iPhone6 is always stuck on the screen and can t swipe why

1. The failure of the Apple 6 touch screen is generally caused by screen damage, and a small part is caused by the motherboard. The phenomenon of Apple 6 touch screen failure is generally caused by falling, water or changing the screen. Falling pressure will cause the screen to be damaged, the motherboard will be disconnected, the chip will be broken, etc.; 2. Water ingress will burn the screen or damage the motherboard chip or circuit; Changing the screen refers to the replacement of the assembly screen, the outer screen, and the rear pressure screen, because the original screen is from the integrated screen, and the outside screen change is to separate the glass screen, and then press a glass screen up, the quality of this screen is unstable, and it is easy to have a touch failure in later use.

3. The touch screen failure of Apple 6 due to screen problems needs to be replaced, and the touch screen failure caused by motherboard problems needs to repair the motherboard.

Summary. Hello dear. The iPhone screen is not broken but the screen does not slide, there may be a variety of reasons:

1. Mobile phone cases, water droplets, oil stains and other items are stained on the screen, and the pressure makes the screen no longer inductive finger operation. 2. The system is stuck due to too much running software or other reasons. 3. If the iPhone battery is too low, it will automatically switch to low-power mode, then turn off the power, and the screen will not respond at the same time.

Check your phone to determine the specific situation and solve it according to the corresponding solutions.

Hello dear. The iPhone screen is not broken, but the screen does not slide, there may be a variety of reasons: 1. The phone case, water droplets, oil stains and other items are stained on the screen, and the pressure makes the screen no longer induce finger operation.

2. The system is stuck due to too much running software or its delay in grinding. 3. If the battery of the iPhone is too low, the code will automatically switch to the low-power mode, and then turn off the power, and the screen will not respond at the same time. Check your phone to determine the specific situation and solve it according to the corresponding solutions.

The first possible reason: the screen caused by the software is temporarily unresponsive, you can wait for a while, see if there is a response, generally after a while, if not, close the program by yourself. The second possible cause:

System issues. As a result, the system is stuck and unable to respond due to the operation of some programs. At this time, it is necessary to start the machine with Brother Chongyu, and it can generally be used normally after restarting.

The third possible reason: hardware failure, the iPhone itself did not enter the liquid dust or was dropped, due to the function of the mobile phone parts caused by the problem. In this case, the iPhone can only be sent to Apple after-sales for testing.

Apple mobile phone screen failure is usually a failure of the mobile phone hardware or system failure, you can first use iCloud cloud service to erase the phone to restore the phone to factory settings, if the phone after the factory reset screen failure can not be solved, you can go to the Apple after-sales center to detect whether the hardware of the mobile phone is faulty.

Causes and solutions:

1. The touch screen is broken (for example, in a greasy or magnetic environment).

Solution: Replace the touch screen.

2. Motherboard leakage.

Solution: Repair and replace the motherboard.

3. The battery is aging and damaged.

Workaround: Replace the battery.

Operating Equipment: Dell laptops.

Operating system: win10

Operating Procedure: Browser.

The steps to factory reset an iPhone with iCloud are as follows:

2. Log in to iCloud on your phone.

3. After logging in, click "Find My iPhone".

4. Then click "Erase iPhone".

5. The webpage pops up prompting "Erase this iPhone", click the "Erase" option.

6. Finally, enter the password of iCloud, and the phone will be automatically factory reset.

Take the Apple 11 mobile phone, the system as an example:

1. It may be that the screen cable of the mobile phone is loose, broken, falling off and other faults, which makes the mobile phone malfunction and causes the mobile phone screen to be unresponsive. If this kind of problem occurs, you can generally only ask a professional maintenance personnel to check and repair, or repair or replace the screen parts of the mobile phone.

2. It may be that there is a bug in the system of the mobile phone, which causes the operation of the mobile phone to be abnormal. In this case, the only way to do this is to reinstall the system and restore the system to its original version.

3. It may be a screen failure caused by a conflict between the system of the mobile phone and the installed software. In this case, you can try to shut down the device and restart it first, and the unresponsive screen may return to normal after the phone is restarted. If it doesn't work, you can turn on your phone"Settings", you can uninstall the redundant software of the mobile phone, or clear the data, reinstall the system, etc.

The above situation and method are applicable to most Apple mobile phone models.

There are three situations when the iPhone screen can't slide:

1. The first situation: the screen caused by the software does not respond temporarily;

Solution: 1) Try to press the "Home Screen" button twice in a row to see if you can open the background multi-task management interface. If you can open the background multitasking management interface, exit the currently stuck application from the background at this time, that is, slide the application software up and throw it to close.

2) If you press the home button on the home screen twice in a row and there is no response, you can also try to press the power button at this time to see if you can lock the screen. If the screen locks and the screen is black normally after pressing the power button, press the "home button or power button on the home screen" again to light the screen again, which can solve the previous situation that the screen does not respond.

2. The second case: system problems;

Solution: 1) You can press the "Home + Power" button on the main screen at the same time, and press and hold to see if the machine will react. If this trick works, you'll see a black screen and will automatically restart, with a white apple appearing on the screen.

2) If pressing the "Home + Power" button at the same time does not work, you can also connect the iPhone to the power cord and press it at the same time to see if there will be a response. For general system problems, such a method of operation is completely solvable.

3. The third situation: hardware failure;

Solution: The iPhone itself is not in liquid or has been dropped, and the problem is caused by the function of the phone parts themselves. For such cases, you can send your iPhone to Apple for after-sales testing and enjoy a normal warranty.

The screen doesn't slide, generally it's stuck, it's a crash, and it's possible that the touch screen is malfunctioning.

All phones in the iPhone series generally do not get stuck, but there are always exceptions.

If you get stuck, wait patiently for a while, and you can usually return to normal, and you can close the program running in the background as needed.

If it is a crash, press and hold the home button and the lock screen button at the same time until the phone screen goes black, that is, turn off and restart it and release it after the boot image appears.

If the touch screen is faulty, it is recommended to go to an official repair point for repair.

Checking the background program in time can effectively avoid such situations.

1. The memory of the mobile phone occupies too much, and the cup cannot be processed.

Solution: Press the main menu button twice in a row to close other unwanted background apps.

2. The application itself is a program problem.

Workaround: Uninstall the problematic app.

3. There is an error in the mobile phone system and you cannot continue to use it.

Solution: Press the power button and the main menu button at the same time for more than 10 seconds to force restart.