The phone can t enter the router settings interface

If your phone cannot connect to the Wi-Fi network, please try to do the following common situations:

1.If you could connect before, you can't connect now:

2) Check if the Wi-Fi password entered is correct.

2.If you can't connect for the first time or can't connect to a public Wi-Fi:

Check whether other devices under the same wireless network are connected properly and whether connection restrictions are set on the wireless network.

3.If you cannot connect to the wireless network with the Chinese name:

Due to device compatibility issues, some wireless networks with Chinese names or special characters may not be able to connect, it is recommended to change the wireless network name to English.

Please check whether the router connection is normal (the cat cannot be connected), turn off the phone and the router and restart it before trying to connect.

5.If none of the above operations work, it is recommended to back up important data (contacts, text messages, **, etc.) and try to restore factory settings.

If the problem persists, please bring the purchase invoice, warranty card and machine to the service center for inspection. "

Dear users, hello.

Hope the following can be helpful to you:

This may be that the browser used is not compatible, and it is recommended to try another browser.

Anhui Telecom will serve you wholeheartedly.

The reasons why the mobile phone cannot enter the router management interface are: wireless wifi and management that are not connected to the routerIP addressInput error, address entered to the wrong location, other reasons.

Wireless wifi that is not connected to the router: When the router leaves the factory, the wireless wifi function has been turned on by default, check the sticker at the bottom of the machine to check the password, turn on the wireless wifi function of the mobile phone, and search for the wireless wifi signal that needs to be connected to the lock.

Management IP address input error: The router management IP address is not the same as the address you entered, you can see the sticker on the router body to know that the specific management IP address is blind, enter the same address.

Other reasons: If the above methods do not work, it may be that the configuration of the router is confused due to other reasons, resulting in the user being unable to open the settings interface through the mobile phone, in this case, you can try to restore the router to factory settings.

reset) and then try to log in.

1. The phone is not connected to the router's wifi

When setting up the router, many white users do not connect to the router's wifi and enter it directly in the browser, so they can't enter the setting interface. Like this:

Generally speaking, the router has turned on the wifi function by default when it leaves the factory, and the wifi name can be viewed on the sticker at the bottom of the machine, and some routers do not have a password by default, so they can be connected directly. Turn on the Wi-Fi function of your phone, search for and connect to your home's Wi-Fi signal. (ps：

Tengda AC6 AC9 AC15 AC18 default wifi name password can be queried on the surface or bottom of the machine).

Under normal circumstances, as long as the mobile phone is connected to the router's wifi, then you can enter the settings interface after entering the address in the browser, if it still doesn't work, please look down.

2. The management IP address is entered incorrectly.

The management IP address of routers on the market is generally defined byAnd so on, different manufacturers have different management IPs. If the management IP address of your router is, but you enter it, then you will definitely not be able to open the management interface.

But if you have changed the management IP address before, but now you have forgotten it, what should I do?

First of all, the mobile phone is connected to the WiFi of the router, and the management IP of the router can be found by viewing the detailed information after connecting to the WiFi (as shown in the red box in the figure below), as shown in the following figure:

3. Enter the address in the wrong place.

Usually Teng Xiaomei is answering questions for everyone,I found that some users did not put the management address of the router (input into the browser's "address bar",But enter the address into the search engine's "search bar",This is definitely not possible to open the management interface,Like this:

4. Unknown reasons.

Due to other unknown reasons, the configuration of the router may be confused, resulting in the user not being able to open the settings interface through the mobile phone, in this case, you can try to restore the router to factory settings (reset), and then try to log in.

Method of factory reset:

With the router powered on, press and hold the reset button on the back of the router for 10-15 seconds, and then try to log in to the router interface again.

Summary. As described, the router has settings that can be accessed by the external network, so you can directly access the router's management interface through a fixed broadband IP.

If it is not actively turned on or set, then it can only be connected by wire. Make an adapter for the mobile phone, Type-C to the network port, connect the mobile phone at one end, and connect the network cable at the other end. Connect the network cable to the LAN port of the router. Then, through the login address, access the router management interface.

Because to set up a router, you first have to connect to it. So if you can't connect to wifi, there are only these two ways.

How to use your phone to log in to the router settings interface if your phone is not connected to the router?

