How to relocate the air conditioner, how to move the air conditioner and then install it

1. Preliminary preparation: the staff will come to disassemble the machine and bring a complete set of tools and safety equipment.

2. **Refrigerant: First turn on the machine to cool. After the operation of the external machine, close the small valve after the fluoride is collected, and close the large valve after the valve frost melts away, and shut down immediately; Pull off the power supply and tighten the safety cap; The refrigerant in the air conditioner is collected into the outdoor unit.

3. Dismantle the indoor unit: When disassembling the indoor unit, the condensate should be prevented from flowing into the circuit board.

4. Dismantling the outdoor unit: When disassembling the outdoor unit, pay attention to balance while disassembling and avoiding vibration and shaking; Finally, wrap it in plastic for easy handling.

5. Installation: When the air conditioner is reinstalled, attention should be paid to the installation position and convection. Finally, use detergent to detect leaks, observe whether there are bubbles coming out of each joint, and after verifying that the system is indeed leaking, tighten the valve safety cap.

6. Inspection: Finally, the air in the pipeline and the internal machine is removed and the test run and installation are completed.

Hello! The air conditioner is generally not dismantled after installation! I don't know if you're moving or do something else? If you want to disassemble it yourself, please follow the steps below!

Steps to collect fluoride:

1. When the opening mechanism is in a cold state:

Open the covers of the two connecting pipe valves of the outdoor unit with a wrench, use 5 hexagonal wrenches, put the thin (high-pressure valve) valve port, close the valve quickly, and close the thick valve (low pressure) after about 60 seconds, then shut down and cut off the power, so that the fluorine will receive the external unit, so that the machine can be disassembled.

Second, when installing, there is also an open valve to empty, as follows:

After fixing the internal and external units:

1.To connect the air conditioner well, the main thing is to tighten the connecting pipes of the internal and external units, and pay attention to the connection to prevent refrigerant leakage.

2.Use the hexagon switch to hit the automatic air conditioner to open the high-pressure valve (thin pipe valve) normally, and use the hexagon to resist the fluoride mouth thimble (the fluoride port is on the low pressure), so that the gas inside can run out, about 10 seconds, not too long, so as not to run too much, so that the air in the pipeline can be released.

4.Then open the valves of high and low pressure, and connect the power cord of the internal and external units.

Note: The connecting pipe is copper, and it cannot be coiled into a dead bend, otherwise it will affect the flow of refrigerant, resulting in the inability to cool and heat.

Note: When dismantling, fluorine should be collected first, otherwise it will cause fluorine leakage.

Hope mine can help you!

First turn on the fluorine, then cut off the power supply, remove the copper pipe, and then remove the machine. However, it is recommended that you find a professional to disassemble it, because the copper pipe is easy to break into sections, and it is useless after a section. To turn off fluoride is to close the small tube first, and then close the big tube after a while.

The first should be the refrigerant into the external machine, the second should be the connecting pipe of the internal and external machine, and the third should be dismantled from the internal and external machine.

1.The refrigerant** needs to be collected, no matter what time the air conditioner is moved, the refrigerant in the air conditioner needs to be collected into the outdoor unit before the air conditioner is disassembled. The specific method is as follows, first turn on the air condition, adjust the refrigeration condition, run for about 10 minutes, use a wrench to unscrew the cap on the interface between the liquid pipe and the gas pipe of the outdoor unit, and quickly close the shut-off valve of the high-pressure pipe (thin).

After a while, you can see the condensation outside the pipe, so you should quickly watch the low-pressure pipe (thick) cut-off valve, turn off the air conditioner, unplug the power supply, and tighten the safety cap, so that the refrigerant is completed. For the case of moving the machine in winter, it is also necessary to cover the temperature sensor probe of the indoor unit with a warm towel. 2.

To remove the indoor unit, the indoor unit of the air conditioner needs to be detected next, use a wrench to unscrew the connecting lock nut of the indoor unit, and use a sealed sodium to screw the silk pattern of the connecting joint of the indoor unit. The control line needs to be removed using a cross, pay attention to the order of dismantling, and install it in reverse order. The internal hanging board is very strong, and it takes a little effort to make it.

3.Dismantle the outdoor unit, the outdoor unit must be safely dismantled, because most of you are at high altitude, use tools such as wrenches to dismantle, and the unloading should be paid attention to stability, without vibration or bumps. For the takeover, it needs to be protected, so that dust can not get in.

Installation, to the new environment, you need to install the air conditioner, the order is first the indoor unit, then the outdoor unit, then the thick and thin pipes are connected, the thin pipe gate is opened with the inner corner, and finally the power is connected.

1. **Refrigerant:

The air conditioner should be started before moving and dismantling, and the refrigeration status can be set with the remote control.

After the compressor runs for 5 to 10 minutes and the refrigeration state is normal, use a wrench to unscrew the cap on the interface between the liquid pipe and the gas pipe of the external machine, and close the shut-off valve of the high-pressure pipe.

After 1 minute, the surface of the pipe is condensed, immediately close the low-pressure pipe cut-off valve, and at the same time quickly shut down, unplug the power supply, and tighten the safety cap with a wrench.

2. Dismantle the indoor unit

After the refrigerant**, the air conditioner can be relocated to the indoor unit, and the process of dismantling should be marked by hail grinding to avoid wrong connection during installation.

