How to connect to JCG Infinity Router?

<>1. Plug the power adapter into the connected power strip, and connect the power interface of the router at the other end, as shown in the figure above;

2. The RJ45 interface of the model and the interface of the router marked as WAN are connected with twisted pairs;

3. The RJ45 interface of the computer motherboard network card and one of the interfaces marked as LAN on the router are connected with a twisted pair. (Routers usually have multiple LAN interfaces, and there is no difference between different numbered LAN interfaces in actual applications.) ）

1.Make sure your router and computer are connected. 2.Open the IE browser and enter the JCG JHR-N926R wireless router settings interface.

3.Click Quick Setup Wizard.

4.A password entry window will pop up, and the username and password will be "admin" by default

5.After clicking OK, you will enter the following setting interface, click Next.

6.If you are not sure about the connection mode, select Auto Detect and the router will automatically select the appropriate connection mode.

7.Click Next to enter the wireless network settings, if there is no special need, please do not modify, the default can be.

8.Once the wireless router is set up, tap Apply and wait for the wireless router to restart automatically.

JCG router, its "smart" refers to a series of functions that "are like a personal computer, have an independent operating system, can be installed by the user, control the bandwidth by themselves, control the number of people by themselves, control the browsing of the web by themselves, and control the time".

Method Steps:

First, power on the JCG wireless router and connect the wireless router to the computer with a network cable. Turn off the Wi-Fi and turn on the local connection. Check the IP address of the wireless router and enter the IP address on the web page, the default IP address is.

Press Enter to enter the wireless router's setup page by clicking on the Quick Setup Wizard.

Enter the default admin username and password, username admin, password clearer admin Click OK.

Click Next. I use Telecom, you need to enter and password to choose PPPoE, and if you are a network operator, you can choose DHCP or a fixed IP address according to the information provided by the network operator, and fill in the next step.

In general, the settings are default, the frequency switch is selected to be on, the frequency working mode is selected to be mixed, the SSID is the user name of the wireless network, which can be changed according to your wishes, pay attention to set it to Chinese. Hide the option to deactivate, the channel can be selected freely, in general, the default channel is.

After the setting is completed, click Next, click Apply, and the preliminary setting is completed.

The system restarts.

Go back to the homepage, click Advanced Settings, select Wireless Settings --- Security Settings--- change the authentication key (the connection password of the wireless router).

The installation and setup of the router is as follows:

1.First connect the line, you can refer to the figure below.

4.Choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

The router can be set up through the mobile phone, and the mobile phone can set up the router as follows:

1. First, connect the router and the broadband modem with a network cable, and the connection method is to connect the LAN port of the broadband modem with the WAN port of the router through the network cable.

2. After the hardware is connected, use the mobile phone to connect to the wireless signal of the router, then open the mobile phone browser, enter the login address and login password of the router, and select Quick Settings after logging in to the background.

3. Then fill in the broadband account number and password as required.

4. Then set the wireless name and password to save and then the router can be used normally.

Here's how it works:1Wiring method: ** wire to the ADSL network port of Modem, LAN network port of Modem to the WAN port of the wireless router, LAN network port of the wireless router to the computer network port;

2.Right-click the network connection icon in the lower right corner of the desktop on the computer - Open Network and Sharing Center - Local Connection - Properties - Internet Protocol Version - Set the IP address and DNS server address to be obtained automatically;

3.Open any browser on the computer, enter the address bar for details on the back of the wireless router), enter the administrator and password to log in to enter the background;

4.Setup Wizard, the next step, generally will pop up automatically, if not, click the Setup Wizard on the left side;

5.The wireless router selects the Internet access mode by default, here the broadband dial-up is used as an example, the next step (dynamic or static network cable without dial-up, the wireless router will automatically jump to the wireless network setting interface after default recognition);

6.Fill in the broadband dial-up and password, the next step (the broadband dial-up and password given by the operator when reporting the installation of network cables);

7.Set up the wireless network (avoid using Chinese characters), choose the encryption method and set the encryption password (the encryption password file to avoid using simple numeric passwords, it is recommended to configure the size of the scribbling letters, numbers and special symbols together, the most important thing is to remember);

8.Click to complete the Internet settings on your wireless router.

Note: The modification of the local connection IP address and DNS server address is operated in the Windows 7 system environment, **For reference only, the details are based on the specific wireless router version and model.

Turn on the wireless function of the router

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Select Wireless Settings --- Basic Settings.

3. Check [Turn on wireless function] and click Save.

Set wifi password].

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

After connecting the network cable, enter the router settings in the browser.