If the car has carbon deposits, how can the carbon deposits of the car be exhausted?

Replace the spark plug regularly, the spark plug has a direct relationship with the internal combustion of the car, and a good spark plug can make the car start ignition quickly. Run more at high speeds, increase the speed to increase the power of the car, increase the exhaust power, and use the air flow to wash the carbon deposits in the airway, through the combustion chamber foam cleaning agent to clean, this method is:Remove the spark plug, inject cleaning agent into the cylinder, soak it, dissolve the carbon deposit, and then pump out the cleaning solutionHowever, there is a certain risk, and it is recommended not to go to a non-professional store.

Clean the throttle and intake tract, remove the throttle, you can clearly see the severity of carbon deposits, clean with professional cleaning agents, and then wipe clean with rags, as for the cleaning of carbon deposits in the engine cylinder, you must remove the cylinder head, timing belt, etc. to clean, which is expensive, and has an impact on engine power and sealing.

Filling carbon deposition cleaning agent, which is divided into curing type and cleaning, curing type, is the kind of small blue bottle that we usually ask to add at gas stations, which is called curing fuel additives, or become carbon deposition cleaners.

If the carbon accumulation is less, there is no impact on the driving of the vehicle, then we do not need to rush to clean up, but if the carbon accumulation is more, there is a certain impact on our driving, then we do want to clean up the carbon deposit.

Such as, throttle valves, fuel injectors, spark plugs, intake and exhaust valves, combustion chambers, pistons, piston rings, cylinder blocks, etc. You need to go to the 4S store for professional carbon cleanup. Personally, I think that as long as the engine has no design defects, is maintained on time during use, uses qualified oil spare parts, goes to a regular gas station to refuel, and the engine is overhauled in time without illness, these can basically avoid the impact of carbon deposits.

There are several main locations for carbon deposition cleaning – lubrication system, air intake system and fuel system. The intake system is mainly the intake manifold and throttle;

How to clean up the best way to clean up carbon deposits in automobiles.

Generally, the commonly used methods are: dismantling and washing, hanging bottle cleaning, and fuel additives.

1. Dismantle and wash. This method is very direct and rude, but it is generally sent to the 4S store for disassembly, the disassembly of the engine is more complicated, no matter what parts will affect its performance more or less every time it is disassembled, you need to ask a professional master to disassemble. The carbon deposits in the engine can be seen directly when dismantled and washed, and the cleaning will be relatively clean.

However, the cost will be relatively high, and it will also require technology.

2. Hanging bottle cleaning.

This method is also relatively common, the hanging bottle is to discharge the cleaning agent into the air intake, dilute and soften the carbon deposit to turn it into a slurry, and then burn it from the cylinder to discharge. Generally, the cleaning objects include the intake tract, throttle, intake valve, fuel injector, cylinder inside, etc., but the effect is not as direct and obvious as dismantling and washing.

3. Fuel additives.

The main function of additives is to drill into the pores of carbon deposits with the help of strong surface activity, destroy their structure, and gradually dissolve these carbon particles from the metal surface, and then discharge them through exhaust gas after burning with fuel at high temperatures. Effective fuel additives such as PNF stock solution are non-corrosive, will not clog ternary, and have a relatively high level of safety.

Maintenance. Because carbon deposits are difficult to drain, they can only be drained by maintenance, cleaning spark plugs, etc.

It is to replace the parts of the car exhaust system, so that it can be completely removed, and if it is not replaced, it will not be clean.

First of all, you must pay attention to the maintenance of the vehicle, and secondly, replace the spark plugs regularly.

Drive your car to a workshop for a professional maintenance person to inspect and clean it, and they will professionally remove the valve and engine to check for carbon deposits. If you are not a professional, you should not easily disassemble it yourself, and unprofessional methods will cause greater damage to the performance of the car. It can be cleaned by hanging the bottleHowever, the risk of cleaning is relatively high, and ordinary stores are not willing to do it.

Spark plug carbon deposit: The spark plug is in the combustion chamber, and the working conditions are very harsh, basically the same degree of carbon deposition in the combustion chamber. If the carbon deposition of the spark plug is severe, it will cause poor ignition and creepage.