3. Relocation and dismantling of the outdoor unit of the air conditioner

The outdoor unit should be disassembled by a professional refrigeration maintenance worker to ensure safety.

After unscrewing the connecting lock nut of the external machine, the sealing sodium of the silver bucket should be used to unscrew the silk pattern of the connecting joint of the external machine, and then use a wrench to loosen the fixing screws of the foot of the external machine.

When the outdoor unit is put down after the air conditioner is moved and disassembled, it is best to hang it with a rope, and pay attention to balance while unloading, avoid vibration and bumps, and pay attention to safety.

When moving, we will choose the air conditioner to relocate, but the general moving company will charge separately when moving, saying that it is a professional air conditioning relocation technology. So what are the steps required for the real air conditioner to be moved?

When moving, we will choose the air conditioner to relocate, but the general moving company will charge separately when moving, saying that the imitation is made of professional air conditioning relocation technology. So what are the steps required for the real air conditioner to move to the fiber machine?

How to move the air conditioner:

1. Preliminary preparation: the relocation personnel will come to disassemble the machine and bring a complete set of tools and safety equipment.

2. **Refrigerant: first turn on the machine to cool, close the small valve after the external machine is running, close the large valve after the valve frost melts, and shut down immediately. Pull off the power supply and tighten the safety cap so that the refrigerant in the air conditioner moves the machine to collect into the outdoor unit.

3. Dismantle the indoor unit: When disassembling the indoor unit, the condensate should be prevented from flowing into the circuit board;

4. Disassemble the outdoor unit: When disassembling the outdoor unit, pay attention to the balance while disassembling the outdoor unit to avoid vibration and shaking, and then wrap it in plastic for handling.

5. Installation: When the air conditioner is reinstalled, attention should be paid to the installation location and convection. After that, use detergent to detect leaks, observe whether there are bubbles coming out of each joint, and after verifying that the system is indeed leaking, tighten the valve safety cap.

After all, they do not particularly understand the needs of air conditioners and various needs, and once there is a problem, it will cause a series of adverse reactions, and even lead to further aggravation of air conditioning failure.

After finding the repair shop where you bought the air conditioner, tell the other party where you need to move the air conditioner, you can easily solve it, and you can restore the normal operation of the air conditioner without affecting the normal use in the future.

Air conditioner is an extremely common and indispensable electrical appliance in our daily life, and many friends will go to the electrical appliance store to buy an air conditioner and put it at home ready to use. However, when some friends buy back the air conditioner, they find that they don't know how to move the air conditioner, and it is a big expense to ask a professional to move the air conditioner. So how should we do the air conditioning relocation ourselves?

So let me introduce the steps of moving the air conditioner.

Step 1:

Tighten the connected external coupling finely, and loosen the stem of the globe valve with a special wrench about 1 turn.

Step 2:

Hear the squeak of the silver closure of the external machine joint for about 30 seconds, and tighten the thick joint with a wrench.

Step 3:

Loosen the stem of the valve on the thick pipe and completely loosen the stem of the stop valve on the thin pipe, and then the air conditioner is emptied.

Step 4:

Completely loosen the stem of the shut-off valve on the thin tube, and the air conditioner is emptied. We were able to move the air conditioner.

After reading my method, now do you learn to move the air conditioner with a split? If you learn it, you can quickly share this method and let more people know about air conditioner relocation. While carrying out the above steps, we need to pay attention to the fact that it is better to choose a professional working technician to move, so as not to cause unnecessary economic losses.

The above are the steps for moving the air conditioner.

Tips:

If you can't handle it yourself, get a professional to have it inspected and repaired to avoid more damage.

Generally speaking, the reason for the need to move is because the location of the air conditioner installation is not suitable, and it needs to be adjusted, or because the decoration design of the room needs to change the position of the air conditioner. For the relocation operation of an air conditioner, the following steps need to be followed:

1.Prepare the tools.

You need to prepare some tools, such as large screwdrivers, wrenches, cutters, hard tape, etc.

2.Unplug the air conditioner from the outlet, etc.

You need to unplug the air conditioner from the power socket first, and then disconnect the indoor and outdoor units according to the direction. Generally speaking, some products need to disassemble the connecting wires of indoor and outdoor units separately, and some can directly disassemble the connecting cables.

3.Remove the air conditioning unit.

Moving an air conditioner requires some strength and requires careful operation. It is best to use two people to move, now place the air conditioning unit diagonally on the two wire trough racks, and tighten the tape.

4.Mobile air conditioner outdoor envy machine.

Two people need to move the outdoor unit together. It is best to place the outdoor unit of the air conditioner on a plastic mat and then move it to the new position with rollers (such as a small household trolley).

5.Connect the pipes.

After the relocation is completed, the pipes of the indoor and outdoor units need to be reconnected. Pipe connections need to be taken very carefully, and it is necessary to check whether the fluorine gas density is suitable after a certain period of time, and if the fluorine gas leaks, it needs to be repaired.

Summary: The relocation of the air conditioner requires strict operation by the operator, and if you don't understand, it is best to ask professionals to operate. Because the connection operation of the pipes is important during the relocation process, if the connection is not tight, fluorine leakage will cause the installed air conditioner to not work properly.

Therefore, when choosing an air conditioning relocation service provider, you need experienced service personnel and formal certificates to be able to rest assured.