tp link, that router can withstand a network of 50M

At present, any brand router on the market can support a 50M network;

The reasons are as follows: the maximum data transmission speed of M broadband is generally about 6M s;

2. The transmission rate of the wired port of the router is generally 100m-1000ms, which can fully carry the data transmission rate;

3. The WiFi bandwidth of the router is generally 150M-300M, which is also converted to a transmission rate of more than 6M S;

If the network speed is obviously not up to standard after the router is connected, the following methods can be used to determine the fault:

1. Connect the network cable directly to the computer, dial up the settings (the specific computer Internet settings can be searched), ** speed test, if the speed test does not meet or is significantly lower than the bandwidth speed, you need to contact the operator to solve the problem of insufficient bandwidth;

2. If the Internet speed is normal when directly connected to the computer, the basic judgment is that the router is faulty, and you can go to the store where the router was purchased for product replacement (the replacement problem can refer to the national three guarantees law);

As above, when choosing a router, try to buy a regular brand router in a regular store, and at the same time issue a valid invoice to avoid disputes after failure.

Basically, the current routers are at least 100M ports, and the throughput should be more than 50M. Are you sure you have 50M bandwidth? Directly connect to the Internet with a computer (without going through a router or other similar equipment) to see if it has a speed of 50m**.

It may be a problem with your router, you try to change a router, it stands to reason that your router also supports 50M bandwidth, and the speed cannot be as low as 6M, I have encountered many routers in terms of stability and quality, and indeed TP-Link routers are the lowest and most stable routers with the lowest repair rate. However, electronics are not 100% guaranteed.

It's obviously a network problem.

A home router can't carry a hundred terminals. An enterprise-class router is required.

We recommend that you use the TL-R4239G

Multi-WAN Gigabit Enterprise VPN Router.

tl-r4239g

5 Gigabit Ethernet ports, 1WAN + 3WAN + 1LAN built-in AC function, unified management of TP-Link enterprise APIPSec PPTP L2TP VPN, remote communication is more secure, internal and external network ARP protection and common attack protection.

Load balancing, intelligent IP bandwidth management, and connection limits.

Xiamian also has about 100 routers with a capacity of about 100 machines.

It's a good domineering broadband, you can use it at home, the home router is generally 100m, and it's of course no problem to use your 50.

In terms of speed, there is no problem, but the CPU performance of the home router is not high, the memory is also small, there is no problem with five or six machines, with more than 10 machines, there may be some problems such as slow network and network disconnection, more than 100 machines, it is recommended to use small and medium-sized routers, which have strong manageability and are not easy to have problems after setting.

You have to determine your needs first. If the demand is not particularly high, the 150m router on the market will do, the price is cheap and the functions are complete. If your requirements are a little higher,300M or more wireless router is more suitable,The coverage is very good,Faster,This aspect of netgear's products will be suitable for a little bit,Many of his homes are both quality and performance,But the price is relatively higher。

As long as the network speed is powerful, the router is not the key, at most buy a *** point.

Wired or wireless.

And how many machines to bring.