The use of fuel additives - fuel treasure can also play a certain role in cleaning up carbon deposits. Because fuel treasure is an active agent, it can promote the full combustion of fuel, improve power, purify exhaust gas, and the most important thing is that it also has a certain function of cleaning up carbon deposits. If you don't want to repair, you can run more high-speed, if it is a new car, the carbon deposit is not very serious, you can use the way of running more high-speed, high-speed driving on the one hand can be used to flush the air intake, on the other hand, pull up the engine speed, in fact, as long as you usually develop good driving habits, you can effectively extend the frequency of carbon deposits, the formation of carbon deposits is slow, the number of times you need to clean up is less, and you don't need to add or install anything that may cause damage to the car.

The kind of little blue bottle stuff that we usually ask for at the gas station is called a curative fuel additive, or it becomes a carbon deposit cleaner. This curing type of carbon deposit cleaner does not mean that it cannot be filled, but it must be filled according to the cycle, and the best way is to remove the fuel injector, spark plug, throttle valve of the engine, and the oxygen sensor and three-way catalytic converter in the exhaust system. The technical difficulty of disassembly is actually very low, and the disassembly and assembly will not affect the stability of the vehicle at all.

We need to clean it in a targeted manner. Generally speaking, after 30,000 kilometers, it is necessary to consider cleaning carbon deposits, and if the quality of the oil is not high, it may be about 20,000 kilometers to be cleaned.

Engine dismantling and cleaning is the most effective way to clean up carbon deposits, in terms of effect, engine dismantling and cleaning is undoubtedly the best, but the whole process requires a lot of time and energy, the engine needs to be disassembled, and then use detergents, ultrasonic and other methods to completely and thoroughly remove carbon deposits on parts. Of course, ** is also the most expensive. In addition to engine dismantling and washing, cleaning up car carbon deposits can also be done in the following ways:

The car hangs the bottle. A bottle-shaped tool is hung above the engine, and then the detergent is poured into the bottle tool and introduced into the engine through the catheter to clean the carbon deposit. **Around $1000.

If the engine has serious carbon deposits, this method will cause the three-way catalytic system to be blocked or damaged; Machine wash. The cleaning agent is injected into a machine, and then the machine pressurizes the combustion chamber to let the cleaning agent react with the carbon deposit to dissolve, and then the waste liquid is pumped out. This method has a good effect on some serious carbon deposits, and there is no need to disassemble the engine, but the cost is higher, and the oil needs to be changed after cleaning.

Generally, the car is driven to the highway for high-speed training for drainage, and the high-speed operation will indeed lead to some dust discharge.

First: run more high-speed and try to increase the shift speed of the hand-stop car. Second: Don't idle for long periods of time. Third: refill with high-quality gasoline. Fourth: Develop a good habit of regular cleaning, all cleaning is periodic.

If it is a turbocharged engine, do not turn off the engine immediately after climbing or high-speed driving, and turn off the engine after a few minutes of idling. In fact, "carbon deposit" is not actually "charcoal", but a mixture, which is the colloidal matter left by oil, dust, debris and other debris when the engine works for a long time, and we usually call these colloids "carbon deposit". As the core component of the car, it is recommended that the engine must be maintained on time and do not use inferior lubricating oil, so as not to weaken the performance of the car.

Cleaning of oil circuit carbon deposits. The carbon deposits in the cleaning oil circuit mainly include the carbon deposits in the positions of fuel injectors, combustion chambers, spark plugs and throttle valves, etc., which often lead to insufficient vehicle power, idle driving or difficulty starting. Therefore, it is particularly important to clean the carbon deposits of the car.

In fact, the car carbon deposition of the throttle valve is very simple. Haduo Carbon Removal Net recommends that riders clean the throttle every 20,000 kilometers, and there is no need to clean it every time it is maintained, which will cause certain impact and damage to the throttle.

Frequent idling will reduce the airflow in the engine, so that the carbon deposits in the engine cannot be blown away, so that the carbon deposits are deposited; In addition, the longer the idle time, the slower the engine temperature, and the slower evaporation rate of gasoline injected into the back of the valve, which also produces carbon deposits. At the same time, if you run at high speeds, you can use the high air flow generated at high speeds to blow away carbon deposits in the engine, and you can also reduce carbon deposits by increasing the speed of gear shifting. The main component of carbon deposition is the formation of impurities in gasoline, and the formation of carbon deposition in gasoline with high cleanliness will be poorer, and the life of the engine will be prolonged, which is also the most effective and comprehensive method.

