What should I do if the walls are too wet in spring, and what should I do if the walls of my house r

When you are at home, you can leave the doors and windows open to keep the air in the room convective, which can play a role in preventing mold. Once mold grows, the only way to do it is to redo the wall paint.

Put more bamboo charcoal at home, which can absorb moisture in the air and purify the air very well. When the sun is high, take it out to dry and reuse it repeatedly.

This is because the humidity of the environment is relatively high, and at the same time, the sun is less in winter. We should shovel off all the existing walls, re-scrape the putty, and wait for the putty to dry before applying moisture-proof paint.

To solve this situation, you must first clean up these mold spots, and then use a rag dipped in a small amount of white vinegar and wind oil essence and then wipe the wall, which can effectively prevent this situation.

If there is a leak in the drainage pipe or heating pipe, the wall will become damp and moldy. This situation can be ruled out by doing a pressure test, if it is external rainwater seeping into the room, causing the wall to be damp and mildew, it needs to be solved by professionals.

This is because the home is damp. We usually need to keep the walls warm and waterproof. This prevents these things from happening.

Re-scrape the putty and make it waterproof.

You can buy a wall-hung stove for your home to make your home warmer and absorb the moisture in the wall, so that it will not return to moisture and mold.

First of all, it is necessary to find the cause of the dampness of the wall, and if it is caused by water leakage, it is necessary to find a master to deal with it in time. If it's because of the weather, here are a few things you can do: Intermittent ventilation:

Afternoon is the best time to close the doors and windows facing south or southeast on rainy days to reduce moisture entering the room. At noon, the air humidity outside is at the highest value, and it is not appropriate to open the window, so it should be opened in the afternoon or evening, when the climate is relatively dry, open the window to adjust the indoor air. Lime moisture absorption:

On rainy days, you can wrap quicklime in cloth or sacks and place it in various places indoors to keep the indoor air dry. Air conditioner dehumidification: It is simpler than the previous two methods, but it consumes electricity, so it is recommended to use other environmentally friendly and moisture-proof methods to save energy.

Practical moisture-proof small objects Moisture absorption box: a must-have for wardrobe dehumidification. The more common hygroscopic products on the market are generally made of calcium chloride granules as the main content, and most of them also add flavor ingredients, so they integrate functions such as dehumidification, aromatherapy, mildew resistance, and deodorization.

Moisture absorber boxes are mostly used for moisture absorption in wardrobes and shoe cabinets. To use it, simply put it in the cabinet. Moisture Absorbent Pack:

Confined spaces work best. The principle of the hygroscopic bag is similar to that of the humidity absorbent box, but the contents are mainly water-absorbing resin, and after absorbing water, it becomes jelly-like and is not easy to disperse into pieces. In addition to clothing, leather goods, stamps, cameras, pianos, computers, audio-visuals, etc. can be used to help dehumidify.

If placed in a confined space, the moisture absorption effect is better. The way to solve the problem thoroughly: shovel off the wall skin, do waterproofing, and then scrape putty to brush the paint.

Temporary method: Use 84 disinfectant bleach solution and apply it to the moldy area (you can brush it several times) to lighten the color of the mold. The above methods are for reference only, you can choose the right dehumidification method for your home.

Hello, I am glad to serve you and give you the following answers: 1. Briefly introduce the reasons for the problem: the damp and mildew of the wall is caused by the dampness of the wall, which is generally caused by poor wall drainage, poor ventilation, excessive moisture and other factors.

2. Solution and practice steps: (1) First of all, the grinding and rolling should be checked to check whether the wall drainage is normal, and if it is not normal, it should be repaired in time; (2) Secondly, check whether the indoor ventilation is good, if not, open the windows and exhaust vents in time; (3) Then, check whether there is too much humidity in the room, and if it is too much, it should be used in time. (4) Finally, the wall should be inspected for mold infection, and if so, it should be treated with antibacterial agents in time. 3. Personal tips:

1) The indoor humidity should be controlled below 60%, which can effectively prevent the wall from being damp and moldy; (2) Regularly inspect the drainage of the wall and repair the poor drainage in time; (3) Open windows frequently for ventilation to maintain indoor air circulation and reduce moisture; (4) Use antibacterial agents to treat wall mold in a timely manner.

Kiss! Hello, happy to answer your <>

Kiss! 1. How to deal with the damp and moldy wall in the house 1. First use sandpaper to polish the moldy and falling off places, and shovel off the moldy wall with a shovel until you can see the cement layer or brick layer. 2. The cleaned wall is often not particularly smooth, and the putty must be re-brushed.

After the putty is brushed, the primer can be applied. 3. After drying, paint latex paint, diatom mud or wallpaper according to personal preference. 2. What are the ways to prevent dampness and mildew on the wall 1. Use dehumidifier, if the room is damp, you can use desiccant and activated carbon to prevent and absorb moisture.

It is also possible to use desiccant and activated carbon. There are many desiccants in supermarkets that are specially used for moisture-proof and dehumidification, and the more common ones are moisture absorption boxes and dehumidification packs. 2. Buy an air dehumidifier, it is like a vacuum cleaner that can directly concentrate the humid air into a round, and when the humidity is high, it will naturally turn into water.

Using air conditioners to dehumidify, household air conditioners usually have a dehumidification function, but the way the air conditioner adjusts the indoor air humidity is relatively slow, it takes two or three hours, and it will make people feel that it is still very cold indoors. 3. Use lime and bamboo charcoal to dehumidify, use a small cloth bag to fill with an appropriate amount of lime, tie it into a small bag and put it in all corners of the room. Lime itself has a hygroscopic effect and can also reduce indoor humidity.

At the same time, lime also has a disinfecting effect. Bamboo charcoal dehumidification can be used directly and repeatedly, and the effect is not very good if you use too much. 4. When the outside moisture is heavy, the doors and windows should be closed first to prevent moisture and moisture.

In normal times, it is necessary to open the windows for ventilation and ventilation to reduce the indoor water vapor content, especially in the newly renovated house, where the water vapor is relatively large, and it is necessary to ventilate more. Hope mine can help you <>

Do you have any other questions?