I need to log in to my computer and password, and then the password and all the right just can t get

At the bottom, it is written that your last login time was:

Hello dear <>

The computer login password is correct but the password is not correct, you can do this: 1. First of all, you need to repeatedly determine whether the input of the secret shouting code is really correct, and whether it is too fast to enter the password incorrectly. 2. Or enter the password one by one on the keyboard slowly, try to see if it is correct, if it is still wrong, recall whether the letters of the password have forgotten to convert the case.

3. If the way to enter the password does not work, just assume that the password is wrong, we will restart the computer, and then use the security mode to enter the main interface of the computer. 4. Press and hold the F8 button when restarting the computer and then turn it on, enter the safe mode - control panel + user account - delete or reset the password. I wish you a happy life!

Hope mine is helpful to you ha.

Summary. 1. Welcome interface, which is a relatively friendly interface, will automatically display the administrator account, and there will be the user's ** on the left. If you don't have a password, you can click to log in directly.

2. Sometimes it may be that the system has been optimized with some optimization software, and it becomes not a welcome interface to log in, but when you log in, a login box will appear, requiring you to enter a password, no password is required (provided that you do not set a password), and then click to log in.

1) If the login box and user login are blank, then enter the username administrator at this time, no password is required (provided you have not set a password), and then click to log in.

If it's the case I said above, then it's set up to log in without the welcome interface, and the method of modification is.

Start - Run Enter, open User Account Settings - Change how users log in and log out - Use the Welcome Screen and Hit before using Quick User Switch.

My computer used to use a password, and now I suddenly want a password to log in to this, what should I do, dear now, I will answer for you 1, welcome interface, it is a more friendly interface, and the administrator account will be displayed automatically, and there will be a user on the left. If you don't have a password, you can click to log in directly. 2. Sometimes it may be that the system has been optimized with some optimization software, and it becomes not a welcome interface to log in, but when you log in, a login box will appear, requiring you to enter a password, no password is required (provided that you do not set a password), and then click to log in.

1) If the login box and user login are blank, then enter the username administrator at this time, no password is required (provided you have not set a password), and then click to log in. If this is the case I said above, then it is set to log in without the welcome interface, and the modification method is to start - run enter, open the user account settings - change the way the user logs in and log out - use the welcome interface and use the quick user switch before typing .

There is another way for you to try again.

Click "Start Run", enter control userpasswords2 and press enter, remove the check box in front of "To use this machine, the user must enter the password" in the "User Account" window that opens, press "Apply", and enter the administrator account password in the "Auto Login" window that pops up. Press "OK" twice to control the operation

1. If the password is all numbers, there is no case problem, you can see if the number key is turned on.

2. Whether you remember the password incorrectly, or you mistakenly hit some keys when setting the password, and you can't find it.

3. Whether the keyboard is damaged, whether there are some abnormal keys, resulting in the wrong password.

4. If you still can't enter after repeated attempts, you can eliminate the password by reinstalling the system or restoring it, and then set it again.

5. One-click restore can be entered without a password.

Hehe, then it must be the wrong password.

1.What's going on with the computer always prompting you to enter a password to connect to the Internet?

The landlord can save the user name and password for the following users on the front of the checkbox, as shown in the figure below.

If you are wireless, see if the browser is set to automatically dial the number, click the tool-inter option-connection in the navigation bar, and see if it is never dial-up connection, if not, it is changed to never dial-up connection, as shown in the figure below.

2.What should I do if I open the computer in my online neighborhood and ask for a password.

I asked for a username and password to access my computer through the online neighbor because the permission settings in the sharing settings were incorrect.

Steps: 1. Connect both computers to the same router.

2. Right-click on the desktop network --- properties --- change the advanced sharing settings.

3. Select Public Network --- select the following options: Enable Network Discovery--- Start File and Printer Sharing--- Enable Sharing So that users who can access the network can read and write files in public folders (can not be selected) - Turn off password protection sharing (other options use the default).

4. Save and confirm.

5. Select the folder or drive letter that needs to be shared, and right-click - Properties.

6. Open the Security tab - select - Add - everyone.

7. Open the Share tab--- select Share --- pop-up dialog box --- add "guest"--sharing.

8. Select Advanced Sharing --Select Share this file --OK.

9. Select Advanced Sharing -- Select Share this file -- Select Permissions -- Add Everyone.

10. Double-click on another computer to open the network, and the folder or drive letter you just shared will appear.

Note: To prevent accidental errors, turn off the firewalls on both computers.

3.When you open the web page, you are always asked to enter the broadband and password.

Sometimes, when we open a web page on a computer, the web page always asks you to enter the broadband password or choose the link method. What should I do if I open a web page and keep asking you to enter your broadband and password? This is very troublesome, how can we delete it, let's go to the web page without entering the broadband password or choosing the link method.

Open Browser - Tools - Inter Options - Connections. Leave the content in the "Empty Mountain Spring Number and Virtual Private Network Settings" for the broadband connection you use, select "Never dial connection" below, and in the "LAN Settings", do not check all the checks.

In this way, you don't have to enter the broadband password all the time when you go to the web in the future. How to deal with netizens: Click [Start] - [Control Panel] - [Inter Properties] as shown above, select the [Connection] tab, and delete the unnecessary dial-up connections in [Dial-up and Virtual Private Network Settings] (you can delete them all).

If the security level of the inter is too high. Prevents system pop-ups or ads. You can select the [Security] tab, click [Custom] and select "Security Level - Low" in the "Reset to" section.

If you can't enter numbers when you enter your password on your computer's login screen, it may be because your keyboard is malfunctioning. At this point, you can try the following and let workarounds:

Check the keyboard connection: If you're using wired keys to call the board, check that the keyboard cable is securely connected to the computer. If it is a wireless keyboard, you need to confirm that the connection between the keyboard and the computer is normal.

Replace the keyboard battery: If you are using a wireless keyboard, you can check whether the keyboard's battery has any electric noise. If the battery has run out, it needs to be replaced with a new one.

Try a different keyboard: If you have a spare keyboard, plug it into your computer and see if it works.

Use the on-screen keyboard: On the computer login interface, there is a "ease of access" icon at the bottom right of the place where the password is entered, click it to pop up the menu, select "on-screen keyboard", and you can use the mouse to enter the password.

Use a numeric keypad: Some keyboards don't have a separate numeric keypad on them, and you need to go through a key combination to enter numbers. Try pressing the "Num Lock" key and then using the numeric keypad to enter your password.

If the above methods still don't solve the problem, we recommend trying to restart the computer, or find a solution to the problem, or contact a professional to repair it.

Summary. This question is up to me, it takes a little time to type, so please be patient.

The computer boots up and logs in the user password, and it can't be logged in, what's going on?

This question is up to me, it takes a little time to type, so please be patient.

Click on what happens to log in.

Clicking Sign In doesn't work.

Nothing happens?

What's going on?

Hold on. You press the esc button in the upper left corner to see if it works.

No way. You try to restart it first.

Is the internet connection working?