Cleaning carbon deposits inside the engine is often a headache for riders, because the engine cannot be disassembled. In fact, now with the car carbon deposition cleaning agent, cleaning the carbon inside the engine is relatively simple, only need to add the car carbon deposition cleaning agent to the engine, it will dissolve the sediment such as sludge and gum inside the engine, so as to achieve the purpose of removing the car carbon deposition.

To the auto repair shop or 4S shop for in-depth maintenance, special cleaning equipment for cleaning, the effect is more obvious, the full set of cleaning generally charges 400-1000, the cleaning time is about 2 hours.

Clean up on time. Since carbon deposits cannot be avoided, car owners do not need to be afraid, as long as they are cleaned up on time, it will not affect the performance of the car. Under normal circumstances, the car needs to be cleaned every six months or 10,000 kilometers, and the carbon deposit cleaning of the air intake system is done every 20,000 to 40,000 kilometers, so that there is basically no impact on the car.

Additive cleaning products, effective cleaning of fuel injectors, intake valves, combustion chambers, three-way catalytic parts of the carbon deposit, the advantage is that the operation is convenient, directly add the fuel tank, the disadvantage is that the intake tract, throttle and other parts can not be cleaned, the cleaning effect is not as thorough as the direct cleaning, need to be used regularly, the general charge is about 100-150 a bottle (do not use fuel treasure, fuel treasure is to inhibit carbon deposit, not to eliminate carbon deposit).

Car carbon deposition has always been the most headache in the maintenance of car owners, car carbon deposition not only causes high fuel consumption, but also easy to wear engine parts, it is more troublesome to clean up, how to effectively solve the big problem of car carbon deposition, which requires us to develop good driving habits in the daily driving process. Often run the road with relatively large dust, the dust suspended in the air will be sucked into the cylinder, which will accelerate the wear of the piston group and the cylinder, which will produce carbon deposits, it is recommended that the air filter should be replaced every 10,000 kilometers, and it should be cleaned up from time to time.

The method is very simple - pull the high speed. The high-speed here is not that you can drive 120 kilometers an hour on the highway, but that you need to increase the speed. By increasing the speed of the engine, carbon deposits are removed from the interior of the car, so as to protect your car.

Automobile carbon deposition is related to the quality of the engine, of course, it also has a lot to do with personal driving habits, as an ordinary consumer, in the face of car carbon deposition, we ourselves can not deal with it, you can go to the car maintenance shop to ask a professional maintenance technician to give clear carbon deposition when car maintenance.

100% pure vegetable fuel additives: (1) Add oil to each tank to improve fuel quality. (2) Clean the gum of the fuel tank and oil supply system (3) No new carbon deposits will be generated, and the old carbon deposits will be cleaned up to make the atomization of the fuel injector better.

4) Improve the power to make the engine reach the best working condition. (5) Exhaust emissions are better than the limit standard (6) The fuel saving rate of gasoline vehicles is 10-30%, and the fuel saving rate of diesel vehicles is 5-15%.

100% of vehicles are qualified for annual inspection and road inspection (except for engine oil).

In the process of working in the engine, the mixture will be completely burned to form carbon deposits, which are divided into gasoline carbon deposits and oil carbon deposits, and the generation of automobile carbon deposits has many relationships with the concentration of the mixture, spark intensity, and temperature, and the discharge is inexhaustible. Oil deposition is caused by burning engine oil and cannot be avoided.

The car has been driving in the city for a long time, and it always starts and stops when it encounters traffic lights, and it is easy to produce carbon deposits in the engine if the gasoline cannot be burned separately. The best way to get rid of carbon is to drive on a high speed and let the car run at high speed for hours. When the engine is running at high speeds, it can remove most of the carbon deposits from the exhaust pipe.

I think if you want to completely remove carbon deposits from your car, you can go to a professional car repair and cleaning company, so that their professional service can completely remove carbon deposits from the car and avoid damage to the car itself, so this is a very good way.

A great way to clean up carbon deposits in your car:

2. To maintain and clean frequently, when the car enters maintenance, you can use special cleaning equipment to disassemble and clean the parts that are easy to accumulate carbon.

3. Running at high speed is also a small skill for cleaning up carbon deposits in cars, maintaining the engine speed to about 2500 3000, and driving dozens of kilometers is also a good help for carbon deposits.