As described, the router has set up Kehe macro extranet access settings, so you can directly access the router's management interface through a fixed broadband IP. If it is not actively turned on or set, then it can only be connected by wire. Make an adapter for the mobile phone, Type-C to the network port, connect the mobile phone at one end, and connect the network cable at the other end.

Connect the network cable to the LAN port of the router. Then, through the login address, access the router management interface. Because to set up a router, you first have to connect to it.

So if you can't connect to Qipaifeng wifi, there are only these two ways.

I seem to have turned off the network on the router settings page, and now the wireless network can't be searched, and the settings page can't be entered.

I seem to have turned off the network on the router settings page, and now the wireless network can't be searched, and the settings page can't be entered.

Reset the router, there is a REST button on the back of the router. Poke it in with a toothpick, press and hold for more than 5 seconds, and the router light will flash. Then put it in and wait 2 minutes.

After the router resets the bridge, the wifi signal is available again. You can go to the router settings and set it up.

Here's how to set up your phone to enter the router:Operating device: Honor 10.

Device system: Android.

Operating software: router: Honor router pro2.

1. After opening the phone, select the phone's settings icon to enter.

2. In the settings interface, click the WLAN option to enter.

3. After powering on the router, select the router's WiFi network to connect.

4. After the connection is successful, select the browser that comes with the mobile phone to enter.

5. After entering, enter the management of the router and press OK.

6. After confirmation, you can enter the router settings and select the broadband dialing method.

7. After entering, enter the broadband and password, and click to connect.

8. After waiting for the connection to be successful, select the option below to set up wifi.

9. After entering the settings interface, enter the wifi name and password, and click the save option.

10. After saving, you can complete the router setting operation through your mobile phone.

Some routers can't enter the settings page after they are set up, you do this: plug in the wireless router and power it on, don't connect the cat or home network cable first, connect the mobile phone to the wireless router, enter the gateway address in the browser (the router gateway address is on the label behind the router), and enter the settings page. If you still can't get in, reset the wireless router (factory reset) and enter, but then you will have to set up the wireless router again.

1. For common ordinary WiFi routers, mobile phones or computers are connected to WiFi routersOr the gateway IP address of the computer network card is leaked to log in to the WiFi router.

2. Turn off the WiFi router and restart it to avoid being unable to log in due to the fake death of the WiFi router.

3. If the management IP of the broadband modem and the wifi router is the same, it will naturally not be able to log in to the broadband modem. You can turn off the power of the broadband modem firstOr log in to the WiFi router with the gateway IP address of the computer network card, change the LAN port IP of the WiFi router to save the settings, and restart the router.

In this way, the management IP of the telecom Tianyi Zhengcheng broadband cat is:, and the management IP of the wifi routing plexus clearer is.

Summary. To set up a router with a mobile phone, you need to open the mobile phone browser first, then enter the IP address of the router, and then click the setup wizard, in the pop-up interface, click the second item in the selection list to enter, enter the password, and then enter the LAN name in the wireless settings, click the wireless security settings, and finally set the password.

To set up the Luna Absolute Toucher with your mobile phone, you need to open the mobile phone browser first, then enter the IP address of the router, and then click the setup wizard, in the pop-up interface, select the second item of the macro empty list, click Eliminate Talk to enter, enter the password, and then enter the LAN name in the wireless settings, click on the wireless security settings, and finally set the password.

Sometimes this situation occurs, that is, when the SSID and wireless password are known, the mobile phone is connected to the wireless router, but it enters the setting interface, and the following is shared with you to enter the mobile router settings interface, welcome to refer to it!

After we make sure that the phone is connected to the wireless router, click the phone's settings button as shown below

Then click"wlan"：

Click the right-facing arrow on the far right of the connected wireless name

After the network details screen appears, swipe up on your phone to find "DHCP" and tap :

Then click on DHCP in the interface that appears. "Static":

Then there appeared the details of the IP address obtained by the phone, insideGatewaysIt's the wireless router we're looking for to log in to IP:

We open the browser of the Xiaomi mobile:

Type in the browser address bar what we foundIP addressThat is, the gateway I just found:

In this way, our mobile phone is logged into the settings interface of our wireless router: