What should I do if there is water in the charging port of my Huawei mobile phone and it can t be tu

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after the liquid is ingested to avoid moisture spreading inside the phone.

2.Do not blow with a hair dryer or bake at high temperatures (including microwave heating) after liquid infusion, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after liquid ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. Because the phone has been turned off, please do not try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

Extend. Huawei mobile phones: Mate series, P series, Nova series, Maimang series, and Enjoy series.

1. Mate series.

The first series of Huawei mobile phones, representing the highest level of Huawei mobile phones, focuses on business battery life, large screen and high battery life, the birthplace of Huawei's new chips), focusing on business optimization technology (navigation, high-speed rail, data security, etc.), and the target group is middle-aged business people.

2. P series.

The second series, second only to the existence of the Mate series, focuses on business fashion, the main birthplace of Huawei's new technology, if the Mate series is the annual innovation of Huawei's hardware, then the P series is Huawei's annual innovation in software, focusing on camera technology and innovative software technology to attract young people.

3. Nova series.

The photo series, the nova series was released in September 16, targeting the young market, and the body design and performance are all made for young people.

The colorful camera is tall and beautiful, and the performance is not bad for photos. In particular, the high-value appearance accurately captures the consumption psychology of young people.

4. Maimang.

The positioning of the mid-range is too cost-effective, although the recent configuration has gradually gone up, but the CPU is still using the Kirin low-end (such as Maimang 6 is priced at 2399, but it is still using Kirin 659). The target group is middle-aged conservatives who like the design of large-screen round mobile phones.

5. Enjoy the series.

Huawei low-end, **low, cost-effective, the Enjoy series uses a Snapdragon CPU (such as the Snapdragon 425 used in the Enjoy 7).

1. Do not turn on the mobile phone after it enters the water, wipe the water on the surface, and then place it in a dry and absorbent environment, and then turn it on after standing for at least 48 hours.

2. If it can't be charged after turning on, it may be that the battery is broken, and it is recommended to replace it with a new battery.

3. It is also possible that the charging interface of the mobile phone is damaged, resulting in poor contact and cannot be charged, so it is recommended to go to the after-sales service for investigation and maintenance.

Mobile phones are made up of many delicate electronic components, and there is a great risk of water ingress. If the phone is using a removable battery, remove the battery immediately, dry the water stains on the surface of the phone, and then place the phone in a strong absorbent environment, such as activated carbon, rice, moisture-proof agent, let it stand for 48 hours, and then try to turn it on after drying.

If some functions are missing after starting, such as not being able to turn on, the screen touch is not sensitive, and the battery cannot be charged, it is a hardware failure and can only be repaired at after-sales outlets.

Send it in for repair as soon as possible so that you can avoid greater losses, and water in the machine will only make the machine more problematic.

The only solution to this is that you must take it to the repair shop to help you deal with it, because you don't understand the way these industries deal with it, you have to send it in time.

If the mobile phone charging port is flooded, it should be possible that there is no way to use it, because after all, it is inside, and who still uses it may be that there is no way to charge it again.

One way is to take it to a mobile phone repair shop, ask the staff to remove the water from the mobile phone charging port, and then check whether the charging port is broken? If it's broken, replace it with a new charging port, and check the circuit board of the phone, if there is no problem, maybe it will be able to charge.

You can use a paper towel to wipe off the obvious water stains, and then the hair dryer will dry the water before charging. If you still can't charge after blowing dry water, then you probably have a problem with the charging port or motherboard.

Huawei mobile phone charging port into the water, there is no way to charge, that can only be replaced, and after the water, if the parts inside are connected to the electricity, it will be completely scrapped, at this time we can replace the battery, if the battery is replaced, there is no way to solve it, you can only change the mobile phone.

You can use a hair dryer to dry the water. Then it should be okay to charge it, because the water can't be charged, which is a trivial matter.

If you charge, it will cause you to burn the entire motherboard of the phone, it is recommended that you go to the mobile phone repair shop to clean up.

Leave in a ventilated and dry place for 12 to 24 hours before use.

You can blow it with a hair dryer until it dries, or put it in a bag of rice and let the rice submerge your phone and see what happens later. If it really doesn't work, you have to let a professional fix it.

Use a hair dryer to blow along the charging port, generally blowing for ten minutes to dry, if it doesn't work, you can only remove the back shell and clean it up.

You can use the paper towel bar to absorb the water in the charging port of the mobile phone, because the paper towel can absorb water.

It is recommended to go to the after-sales service for testing.

When the mobile phone charger gets into the water, you should also pay attention to the following aspects:

1.Do not charge. When the water has not been completely removed, charging the mobile phone will cause a short circuit in the internal components of the charging head and burn out other parts.

2.Don't just dismantle it. Soaking in water for a long time will inevitably lead to a very sufficient amount of water vapor inside the charging head, and it is indeed necessary to remove water at this time, but once the shell is opened, the precision parts will be revealed, and you must be careful not to move the things on the circuit board at this time to avoid damage.

It is better to have an experienced person to operate it more securely.

3.Please dehumidify with cold air. Compared with hot air, cold air is less efficient in removing water, but because the local high temperature can easily cause the circuit board parts to melt and deform, making the charger unusable in the future, it is wiser to choose cold air drying.

It is best to gently wipe off the water with a dry paper towel and then dry it with a cold air or electric fan.

After entering the water, wipe it with a dry cloth first, then blow it with a hair dryer for a while, or put it in a rice bag for a while before flushing it, and if you charge it immediately, the phone will be useless.

If the phone gets into the water, it can't be charged and the battery can only be replaced!

Because there is a place with electricity!

In fact, I think in this case, you still have to take the phone to the repair shop to check it, don't blindly charge it, especially before the water in the phone is poured out.

Go to a professional repair shop for a repair, or buy a new phone.