When you log in to the router interface of 192 168 1 1, you will enter the page of China Telecom

Dear users, hello:

Here's how.

1. Line problems: optical fiber or ** cable is connected to the cat, the cat is connected to the wireless router with a network cable, and the wireless router is connected to the computer with a network cable.

2. How to set up the wireless router: open the computer, open the IE browser, enter the address on the back of the wireless router, generally, you need to enter the account and password after opening, and the account and password are in the wireless router. The wireless router setup screen opens.

In the Wireless Router Settings Selection Wizard, remember to enter your Internet access dial-up account and password while selecting Next.

3. Internet access: After the wireless router is set up, pass through the network cable; Connected computers can access the Internet directly. Wirelessly connect computers and mobile phones, select your wireless router in the wireless signal, enter the connection password, the name of the wireless router and the connection password on the back of the wireless router.

In the wireless router settings screen, you can also change the name and connection password of the router.

Anhui Telecom will serve you wholeheartedly, I hope the above will be helpful to you!

If you have any other questions, please come to the platform or Anhui Telecom's online business hall for consultation;

Dear users, hello; First of all, thank you for your support to China Telecom, according to your description, first, you can restore the wireless router, and then set the LAN port settings of the wireless router without connecting the optical modem, and set the IP address to it;

Second, then connect the optical modem, and then you can enter the wireless router, I wish you a happy life.

If you have other questions, please continue to ask questions on this platform, or log in to the online business hall of Anhui Telecom. Hope mine is helpful to you.

It is recommended to change the LAN port IP of the router to another address, such as so that there will be no conflict, and when there is an IP conflict, you need to shut down the modem to log in to the background of the router, and you can successfully log in to the router background after the modem is shut down.

1. The connection between the router and the computer is normal, open the computer browser and enter the router login address, and then enter the login password to log in to the background of the router.

2. Find the routing settings, and then click LAN port settings.

3. Then select Manual, then modify the LAN port address, and finally click Save, restart the router to take effect.

1, The first cause of this problem is the conflict between the router and the front-end device address, so please turn off the optical modem or router first.

2, then open your computer browser, type, and click Enter.

3, and enter the administrator password in the pop-up window to enter the router management interface.

4, and then click System Settings on the left side of the pop-up window, and then click Modify Management Address, modify the management address to solve the problem.

Sometimes win7 computer login to the router interface, found that after typing in the browser, the China Telecom login page appeared, not the router's login interface, what happened? Don't worry, in response to this problem, let's share with you the solution to the China Telecom login page that appears after win7 is entered in the browser.

Recommended:

Fault cause: When setting up the router, the input of China Telecom interface appears because the user uses the optical modem of China Telecom; In addition, the IP address of the optical modem is also the same as the IP address of the router, which is caused by conflict.

Solution: Since it is caused by the IP address conflict between the router and the telecom optical modem, you only need to modify the IP address of the router to solve the problem. If amended to; After the modification, enter it in the browser to enter the router settings page.

1. Disconnect the connection between the router and the telecom optical modem, and only let the computer connect to one of the ports of the router;

2. At this time, enter in the browser, you can enter the setting interface of the router, as shown in the figure below;

Note the problem: After modifying the IP address of the router LAN port, it will prompt a restart, and after the restart is completed, you need to enter it in the browser to log in to the settings interface of the router.

4. Reconnect the telecom optical modem to the WAN port of the router, and then enter the router settings interface to set the router to surf the Internet.

The above is the solution to win7 in the browser after entering the China Telecom login page,After a simple setting,The router interface will appear after entering the browser,Everything is back to normal。

This is because the IP address of your telecom modem is the same as the IP address of the router, and it is already very good that there is no failure, and you should change one.

Solution: First, disconnect the network cable between the cat and the router.

Then, enter it to log in to the router, find the "LAN port settings", and you can change the IP address of the router, which can be equal to .. Anyway, it can't be equal to 1, and it can't be greater than 254).

Finally, save and restart the router and connect the disconnected network cable.

Telecom Cat Login Address).

Router login address).

The telecom cat IP address router IP address is not faulty, and it has been wrong, and it should be corrected to solve it:

First of all, the network cable between the cat routers is disconnected.

Enter the login router to find the LAN port setting, change the router IP address, and change it to equal to .The anti-energy is equal to 1, and the energy can be 254).

Save and restart the original disconnected network connection of the router.

Telecom Cat Landing Site).

Router login address).