of two telecom cards.

Huawei Mate7 uses Kirin K925 processor - four chips + four A7 chips, Mali-T628 GPU, and is equipped with i3 coprocessor. In terms of networking, the device supports dual SIM dual standby, and like the P7, one of the card slots can be used to place memory cards or nano SIM cards.

Yes, whether it is the telecom version or other versions, it means that this card has a 3G or 4G network, and the others only have a 2G network.

Yes, Dual SIM** depends on what version he has.

The specific steps are as follows:

1. Use a knife to cut out the SIM card.

2. Glue the SIM card to the TF card.

3. Paste the renderings as follows.

4. After loading the card slot, it is as follows.

5. Finally, load the mobile phone and turn it on.

Dear, please refer to the Mate7 (MT7-TL10, MT7-TL00, MT7-UL00, MT7-CL00) dual card system and card slot schematic operation:

HUAWEI Mate7 mobile phone has two card slots, the upper card slot can be put into the micro SIM card, and the lower card slot is Nano SIM and MicroSD card. If your SIM card does not match the card slot, please go to the relevant sales office to replace it.

Two card slots, suitable for different sizes of SIM cards, can not be universal.

This dual-SIM phone is divided into two card slots.

Card slot 1 (upper card slot) is a micro SIM card, and card slot 2 is a nano SIM card or SD card. Let's take a look at the difference in SIM size.

Therefore, a SIM card that fits the upper card slot cannot be used to install it into the lower card slot.

On the upper and lower card slots of the mobile phone, you can actually see the type of SIM card that is suitable for installation. Please look at the picture, on the outermost side of the card slot, there is a mark.

If you want a card to be suitable for two card slots, you can go to the business hall, change a SIM card, and keep the outer ring, this can be similar to a converter, when you need to install it to become a micro SIM card, you don't need to remove it directly to change back to a nano card, and now the business hall is replaced with this kind of card.

It can be loaded with SIM cards supported by the two card slots respectively (upper card slot - Micro-USIM card, lower card slot - nano-USIM card and micro SD card).

2.Although according to Huawei's official statement, only one card can be inserted at a time, that is, dual SIM dual standby and SD expansion cannot be enjoyed at the same time, but many users have verified that this statement is not accurate, and users can install it by removing the chip. The disadvantage is that the failure rate is high and it is easy to damage the SIM card.

Mate7 card slot 2 and card slot 1 are different SIM cards, and the size is different.

The upper card slot is a micro SIM card, and the lower card slot is a nano SIM card (the same SIM card as Apple 5S and Apple 6), you can install it by cutting the card in the business hall.

I hope it can help you and I wish you a happy life.

The upper and lower card slots of Huawei Mate7 support China Unicom 4G, 3G2G and mobile 2G networks respectively. The main card can use 4G, the secondary card can not use 4G, can only use the 2G network, you can enter the settings - SIM management settings, the relevant settings are shown in the figure:

It depends on what network standard you are buying.