How to correct the touch screen of car navigation?

Find Reboot (Factory Reset) on your machine.

The button, which is a small built-in button, can be found on the back or side of the machine, and all GPS navigators have this button (used after crashing). 2. After the button is restarted, see if the screen has a response, and if there is a response, seize the time to calibrate the screen in the settings, and it will be fine after calibration. 3. If the screen does not respond after restarting, if the battery can be taken down, then charge the battery separately, and be sure to charge it with a cradle; If the battery can't be taken off, charge it with a wire, and the charging time must be long; If it doesn't work, then it can only be repaired.

Car navigation screen failure correction method:

1. First of all, confirm how much difference there is between the position of the pen point on the screen and the position displayed on the screen, for example, when the pen point touches the screen, the screen shows its position on the left one centimeter;

2. Enter the calibration program, the screen will display five crosses, do not point the center of the cross, point the center of the cross to the right of one centimeter (opposite to the position of the first step) position, after the five points, the correction program will automatically exit, the correction is completed;

3. Classification according to the model navigation special car special type *** navigation: a machine with a model most of the original car cd general type: the frame can be modified to various models, split machine:

Special car navigation subdivision products, do not dismantle the original car CD and other parts, upgrade the best navigation products.

1. Swipe left with your finger on the screen on the navigation display.

2. Find the "Settings" option in the display and tap to select it.

3. At this time, the screen enters the settings page, and we can see many setting options.

5. Find the "Touch Calibration" option and choose to tap it.

6. At this time, a confirmation calibration prompt appears on the screen, and we click on the "OK" option.

7. Finally, in the calibration prompt that appears, we click on the corresponding position according to the prompt to complete the calibration.

First, first confirm how much difference the position of the pen point on the screen and the position displayed on the screen is larger, than the sock key regrets that when the pen point touches the screen, the screen shows its position on the left one centimeter.

2. Enter the calibration program, the screen will show five crosses, do not point to the center of the cross, point the center of the cross to the right of one centimeter (opposite to the direction of the position of the first step), after the five points, the correction program will automatically exit, and the correction will be completed.

1. Swipe your finger left on the navigation display.

2. Click on the "Settings" option.

3. Enter the settings page.

4. Swipe up on the screen with your finger.

5. Click on the "Touch Calibration" option.

6. A prompt appears on the screen, click on the "OK" option.

7. Click on the corresponding position according to the prompts to complete the calibration.

The car BAI navigation screen correction return method is as follows:

Tap the cross when the screen is corrected, and when you click about 5 times, the system will automatically return.

There's about navigation:

Navigation is the method of directing a device from one point of a given route to another. There are two types of navigation: (1) Autonomous navigation

Navigation with equipment on aircraft or ships, including inertial navigation, Doppler navigation and astronomical navigation; (2) Non-autonomous navigation: used for aircraft, ships, automobiles and other transportation equipment to cooperate with the relevant ground or air equipment for navigation, including radio navigation and satellite navigation. Militarily, it is also necessary to cooperate in the completion of such tasks as projection, reconnaissance, patrol, anti-submarine and rescue.

Navigation has two meanings, one is the method of guiding an aircraft or ship to move from one point to another along a certain course. And the other meaning is due to the rise of the Internet and the rise of **navigation, to help the Internet to find the web page they want to browse, want to find the information, basically each ** has its own ** navigation system for the web page to provide navigation services, there are also professional navigation ** to provide professional navigation services.

Car GPS navigator: With the popularization of cars and the construction of roads, inter-city economic exchanges are more frequent, and the area of activity is getting larger and larger; In order to improve the quality of life, a large number of leisure activities, adventure activities so that we are not limited to a small area of their own knowledge, do not know the road, can not find the destination of the situation also occurs frequently, in this regard, the car GPS navigation will be at the right price into the world of the owner, become the basic equipment on the car. Car GPS navigation solution, in fact, is the most flexible and complex, car GPS navigation has many solutions to meet the needs of the vehicle.

Put five fingers on the main interface, press and hold for 10 seconds, and the calibration interface will appear.

Hello, the touch screen calibration of the car navigation, this is available in the settings, a separate option. After opening, click on the plus sign in the middle to complete. There are also additions that you don't understand to help you answer, and the car master will walk with you all the way. I wish you all the best.